2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/drivers/net/bnx2x_fw_defs.h
Eliezer Tamir f14106478e [BNX2X]: Correct Link management
Properly protect PHY access between two devices on the same board with
a HW lock.

Use GPIO to clear all previous configurations before changing link
parameters.

Shut down the external PHY in case of fan failure.

Reducing the MDC/MDIO clock to 2.5MHz due to problems with some
devices.

Resolve the flow control response according to autoneg with external
PHY.

Unmasking all PHY interrupts in single write to prevent a race in the
interrupts order.

LASI indication fixes to work with peculiarities of PHYs.

Disable MAC RX to avoid a HW bug when closing the MAC under traffic.

Disable parallel detection on HiGig due to HW limitation.

Updating the shared memory structure to work with the current
bootcode.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 11:51:50 -08:00

199 lines
6.2 KiB
C

/* bnx2x_fw_defs.h: Broadcom Everest network driver.
*
* Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*/
#define CSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
(0x1922 + (port * 0x40) + (index * 0x4))
#define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
(0x1900 + (port * 0x40))
#define CSTORM_HC_BTR_OFFSET(port)\
(0x1984 + (port * 0xc0))
#define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index)\
(0x141a + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
#define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index)\
(0x1418 + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
#define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id)\
(0x1400 + (port * 0x280) + (cpu_id * 0x28))
#define CSTORM_STATS_FLAGS_OFFSET(port) (0x5108 + (port * 0x8))
#define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id)\
(0x1510 + (port * 0x240) + (client_id * 0x20))
#define TSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
(0x138a + (port * 0x28) + (index * 0x4))
#define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
(0x1370 + (port * 0x28))
#define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(port)\
(0x4b70 + (port * 0x8))
#define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function)\
(0x1418 + (function * 0x30))
#define TSTORM_HC_BTR_OFFSET(port)\
(0x13c4 + (port * 0x18))
#define TSTORM_INDIRECTION_TABLE_OFFSET(port)\
(0x22c8 + (port * 0x80))
#define TSTORM_INDIRECTION_TABLE_SIZE 0x80
#define TSTORM_MAC_FILTER_CONFIG_OFFSET(port)\
(0x1420 + (port * 0x30))
#define TSTORM_RCQ_PROD_OFFSET(port, client_id)\
(0x1508 + (port * 0x240) + (client_id * 0x20))
#define TSTORM_STATS_FLAGS_OFFSET(port) (0x4b90 + (port * 0x8))
#define USTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
(0x191a + (port * 0x28) + (index * 0x4))
#define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
(0x1900 + (port * 0x28))
#define USTORM_HC_BTR_OFFSET(port)\
(0x1954 + (port * 0xb8))
#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(port)\
(0x5408 + (port * 0x8))
#define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index)\
(0x141a + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
#define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index)\
(0x1418 + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
#define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id)\
(0x1400 + (port * 0x280) + (cpu_id * 0x28))
#define XSTORM_ASSERT_LIST_INDEX_OFFSET 0x1000
#define XSTORM_ASSERT_LIST_OFFSET(idx) (0x1020 + (idx * 0x10))
#define XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
(0x141a + (port * 0x28) + (index * 0x4))
#define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
(0x1400 + (port * 0x28))
#define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(port)\
(0x5408 + (port * 0x8))
#define XSTORM_HC_BTR_OFFSET(port)\
(0x1454 + (port * 0x18))
#define XSTORM_SPQ_PAGE_BASE_OFFSET(port)\
(0x5328 + (port * 0x18))
#define XSTORM_SPQ_PROD_OFFSET(port)\
(0x5330 + (port * 0x18))
#define XSTORM_STATS_FLAGS_OFFSET(port) (0x53f8 + (port * 0x8))
#define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
/**
* This file defines HSI constatnts for the ETH flow
*/
/* hash types */
#define DEFAULT_HASH_TYPE 0
#define IPV4_HASH_TYPE 1
#define TCP_IPV4_HASH_TYPE 2
#define IPV6_HASH_TYPE 3
#define TCP_IPV6_HASH_TYPE 4
/* values of command IDs in the ramrod message */
#define RAMROD_CMD_ID_ETH_PORT_SETUP (80)
#define RAMROD_CMD_ID_ETH_CLIENT_SETUP (85)
#define RAMROD_CMD_ID_ETH_STAT_QUERY (90)
#define RAMROD_CMD_ID_ETH_UPDATE (100)
#define RAMROD_CMD_ID_ETH_HALT (105)
#define RAMROD_CMD_ID_ETH_SET_MAC (110)
#define RAMROD_CMD_ID_ETH_CFC_DEL (115)
#define RAMROD_CMD_ID_ETH_PORT_DEL (120)
#define RAMROD_CMD_ID_ETH_FORWARD_SETUP (125)
/* command values for set mac command */
#define T_ETH_MAC_COMMAND_SET 0
#define T_ETH_MAC_COMMAND_INVALIDATE 1
#define T_ETH_INDIRECTION_TABLE_SIZE 128
/* Maximal L2 clients supported */
#define ETH_MAX_RX_CLIENTS (18)
/**
* This file defines HSI constatnts common to all microcode flows
*/
/* Connection types */
#define ETH_CONNECTION_TYPE 0
#define PROTOCOL_STATE_BIT_OFFSET 6
#define ETH_STATE (ETH_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
/* microcode fixed page page size 4K (chains and ring segments) */
#define MC_PAGE_SIZE (4096)
/* Host coalescing constants */
/* IGU constants */
#define IGU_PORT_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000
#define IGU_ADDR_INT_ACK 0x0200
#define IGU_ADDR_PROD_UPD 0x0201
#define IGU_ADDR_ATTN_BITS_UPD 0x0202
#define IGU_ADDR_ATTN_BITS_SET 0x0203
#define IGU_ADDR_ATTN_BITS_CLR 0x0204
#define IGU_ADDR_COALESCE_NOW 0x0205
#define IGU_ADDR_SIMD_MASK 0x0206
#define IGU_ADDR_SIMD_NOMASK 0x0207
#define IGU_ADDR_MSI_CTL 0x0210
#define IGU_ADDR_MSI_ADDR_LO 0x0211
#define IGU_ADDR_MSI_ADDR_HI 0x0212
#define IGU_ADDR_MSI_DATA 0x0213
#define IGU_INT_ENABLE 0
#define IGU_INT_DISABLE 1
#define IGU_INT_NOP 2
#define IGU_INT_NOP2 3
/* index numbers */
#define HC_USTORM_DEF_SB_NUM_INDICES 4
#define HC_CSTORM_DEF_SB_NUM_INDICES 8
#define HC_XSTORM_DEF_SB_NUM_INDICES 4
#define HC_TSTORM_DEF_SB_NUM_INDICES 4
#define HC_USTORM_SB_NUM_INDICES 4
#define HC_CSTORM_SB_NUM_INDICES 4
/* index values - which counterto update */
#define HC_INDEX_U_ETH_RX_CQ_CONS 1
#define HC_INDEX_C_ETH_TX_CQ_CONS 1
#define HC_INDEX_DEF_X_SPQ_CONS 0
#define HC_INDEX_DEF_C_ETH_FW_TX_CQ_CONS 2
#define HC_INDEX_DEF_C_ETH_SLOW_PATH 3
/* used by the driver to get the SB offset */
#define USTORM_ID 0
#define CSTORM_ID 1
#define XSTORM_ID 2
#define TSTORM_ID 3
#define ATTENTION_ID 4
/* max number of slow path commands per port */
#define MAX_RAMRODS_PER_PORT (8)
/* values for RX ETH CQE type field */
#define RX_ETH_CQE_TYPE_ETH_FASTPATH (0)
#define RX_ETH_CQE_TYPE_ETH_RAMROD (1)
/* MAC address list size */
#define T_MAC_ADDRESS_LIST_SIZE (96)
#define XSTORM_IP_ID_ROLL_HALF 0x8000
#define XSTORM_IP_ID_ROLL_ALL 0
#define FW_LOG_LIST_SIZE (50)
#define NUM_OF_PROTOCOLS 4
#define MAX_COS_NUMBER 16
#define MAX_T_STAT_COUNTER_ID 18
#define T_FAIR 1
#define FAIR_MEM 2
#define RS_PERIODIC_TIMEOUT_IN_SDM_TICS 25
#define UNKNOWN_ADDRESS 0
#define UNICAST_ADDRESS 1
#define MULTICAST_ADDRESS 2
#define BROADCAST_ADDRESS 3