arm64: dts: qcom: sdm845: Create sdm845-xiaomi-common.dtsi to avoid code duplication
WARNING: This commit is UNTESTED It is yet to be tested by BigfootACA Signed-off-by: Xilin Wu <strongtz@yeah.net>
This commit is contained in:
parent
77a9731666
commit
09ad356800
626
arch/arm64/boot/dts/qcom/sdm845-xiaomi-common.dtsi
Normal file
626
arch/arm64/boot/dts/qcom/sdm845-xiaomi-common.dtsi
Normal file
@ -0,0 +1,626 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2021, Xilin Wu <strongtz@yeah.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/sound/qcom,q6asm.h>
|
||||
#include <dt-bindings/sound/qcom,q6afe.h>
|
||||
#include "sdm845.dtsi"
|
||||
|
||||
// Needed for some GPIO (like the volume buttons)
|
||||
#include "pm8998.dtsi"
|
||||
#include "pmi8998.dtsi"
|
||||
#include "pm8005.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart9;
|
||||
hsuart0 = &uart6;
|
||||
bluetooth0 = &bluetooth;
|
||||
wifi0 = &wifi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
// For simplefb hack
|
||||
stdout-path = "display0";
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vbat: vbat-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vbat_som: vbat-som-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT_SOM";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdc_3v3: vdc-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_3V3";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdc_5v: vdc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_5V";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/*
|
||||
* Apparently RPMh does not provide support for PM8998 S4 because it
|
||||
* is always-on; model it as a fixed regulator.
|
||||
*/
|
||||
vreg_s4a_1p8: pm8998-smps4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_up_pin_a>;
|
||||
|
||||
vol-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-s11-supply = <&vph_pwr>;
|
||||
vdd-s12-supply = <&vph_pwr>;
|
||||
vdd-s13-supply = <&vph_pwr>;
|
||||
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l6-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd-l9-supply = <&vreg_bob>;
|
||||
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
||||
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
||||
vdd-l16-l28-supply = <&vreg_bob>;
|
||||
vdd-l18-l22-supply = <&vreg_bob>;
|
||||
vdd-l20-l24-supply = <&vreg_bob>;
|
||||
vdd-l26-supply = <&vreg_s3a_1p35>;
|
||||
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s2a_1p1: smps2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
vreg_s3a_1p35: smps3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_s5a_2p04: smps5 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
};
|
||||
|
||||
vreg_s7a_1p025: smps7 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
};
|
||||
|
||||
vdda_ufs1_core:
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_0p875: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_l3a_0p875: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p8: ldo6 {
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <1856000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p2: ldo8 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1248000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_2p95: ldo9 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_2p95: ldo10 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p05: ldo11 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1048000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p9: ldo18 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p1: ldo19 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22a_3p3: ldo22 {
|
||||
regulator-min-microvolt = <2864000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l23a_3p3: ldo23 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_mipi_dsi0_1p2:
|
||||
vdda_ufs1_1p2:
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_l28a_3p0: ldo28 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_lvs1a_1p8: lvs1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_lvs2a_1p8: lvs2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
pmi8998-rpmh-regulators {
|
||||
compatible = "qcom,pmi8998-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
};
|
||||
|
||||
pm8005-rpmh-regulators {
|
||||
compatible = "qcom,pm8005-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vreg_smp3c_0p6: smps3 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <600000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpi_dma0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
/* Audio Codec tas2559/2557 */
|
||||
&i2c5 {
|
||||
#dma-cells = <3>;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
|
||||
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
/* touchscreen */
|
||||
&i2c14 {
|
||||
#dma-cells = <3>;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
|
||||
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
vol_up_pin_a: vol-up-active {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_pon {
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
|
||||
bluetooth: bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l17a_1p3>;
|
||||
vddch0-supply = <&vreg_l25a_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
/* We'll use this as USB 2.0 only */
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "host";
|
||||
|
||||
/* fastest mode for USB 2 */
|
||||
maximum-speed = "high-speed";
|
||||
|
||||
/* Remove USB3 phy */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l26a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <800000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vdda_ufs1_core>;
|
||||
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
};
|
||||
|
||||
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
||||
|
||||
&qup_uart6_default {
|
||||
pinmux {
|
||||
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
||||
function = "qup6";
|
||||
};
|
||||
|
||||
cts {
|
||||
pins = "gpio45";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rts-tx {
|
||||
pins = "gpio46", "gpio47";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx {
|
||||
pins = "gpio48";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/* Reserved memory changes */
|
||||
/*
|
||||
* The memory regions related to the modem have to be changed
|
||||
* according to the adresses in downstream as
|
||||
* the modem is hard-coded to expect these regions to be at those adresses.
|
||||
*
|
||||
*/
|
||||
/delete-node/ &rmtfs_mem;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &slpi_mem;
|
||||
/delete-node/ &spss_mem;
|
||||
|
||||
/ {
|
||||
reserved-memory {
|
||||
rmtfs_mem: memory@f6301000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0xf6301000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
adsp_mem: memory@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1e00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@8e300000 {
|
||||
reg = <0 0x8e300000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_region: memory@8e400000 {
|
||||
reg = <0 0x8e400000 0 0x7800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@95c00000 {
|
||||
reg = <0 0x95c00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: memory@96100000 {
|
||||
reg = <0 0x96100000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: memory@96900000 {
|
||||
reg = <0 0x96900000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: memory@96b00000 {
|
||||
reg = <0 0x96b00000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: memory@97f00000 {
|
||||
reg = <0 0x97f00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* hack: bootloader framebuffer */
|
||||
cont_splash_region: memory@9d400000 {
|
||||
compatible = "removed-dma-pool";
|
||||
reg = <0 0x9D400000 0 0x02400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops: ramoops@b0000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0xb0000000 0 0x00400000>;
|
||||
record-size = <0x40000>; /*256x1024*/
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x40000>;
|
||||
pmsg-size = <0x200000>;
|
||||
ecc-size = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -3,41 +3,19 @@
|
||||
* Copyright (c) 2021, BigfootACA <bigfoot@classfun.cn>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/sound/qcom,q6asm.h>
|
||||
#include <dt-bindings/sound/qcom,q6afe.h>
|
||||
#include "sdm845.dtsi"
|
||||
#include "pm8998.dtsi"
|
||||
#include "pmi8998.dtsi"
|
||||
#include "pm8005.dtsi"
|
||||
#include "sdm845-xiaomi-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xiaomi MIX3";
|
||||
compatible = "xiaomi,perseus", "qcom,sdm845-mtp", "qcom,sdm845", "qcom,mtp";
|
||||
model = "Xiaomi MIX 3";
|
||||
compatible = "xiaomi,perseus", "qcom,sdm845-mtp", "qcom,sdm845";
|
||||
/* required for bootloader to select correct board */
|
||||
qcom,board-id = <0x63 0x0>;
|
||||
qcom,msm-id = <0x141 0x20001>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart9;
|
||||
hsuart0 = &uart6;
|
||||
bluetooth0 = &bluetooth;
|
||||
wifi0 = &wifi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
stdout-path = "display0";
|
||||
framebuffer0: framebuffer@9d400000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x9D400000 0 0x02400000>;
|
||||
reg = <0 0x9D400000 0 0x2400000>;
|
||||
width = <1080>;
|
||||
height = <2340>;
|
||||
stride = <(1080 * 4)>;
|
||||
@ -46,63 +24,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vbat: vbat-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vbat_som: vbat-som-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT_SOM";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdc_3v3: vdc-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_3V3";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdc_5v: vdc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_5V";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/*
|
||||
* Apparently RPMh does not provide support for PM8998 S4 because it
|
||||
* is always-on; model it as a fixed regulator.
|
||||
*/
|
||||
vreg_s4a_1p8: pm8998-smps4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
vin-supply = <&vph_pwr>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
disp_vci_vreg: disp_vci_vreg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "disp_vci_vreg";
|
||||
@ -157,298 +78,12 @@
|
||||
|
||||
&adsp_pas {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/adsp.mbn";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-s11-supply = <&vph_pwr>;
|
||||
vdd-s12-supply = <&vph_pwr>;
|
||||
vdd-s13-supply = <&vph_pwr>;
|
||||
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l6-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd-l9-supply = <&vreg_bob>;
|
||||
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
||||
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
||||
vdd-l16-l28-supply = <&vreg_bob>;
|
||||
vdd-l18-l22-supply = <&vreg_bob>;
|
||||
vdd-l20-l24-supply = <&vreg_bob>;
|
||||
vdd-l26-supply = <&vreg_s3a_1p35>;
|
||||
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s2a_1p1: smps2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
vreg_s3a_1p35: smps3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_s5a_2p04: smps5 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
};
|
||||
|
||||
vreg_s7a_1p025: smps7 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
};
|
||||
|
||||
vdda_ufs1_core:
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_0p875: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_l3a_0p875: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p8: ldo6 {
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <1856000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p2: ldo8 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1248000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_2p95: ldo9 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_2p95: ldo10 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p05: ldo11 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1048000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p9: ldo18 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p1: ldo19 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22a_3p3: ldo22 {
|
||||
regulator-min-microvolt = <2864000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l23a_3p3: ldo23 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l28a_3p0: ldo28 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
|
||||
vdda_mipi_dsi0_1p2:
|
||||
vdda_ufs1_1p2:
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_lvs1a_1p8: lvs1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_lvs2a_1p8: lvs2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
pmi8998-rpmh-regulators {
|
||||
compatible = "qcom,pmi8998-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
};
|
||||
|
||||
pm8005-rpmh-regulators {
|
||||
compatible = "qcom,pm8005-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vreg_smp3c_0p6: smps3 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <600000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&apps_smmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmi8998_haptics {
|
||||
status = "okay";
|
||||
qcom,wave-play-rate-us = <4878>;
|
||||
};
|
||||
|
||||
&pmi8998_fg {
|
||||
status = "okay";
|
||||
qcom,max-voltage-uv = <4400000>;
|
||||
qcom,min-voltage-uv = <3700000>;
|
||||
qcom,battery-capacity-ua = <3200000>;
|
||||
};
|
||||
|
||||
&pmi8998_lpg {
|
||||
status = "okay";
|
||||
qcom,power-source = <1>;
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
label = "white";
|
||||
};
|
||||
firmware-name = "qcom/sdm845/xiaomi/adsp.mbn";
|
||||
};
|
||||
|
||||
&cdsp_pas {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/cdsp.mbn";
|
||||
firmware-name = "qcom/sdm845/xiaomi/cdsp.mbn";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
@ -485,26 +120,10 @@
|
||||
vdds-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
&gpi_dma0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/a630_zap.mbn";
|
||||
firmware-name = "qcom/sdm845/xiaomi/a630_zap.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
@ -514,21 +133,7 @@
|
||||
memory-region = <&ipa_fw_mem>;
|
||||
};
|
||||
|
||||
/* NFC */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
/* Audio Amplifier tas2557 */
|
||||
&i2c5 {
|
||||
#dma-cells = <3>;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
|
||||
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
tas2557_codec: tas2557@4c{
|
||||
#sound-dai-cells = <1>;
|
||||
compatible = "ti,tas2557";
|
||||
@ -540,20 +145,8 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* smb1355 and lm3644 LED */
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
/* fts touchscreen */
|
||||
&i2c14 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
|
||||
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
fts@49 {
|
||||
compatible = "st,fts";
|
||||
reg = <0x49>;
|
||||
@ -596,26 +189,27 @@
|
||||
|
||||
&mss_pil {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/mba.mbn", "qcom/modem.mbn";
|
||||
firmware-name = "qcom/sdm845/xiaomi/mba.mbn", "qcom/sdm845/xiaomi/modem.mbn";
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
vol_up_pin_a: vol-up-active {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
&pmi8998_fg {
|
||||
status = "okay";
|
||||
qcom,max-voltage-uv = <4400000>;
|
||||
qcom,min-voltage-uv = <3700000>;
|
||||
qcom,battery-capacity-ua = <3200000>;
|
||||
};
|
||||
|
||||
&pm8998_pon {
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
&pmi8998_haptics {
|
||||
status = "okay";
|
||||
qcom,wave-play-rate-us = <4878>;
|
||||
};
|
||||
|
||||
&pmi8998_lpg {
|
||||
status = "okay";
|
||||
qcom,power-source = <1>;
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
label = "white";
|
||||
};
|
||||
};
|
||||
|
||||
@ -640,14 +234,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
compatible = "qcom,db845c-sndcard";
|
||||
pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active>;
|
||||
@ -727,8 +313,6 @@
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
ts_int_active: ts_int_active {
|
||||
mux {
|
||||
pins = "gpio31";
|
||||
@ -873,70 +457,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
|
||||
bluetooth: bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l17a_1p3>;
|
||||
vddch0-supply = <&vreg_l25a_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
/* We'll use this as USB 2.0 only */
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
|
||||
/* fastest mode for USB 2 */
|
||||
maximum-speed = "high-speed";
|
||||
|
||||
/* Remove USB3 phy */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l26a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <800000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vdda_ufs1_core>;
|
||||
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||||
};
|
||||
|
||||
&wcd9340{
|
||||
pinctrl-0 = <&wcd_intr_default>;
|
||||
pinctrl-names = "default";
|
||||
@ -954,123 +474,3 @@
|
||||
qcom,micbias4-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
};
|
||||
|
||||
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
||||
&qup_uart6_default {
|
||||
pinmux {
|
||||
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
||||
function = "qup6";
|
||||
};
|
||||
|
||||
cts {
|
||||
pins = "gpio45";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rts-tx {
|
||||
pins = "gpio46", "gpio47";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx {
|
||||
pins = "gpio48";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/* Reserved memory changes */
|
||||
/*
|
||||
* The memory regions related to the modem have to be changed
|
||||
* according to the adresses in downstream as
|
||||
* the modem is hard-coded to expect these regions to be at those adresses.
|
||||
*
|
||||
*/
|
||||
/delete-node/ &rmtfs_mem;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &slpi_mem;
|
||||
/delete-node/ &spss_mem;
|
||||
|
||||
/ {
|
||||
reserved-memory {
|
||||
rmtfs_mem: memory@f6301000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0xf6301000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
adsp_mem: memory@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1e00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@8e300000 {
|
||||
reg = <0 0x8e300000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_region: memory@8e400000 {
|
||||
reg = <0 0x8e400000 0 0x7800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@95c00000 {
|
||||
reg = <0 0x95c00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: memory@96100000 {
|
||||
reg = <0 0x96100000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: memory@96900000 {
|
||||
reg = <0 0x96900000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: memory@96b00000 {
|
||||
reg = <0 0x96b00000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: memory@97f00000 {
|
||||
reg = <0 0x97f00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* hack: bootloader framebuffer */
|
||||
cont_splash_region: memory@9d400000 {
|
||||
compatible = "removed-dma-pool";
|
||||
reg = <0 0x9D400000 0 0x02400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops: ramoops@b0000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0xb0000000 0 0x00400000>;
|
||||
record-size = <0x40000>; /*256x1024*/
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x40000>;
|
||||
pmsg-size = <0x200000>;
|
||||
ecc-size = <0x0>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
|
||||
* Copyright (c) 2021, Xilin Wu <strongtz@yeah.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include "sdm845.dtsi"
|
||||
|
||||
// Needed for some GPIO (like the volume buttons)
|
||||
#include "pm8998.dtsi"
|
||||
#include "pmi8998.dtsi"
|
||||
#include "pm8005.dtsi"
|
||||
#include "sdm845-xiaomi-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xiaomi MIX 2s";
|
||||
@ -23,25 +12,10 @@
|
||||
qcom,board-id = <0x2a 0x0>;
|
||||
qcom,msm-id = <0x141 0x20001>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart9;
|
||||
hsuart0 = &uart6;
|
||||
};
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
// For simplefb hack
|
||||
stdout-path = "display0";
|
||||
|
||||
/* hack: use framebuffer setup by bootloader.
|
||||
* the address is taken from the bootloader config (strings xbl.img | grep "Display Reserved")
|
||||
*/
|
||||
framebuffer0: framebuffer@9d400000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x9D400000 0 0x02400000>;
|
||||
reg = <0 0x9D400000 0 0x2400000>;
|
||||
width = <1080>;
|
||||
height = <2160>;
|
||||
stride = <(1080 * 4)>;
|
||||
@ -50,14 +24,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
|
||||
vreg_tp_vddio: tp-vddio-vreg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_tp_vddio";
|
||||
@ -71,20 +37,6 @@
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/*
|
||||
* Apparently RPMh does not provide support for PM8150 S4 because it
|
||||
* is always-on; model it as a fixed regulator.
|
||||
*/
|
||||
vreg_s4a_1p8: pm8998-smps4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
@ -101,281 +53,6 @@
|
||||
|
||||
};
|
||||
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-s11-supply = <&vph_pwr>;
|
||||
vdd-s12-supply = <&vph_pwr>;
|
||||
vdd-s13-supply = <&vph_pwr>;
|
||||
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l6-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd-l9-supply = <&vreg_bob>;
|
||||
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
||||
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
||||
vdd-l16-l28-supply = <&vreg_bob>;
|
||||
vdd-l18-l22-supply = <&vreg_bob>;
|
||||
vdd-l20-l24-supply = <&vreg_bob>;
|
||||
vdd-l26-supply = <&vreg_s3a_1p35>;
|
||||
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s2a_1p1: smps2 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
vreg_s3a_1p35: smps3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_s5a_2p04: smps5 {
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
};
|
||||
|
||||
vreg_s7a_1p025: smps7 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
};
|
||||
|
||||
vdda_ufs1_core:
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_1p2: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l3a_1p0: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p8: ldo6 {
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <1856000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p2: ldo8 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1248000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p8: ldo9 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_2p95: ldo10 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p05: ldo11 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1048000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1880000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p9: ldo18 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p1: ldo19 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22a_3p3: ldo22 {
|
||||
regulator-min-microvolt = <2864000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l23a_3p3: ldo23 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_ufs1_1p2:
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l28a_3p0: ldo28 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_lvs1a_1p8: lvs1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vreg_lvs2a_1p8: lvs2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
pmi8998-rpmh-regulators {
|
||||
compatible = "qcom,pmi8998-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
};
|
||||
|
||||
pm8005-rpmh-regulators {
|
||||
compatible = "qcom,pm8005-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
|
||||
vreg_smp3c_0p6: smps3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&gpi_dma0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
// Keep these always on until we get panel driver working
|
||||
&ibb {
|
||||
regulator-always-on;
|
||||
@ -385,34 +62,8 @@
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* NFC */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
/* Audio Amplifier tas2559 */
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
/* smb1355 and p9220 */
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
/* touchscreen */
|
||||
&i2c14 {
|
||||
#dma-cells = <3>;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
|
||||
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
touchscreen: synaptics-dsi-i2c@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
@ -459,37 +110,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
vol_up_pin_a: vol-up-active {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_pon {
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
ts_default_pins: ts-int {
|
||||
mux {
|
||||
pins = "gpio99", "gpio125";
|
||||
@ -531,194 +152,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "disabled";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l17a_1p3>;
|
||||
vddch0-supply = <&vreg_l25a_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
/* We'll use this as USB 2.0 only */
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
|
||||
/* fastest mode for USB 2 */
|
||||
maximum-speed = "high-speed";
|
||||
|
||||
/* Remove USB3 phy */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l26a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <800000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vdda_ufs1_core>;
|
||||
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||||
};
|
||||
|
||||
&venus {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "disabled";
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
|
||||
qcom,snoc-host-cap-8bit-quirk;
|
||||
};
|
||||
|
||||
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
||||
|
||||
&qup_uart6_default {
|
||||
pinmux {
|
||||
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
||||
function = "qup6";
|
||||
};
|
||||
|
||||
cts {
|
||||
pins = "gpio45";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rts-tx {
|
||||
pins = "gpio46", "gpio47";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx {
|
||||
pins = "gpio48";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/* Reserved memory changes */
|
||||
/*
|
||||
* The memory regions related to the modem have to be changed
|
||||
* according to the adresses in downstream as
|
||||
* the modem is hard-coded to expect these regions to be at those adresses.
|
||||
*
|
||||
*/
|
||||
/delete-node/ &rmtfs_mem;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &slpi_mem;
|
||||
/delete-node/ &spss_mem;
|
||||
|
||||
/ {
|
||||
reserved-memory {
|
||||
rmtfs_mem: memory@f6301000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0xf6301000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
adsp_mem: memory@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1e00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@8e300000 {
|
||||
reg = <0 0x8e300000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_region: memory@8e400000 {
|
||||
reg = <0 0x8e400000 0 0x7800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@95c00000 {
|
||||
reg = <0 0x95c00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: memory@96100000 {
|
||||
reg = <0 0x96100000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: memory@96900000 {
|
||||
reg = <0 0x96900000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: memory@96b00000 {
|
||||
reg = <0 0x96b00000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: memory@97f00000 {
|
||||
reg = <0 0x97f00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* hack: bootloader framebuffer */
|
||||
cont_splash_region: memory@9d400000 {
|
||||
compatible = "removed-dma-pool";
|
||||
reg = <0 0x9D400000 0 0x02400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops: ramoops@b0000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0xb0000000 0 0x00400000>;
|
||||
record-size = <0x40000>; /*256x1024*/
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x40000>;
|
||||
pmsg-size = <0x200000>;
|
||||
ecc-size = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user