renegade-project/linux-snapdragon
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

treewide: Fix typo in printk

Browse Source 
This patch fix spelling typo in printk within vairous
part of the code.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Masanari Iida 2014-08-06 22:31:28 +09:00 committed by Jiri Kosina
parent 50d8a18901
commit 9b13494c91
14 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/blackfin/mach-common/ints-priority.c
View File

@ -455,7 +455,7 @@ void handle_sec_sci_fault(uint32_t gstat)
printk(KERN_DEBUG "sec ack err\n");
break;
default:
printk(KERN_DEBUG "sec sci unknow err\n");
printk(KERN_DEBUG "sec sci unknown err\n");
}
}

2
drivers/gpu/drm/i915/intel_bios.c
View File

@ -945,7 +945,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
port_name(port));
if (is_dvi && (port == PORT_A || port == PORT_E))
DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port));
DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port));
if (!is_dvi && !is_dp && !is_crt)
DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
port_name(port));

2
drivers/i2c/busses/i2c-s3c2410.c
View File

@ -244,7 +244,7 @@ static bool is_ack(struct s3c24xx_i2c *i2c)
}
usleep_range(1000, 2000);
}
dev_err(i2c->dev, "ack was not recieved\n");
dev_err(i2c->dev, "ack was not received\n");
return false;
}

2
drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
View File

@ -511,7 +511,7 @@ int usnic_ib_qp_grp_modify(struct usnic_ib_qp_grp *qp_grp,
usnic_ib_qp_grp_state_to_string(old_state),
usnic_ib_qp_grp_state_to_string(new_state));
} else {
usnic_err("Failed to transistion %u from %s to %s",
usnic_err("Failed to transition %u from %s to %s",
qp_grp->grp_id,
usnic_ib_qp_grp_state_to_string(old_state),
usnic_ib_qp_grp_state_to_string(new_state));

2
drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
View File

@ -259,7 +259,7 @@ static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
fine = val % VV6410_CIF_LINELENGTH;
coarse = min(512, val / VV6410_CIF_LINELENGTH);
PDEBUG(D_CONF, "Set coarse exposure to %d, fine expsure to %d",
PDEBUG(D_CONF, "Set coarse exposure to %d, fine exposure to %d",
coarse, fine);
err = stv06xx_write_sensor(sd, VV6410_FINEH, fine >> 8);

2
drivers/net/bonding/bond_sysfs_slave.c
View File

@ -36,7 +36,7 @@ static ssize_t state_show(struct slave *slave, char *buf)
case BOND_STATE_BACKUP:
return sprintf(buf, "backup\n");
default:
return sprintf(buf, "UNKONWN\n");
return sprintf(buf, "UNKNOWN\n");
}
}
static SLAVE_ATTR_RO(state);

2
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
View File

@ -922,7 +922,7 @@ int netxen_config_ipaddr(struct netxen_adapter *adapter, __be32 ip, int cmd)
rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0) {
printk(KERN_ERR "%s: could not notify %s IP 0x%x reuqest\n",
printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n",
adapter->netdev->name,
(cmd == NX_IP_UP) ? "Add" : "Remove", ip);
}

2
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
View File

@ -941,7 +941,7 @@ void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter,
rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0)
dev_err(&adapter->netdev->dev,
"could not notify %s IP 0x%x reuqest\n",
"could not notify %s IP 0x%x request\n",
(cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip);
}

2
drivers/net/wireless/libertas_tf/main.c
View File

@ -332,7 +332,7 @@ static int lbtf_op_start(struct ieee80211_hw *hw)
err_prog_firmware:
priv->hw_reset_device(card);
lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programing fw; ret=%d", ret);
lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programming fw; ret=%d", ret);
return ret;
}

2
drivers/scsi/aic7xxx/Kconfig.aic79xx
View File

@ -70,7 +70,7 @@ config AIC79XX_DEBUG_MASK
default "0"
help
Bit mask of debug options that is only valid if the
CONFIG_AIC79XX_DEBUG_ENBLE option is enabled. The bits in this mask
CONFIG_AIC79XX_DEBUG_ENABLE option is enabled. The bits in this mask
are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
variable ahd_debug in that file to find them.

2
drivers/scsi/nsp32.c
View File

@ -930,7 +930,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
/* check target ID is not same as this initiator ID */
if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
SCpnt->result = DID_BAD_TARGET << 16;
done(SCpnt);
return 0;

2
drivers/scsi/pcmcia/nsp_cs.c
View File

@ -533,7 +533,7 @@ static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
} while ((--time_out != 0) && (reg & mask) != 0);
if (time_out == 0) {
nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
nsp_msg(KERN_DEBUG, " %s signal off timeout", str);
}
return 0;

2
drivers/scsi/qla2xxx/qla_nx2.c
View File

@ -399,7 +399,7 @@ qla8044_idc_lock(struct qla_hw_data *ha)
*/
ql_dbg(ql_dbg_p3p, vha, 0xb08a,
"%s: IDC lock Recovery by %d "
"failed, Retrying timout\n", __func__,
"failed, Retrying timeout\n", __func__,
ha->portnum);
timeout = 0;
}

2
net/mac802154/wpan.c
View File

@ -90,7 +90,7 @@ mac802154_wpan_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
case SIOCSIFADDR:
dev_warn(&dev->dev,
"Using DEBUGing ioctl SIOCSIFADDR isn't recommened!\n");
"Using DEBUGing ioctl SIOCSIFADDR isn't recommended!\n");
if (sa->family != AF_IEEE802154 ||
sa->addr.addr_type != IEEE802154_ADDR_SHORT ||
sa->addr.pan_id == IEEE802154_PANID_BROADCAST ||