2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
linux-next/arch/arm/mach-msm/board-qsd8x50.c
Ivan T. Ivanov 5146d77143 usb: phy: msm: Move mach dependent code to platform data
This patch fix compilation error when driver is compiled
in multi-platform builds.

drivers/built-in.o: In function `msm_otg_link_clk_reset':
./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'

Use platform data supplied reset handlers and adjust error
messages reported when reset sequence fail.

This is an intermediate step before adding support for reset
framework and newer targets.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09 00:06:48 -08:00

249 lines
5.9 KiB
C

/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/err.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
#include <mach/clk.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "common.h"
static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156;
/* Leave smc91x resources empty here, as we'll fill them in
* at run-time: they vary from board to board, and the true
* configuration won't be known until boot.
*/
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static int __init msm_init_smc91x(void)
{
if (machine_is_qsd8x50_surf()) {
smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
smc91x_resources[1].start =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
smc91x_resources[1].end =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
platform_device_register(&smc91x_device);
}
return 0;
}
module_init(msm_init_smc91x);
static int hsusb_phy_init_seq[] = {
0x08, 0x31, /* Increase HS Driver Amplitude */
0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
-1
};
static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
{
int ret;
if (assert) {
ret = clk_reset(link_clk, CLK_RESET_ASSERT);
if (ret)
pr_err("usb hs_clk assert failed\n");
} else {
ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb hs_clk deassert failed\n");
}
return ret;
}
static int hsusb_phy_clk_reset(struct clk *phy_clk)
{
int ret;
ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
if (ret) {
pr_err("usb phy clk assert failed\n");
return ret;
}
usleep_range(10000, 12000);
ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb phy clk deassert failed\n");
return ret;
}
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
.link_clk_reset = hsusb_link_clk_reset,
.phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
&msm_clock_8x50,
&msm_device_gpio_8x50,
&msm_device_uart3,
&msm_device_smd,
&msm_device_otg,
&msm_device_hsusb,
&msm_device_hsusb_host,
};
static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
{51, "sdc1_dat_3"},
{52, "sdc1_dat_2"},
{53, "sdc1_dat_1"},
{54, "sdc1_dat_0"},
{55, "sdc1_cmd"},
{56, "sdc1_clk"}
};
static struct vreg *vreg_mmc;
static unsigned long vreg_sts;
static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
{
int rc = 0;
struct platform_device *pdev;
pdev = container_of(dv, struct platform_device, dev);
if (vdd == 0) {
if (!vreg_sts)
return 0;
clear_bit(pdev->id, &vreg_sts);
if (!vreg_sts) {
rc = vreg_disable(vreg_mmc);
if (rc)
pr_err("vreg_mmc disable failed for slot "
"%d: %d\n", pdev->id, rc);
}
return 0;
}
if (!vreg_sts) {
rc = vreg_set_level(vreg_mmc, 2900);
if (rc)
pr_err("vreg_mmc set level failed for slot %d: %d\n",
pdev->id, rc);
rc = vreg_enable(vreg_mmc);
if (rc)
pr_err("vreg_mmc enable failed for slot %d: %d\n",
pdev->id, rc);
}
set_bit(pdev->id, &vreg_sts);
return 0;
}
static struct msm_mmc_gpio_data sdc1_gpio = {
.gpio = sdc1_gpio_cfg,
.size = ARRAY_SIZE(sdc1_gpio_cfg),
};
static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.translate_vdd = msm_sdcc_setup_power,
.gpio_data = &sdc1_gpio,
};
static void __init qsd8x50_init_mmc(void)
{
vreg_mmc = vreg_get(NULL, "gp5");
if (IS_ERR(vreg_mmc)) {
pr_err("vreg get for vreg_mmc failed (%ld)\n",
PTR_ERR(vreg_mmc));
return;
}
msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
}
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
}
static void __init qsd8x50_init_irq(void)
{
msm_init_irq();
msm_init_sirc();
}
static void __init qsd8x50_init(void)
{
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
qsd8x50_init_mmc();
}
static void __init qsd8x50_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END