mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
de78657e16
When larbdev is NULL (in the case I hit, the node is incorrectly set
iommus = <&iommu NUM>), it will cause device_link_add() fail and
kernel crashes when we try to print dev_name(larbdev).
Let's fail the probe if a larbdev is NULL to avoid invalid inputs from
dts.
It should work for normal correct setting and avoid the crash caused
by my incorrect setting.
Error log:
[ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
...
[ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO)
[ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
[ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu]
[ 18.346884][ T301] sp : ffffffc00a5635e0
[ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8
[ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38
[ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38
[ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38
[ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000
[ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0
[ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004
[ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420
[ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003
[ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2
[ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00
[ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000
[ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001
[ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005
[ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000
[ 18.360208][ T301] Hardware name: MT6873 (DT)
[ 18.360771][ T301] Call trace:
[ 18.361168][ T301] dump_backtrace+0xf8/0x1f0
[ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c
[ 18.362305][ T301] dump_stack+0x1c/0x2c
[ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump]
[ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump]
[ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8
[ 18.364937][ T301] die+0x16c/0x568
[ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214
[ 18.365402][ T301] do_page_fault+0xb8/0x678
[ 18.366934][ T301] do_translation_fault+0x48/0x64
[ 18.368645][ T301] do_mem_abort+0x68/0x148
[ 18.368652][ T301] el1_abort+0x40/0x64
[ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88
[ 18.368668][ T301] el1h_64_sync+0x68/0x6c
[ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
...
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 635319a4a7
("media: iommu/mediatek: Add device_link between the consumer and the larb devices")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220505132731.21628-1-miles.chen@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
1548 lines
46 KiB
C
1548 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2015-2016 MediaTek Inc.
|
|
* Author: Yong Wu <yong.wu@mediatek.com>
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-direct.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iommu.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/io-pgtable.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/soc/mediatek/infracfg.h>
|
|
#include <asm/barrier.h>
|
|
#include <soc/mediatek/smi.h>
|
|
|
|
#include <dt-bindings/memory/mtk-memory-port.h>
|
|
|
|
#define REG_MMU_PT_BASE_ADDR 0x000
|
|
#define MMU_PT_ADDR_MASK GENMASK(31, 7)
|
|
|
|
#define REG_MMU_INVALIDATE 0x020
|
|
#define F_ALL_INVLD 0x2
|
|
#define F_MMU_INV_RANGE 0x1
|
|
|
|
#define REG_MMU_INVLD_START_A 0x024
|
|
#define REG_MMU_INVLD_END_A 0x028
|
|
|
|
#define REG_MMU_INV_SEL_GEN2 0x02c
|
|
#define REG_MMU_INV_SEL_GEN1 0x038
|
|
#define F_INVLD_EN0 BIT(0)
|
|
#define F_INVLD_EN1 BIT(1)
|
|
|
|
#define REG_MMU_MISC_CTRL 0x048
|
|
#define F_MMU_IN_ORDER_WR_EN_MASK (BIT(1) | BIT(17))
|
|
#define F_MMU_STANDARD_AXI_MODE_MASK (BIT(3) | BIT(19))
|
|
|
|
#define REG_MMU_DCM_DIS 0x050
|
|
#define F_MMU_DCM BIT(8)
|
|
|
|
#define REG_MMU_WR_LEN_CTRL 0x054
|
|
#define F_MMU_WR_THROT_DIS_MASK (BIT(5) | BIT(21))
|
|
|
|
#define REG_MMU_CTRL_REG 0x110
|
|
#define F_MMU_TF_PROT_TO_PROGRAM_ADDR (2 << 4)
|
|
#define F_MMU_PREFETCH_RT_REPLACE_MOD BIT(4)
|
|
#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173 (2 << 5)
|
|
|
|
#define REG_MMU_IVRP_PADDR 0x114
|
|
|
|
#define REG_MMU_VLD_PA_RNG 0x118
|
|
#define F_MMU_VLD_PA_RNG(EA, SA) (((EA) << 8) | (SA))
|
|
|
|
#define REG_MMU_INT_CONTROL0 0x120
|
|
#define F_L2_MULIT_HIT_EN BIT(0)
|
|
#define F_TABLE_WALK_FAULT_INT_EN BIT(1)
|
|
#define F_PREETCH_FIFO_OVERFLOW_INT_EN BIT(2)
|
|
#define F_MISS_FIFO_OVERFLOW_INT_EN BIT(3)
|
|
#define F_PREFETCH_FIFO_ERR_INT_EN BIT(5)
|
|
#define F_MISS_FIFO_ERR_INT_EN BIT(6)
|
|
#define F_INT_CLR_BIT BIT(12)
|
|
|
|
#define REG_MMU_INT_MAIN_CONTROL 0x124
|
|
/* mmu0 | mmu1 */
|
|
#define F_INT_TRANSLATION_FAULT (BIT(0) | BIT(7))
|
|
#define F_INT_MAIN_MULTI_HIT_FAULT (BIT(1) | BIT(8))
|
|
#define F_INT_INVALID_PA_FAULT (BIT(2) | BIT(9))
|
|
#define F_INT_ENTRY_REPLACEMENT_FAULT (BIT(3) | BIT(10))
|
|
#define F_INT_TLB_MISS_FAULT (BIT(4) | BIT(11))
|
|
#define F_INT_MISS_TRANSACTION_FIFO_FAULT (BIT(5) | BIT(12))
|
|
#define F_INT_PRETETCH_TRANSATION_FIFO_FAULT (BIT(6) | BIT(13))
|
|
|
|
#define REG_MMU_CPE_DONE 0x12C
|
|
|
|
#define REG_MMU_FAULT_ST1 0x134
|
|
#define F_REG_MMU0_FAULT_MASK GENMASK(6, 0)
|
|
#define F_REG_MMU1_FAULT_MASK GENMASK(13, 7)
|
|
|
|
#define REG_MMU0_FAULT_VA 0x13c
|
|
#define F_MMU_INVAL_VA_31_12_MASK GENMASK(31, 12)
|
|
#define F_MMU_INVAL_VA_34_32_MASK GENMASK(11, 9)
|
|
#define F_MMU_INVAL_PA_34_32_MASK GENMASK(8, 6)
|
|
#define F_MMU_FAULT_VA_WRITE_BIT BIT(1)
|
|
#define F_MMU_FAULT_VA_LAYER_BIT BIT(0)
|
|
|
|
#define REG_MMU0_INVLD_PA 0x140
|
|
#define REG_MMU1_FAULT_VA 0x144
|
|
#define REG_MMU1_INVLD_PA 0x148
|
|
#define REG_MMU0_INT_ID 0x150
|
|
#define REG_MMU1_INT_ID 0x154
|
|
#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7)
|
|
#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
|
|
#define F_MMU_INT_ID_COMM_ID_EXT(a) (((a) >> 10) & 0x7)
|
|
#define F_MMU_INT_ID_SUB_COMM_ID_EXT(a) (((a) >> 7) & 0x7)
|
|
#define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
|
|
#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
|
|
|
|
#define MTK_PROTECT_PA_ALIGN 256
|
|
#define MTK_IOMMU_BANK_SZ 0x1000
|
|
|
|
#define PERICFG_IOMMU_1 0x714
|
|
|
|
#define HAS_4GB_MODE BIT(0)
|
|
/* HW will use the EMI clock if there isn't the "bclk". */
|
|
#define HAS_BCLK BIT(1)
|
|
#define HAS_VLD_PA_RNG BIT(2)
|
|
#define RESET_AXI BIT(3)
|
|
#define OUT_ORDER_WR_EN BIT(4)
|
|
#define HAS_SUB_COMM_2BITS BIT(5)
|
|
#define HAS_SUB_COMM_3BITS BIT(6)
|
|
#define WR_THROT_EN BIT(7)
|
|
#define HAS_LEGACY_IVRP_PADDR BIT(8)
|
|
#define IOVA_34_EN BIT(9)
|
|
#define SHARE_PGTABLE BIT(10) /* 2 HW share pgtable */
|
|
#define DCM_DISABLE BIT(11)
|
|
#define STD_AXI_MODE BIT(12) /* For non MM iommu */
|
|
/* 2 bits: iommu type */
|
|
#define MTK_IOMMU_TYPE_MM (0x0 << 13)
|
|
#define MTK_IOMMU_TYPE_INFRA (0x1 << 13)
|
|
#define MTK_IOMMU_TYPE_MASK (0x3 << 13)
|
|
/* PM and clock always on. e.g. infra iommu */
|
|
#define PM_CLK_AO BIT(15)
|
|
#define IFA_IOMMU_PCIE_SUPPORT BIT(16)
|
|
|
|
#define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask) \
|
|
((((pdata)->flags) & (mask)) == (_x))
|
|
|
|
#define MTK_IOMMU_HAS_FLAG(pdata, _x) MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, _x)
|
|
#define MTK_IOMMU_IS_TYPE(pdata, _x) MTK_IOMMU_HAS_FLAG_MASK(pdata, _x,\
|
|
MTK_IOMMU_TYPE_MASK)
|
|
|
|
#define MTK_INVALID_LARBID MTK_LARB_NR_MAX
|
|
|
|
#define MTK_LARB_COM_MAX 8
|
|
#define MTK_LARB_SUBCOM_MAX 8
|
|
|
|
#define MTK_IOMMU_GROUP_MAX 8
|
|
#define MTK_IOMMU_BANK_MAX 5
|
|
|
|
enum mtk_iommu_plat {
|
|
M4U_MT2712,
|
|
M4U_MT6779,
|
|
M4U_MT8167,
|
|
M4U_MT8173,
|
|
M4U_MT8183,
|
|
M4U_MT8186,
|
|
M4U_MT8192,
|
|
M4U_MT8195,
|
|
};
|
|
|
|
struct mtk_iommu_iova_region {
|
|
dma_addr_t iova_base;
|
|
unsigned long long size;
|
|
};
|
|
|
|
struct mtk_iommu_suspend_reg {
|
|
u32 misc_ctrl;
|
|
u32 dcm_dis;
|
|
u32 ctrl_reg;
|
|
u32 vld_pa_rng;
|
|
u32 wr_len_ctrl;
|
|
|
|
u32 int_control[MTK_IOMMU_BANK_MAX];
|
|
u32 int_main_control[MTK_IOMMU_BANK_MAX];
|
|
u32 ivrp_paddr[MTK_IOMMU_BANK_MAX];
|
|
};
|
|
|
|
struct mtk_iommu_plat_data {
|
|
enum mtk_iommu_plat m4u_plat;
|
|
u32 flags;
|
|
u32 inv_sel_reg;
|
|
|
|
char *pericfg_comp_str;
|
|
struct list_head *hw_list;
|
|
unsigned int iova_region_nr;
|
|
const struct mtk_iommu_iova_region *iova_region;
|
|
|
|
u8 banks_num;
|
|
bool banks_enable[MTK_IOMMU_BANK_MAX];
|
|
unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
|
|
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
|
|
};
|
|
|
|
struct mtk_iommu_bank_data {
|
|
void __iomem *base;
|
|
int irq;
|
|
u8 id;
|
|
struct device *parent_dev;
|
|
struct mtk_iommu_data *parent_data;
|
|
spinlock_t tlb_lock; /* lock for tlb range flush */
|
|
struct mtk_iommu_domain *m4u_dom; /* Each bank has a domain */
|
|
};
|
|
|
|
struct mtk_iommu_data {
|
|
struct device *dev;
|
|
struct clk *bclk;
|
|
phys_addr_t protect_base; /* protect memory base */
|
|
struct mtk_iommu_suspend_reg reg;
|
|
struct iommu_group *m4u_group[MTK_IOMMU_GROUP_MAX];
|
|
bool enable_4GB;
|
|
|
|
struct iommu_device iommu;
|
|
const struct mtk_iommu_plat_data *plat_data;
|
|
struct device *smicomm_dev;
|
|
|
|
struct mtk_iommu_bank_data *bank;
|
|
|
|
struct dma_iommu_mapping *mapping; /* For mtk_iommu_v1.c */
|
|
struct regmap *pericfg;
|
|
|
|
struct mutex mutex; /* Protect m4u_group/m4u_dom above */
|
|
|
|
/*
|
|
* In the sharing pgtable case, list data->list to the global list like m4ulist.
|
|
* In the non-sharing pgtable case, list data->list to the itself hw_list_head.
|
|
*/
|
|
struct list_head *hw_list;
|
|
struct list_head hw_list_head;
|
|
struct list_head list;
|
|
struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX];
|
|
};
|
|
|
|
struct mtk_iommu_domain {
|
|
struct io_pgtable_cfg cfg;
|
|
struct io_pgtable_ops *iop;
|
|
|
|
struct mtk_iommu_bank_data *bank;
|
|
struct iommu_domain domain;
|
|
|
|
struct mutex mutex; /* Protect "data" in this structure */
|
|
};
|
|
|
|
static int mtk_iommu_bind(struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_get_drvdata(dev);
|
|
|
|
return component_bind_all(dev, &data->larb_imu);
|
|
}
|
|
|
|
static void mtk_iommu_unbind(struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_get_drvdata(dev);
|
|
|
|
component_unbind_all(dev, &data->larb_imu);
|
|
}
|
|
|
|
static const struct iommu_ops mtk_iommu_ops;
|
|
|
|
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid);
|
|
|
|
#define MTK_IOMMU_TLB_ADDR(iova) ({ \
|
|
dma_addr_t _addr = iova; \
|
|
((lower_32_bits(_addr) & GENMASK(31, 12)) | upper_32_bits(_addr));\
|
|
})
|
|
|
|
/*
|
|
* In M4U 4GB mode, the physical address is remapped as below:
|
|
*
|
|
* CPU Physical address:
|
|
* ====================
|
|
*
|
|
* 0 1G 2G 3G 4G 5G
|
|
* |---A---|---B---|---C---|---D---|---E---|
|
|
* +--I/O--+------------Memory-------------+
|
|
*
|
|
* IOMMU output physical address:
|
|
* =============================
|
|
*
|
|
* 4G 5G 6G 7G 8G
|
|
* |---E---|---B---|---C---|---D---|
|
|
* +------------Memory-------------+
|
|
*
|
|
* The Region 'A'(I/O) can NOT be mapped by M4U; For Region 'B'/'C'/'D', the
|
|
* bit32 of the CPU physical address always is needed to set, and for Region
|
|
* 'E', the CPU physical address keep as is.
|
|
* Additionally, The iommu consumers always use the CPU phyiscal address.
|
|
*/
|
|
#define MTK_IOMMU_4GB_MODE_REMAP_BASE 0x140000000UL
|
|
|
|
static LIST_HEAD(m4ulist); /* List all the M4U HWs */
|
|
|
|
#define for_each_m4u(data, head) list_for_each_entry(data, head, list)
|
|
|
|
static const struct mtk_iommu_iova_region single_domain[] = {
|
|
{.iova_base = 0, .size = SZ_4G},
|
|
};
|
|
|
|
static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
|
|
{ .iova_base = 0x0, .size = SZ_4G}, /* 0 ~ 4G */
|
|
#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
|
|
{ .iova_base = SZ_4G, .size = SZ_4G}, /* 4G ~ 8G */
|
|
{ .iova_base = SZ_4G * 2, .size = SZ_4G}, /* 8G ~ 12G */
|
|
{ .iova_base = SZ_4G * 3, .size = SZ_4G}, /* 12G ~ 16G */
|
|
|
|
{ .iova_base = 0x240000000ULL, .size = 0x4000000}, /* CCU0 */
|
|
{ .iova_base = 0x244000000ULL, .size = 0x4000000}, /* CCU1 */
|
|
#endif
|
|
};
|
|
|
|
/* If 2 M4U share a domain(use the same hwlist), Put the corresponding info in first data.*/
|
|
static struct mtk_iommu_data *mtk_iommu_get_frst_data(struct list_head *hwlist)
|
|
{
|
|
return list_first_entry(hwlist, struct mtk_iommu_data, list);
|
|
}
|
|
|
|
static struct mtk_iommu_domain *to_mtk_domain(struct iommu_domain *dom)
|
|
{
|
|
return container_of(dom, struct mtk_iommu_domain, domain);
|
|
}
|
|
|
|
static void mtk_iommu_tlb_flush_all(struct mtk_iommu_data *data)
|
|
{
|
|
/* Tlb flush all always is in bank0. */
|
|
struct mtk_iommu_bank_data *bank = &data->bank[0];
|
|
void __iomem *base = bank->base;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->tlb_lock, flags);
|
|
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0, base + data->plat_data->inv_sel_reg);
|
|
writel_relaxed(F_ALL_INVLD, base + REG_MMU_INVALIDATE);
|
|
wmb(); /* Make sure the tlb flush all done */
|
|
spin_unlock_irqrestore(&bank->tlb_lock, flags);
|
|
}
|
|
|
|
static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
|
|
struct mtk_iommu_bank_data *bank)
|
|
{
|
|
struct list_head *head = bank->parent_data->hw_list;
|
|
struct mtk_iommu_bank_data *curbank;
|
|
struct mtk_iommu_data *data;
|
|
bool check_pm_status;
|
|
unsigned long flags;
|
|
void __iomem *base;
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
for_each_m4u(data, head) {
|
|
/*
|
|
* To avoid resume the iommu device frequently when the iommu device
|
|
* is not active, it doesn't always call pm_runtime_get here, then tlb
|
|
* flush depends on the tlb flush all in the runtime resume.
|
|
*
|
|
* There are 2 special cases:
|
|
*
|
|
* Case1: The iommu dev doesn't have power domain but has bclk. This case
|
|
* should also avoid the tlb flush while the dev is not active to mute
|
|
* the tlb timeout log. like mt8173.
|
|
*
|
|
* Case2: The power/clock of infra iommu is always on, and it doesn't
|
|
* have the device link with the master devices. This case should avoid
|
|
* the PM status check.
|
|
*/
|
|
check_pm_status = !MTK_IOMMU_HAS_FLAG(data->plat_data, PM_CLK_AO);
|
|
|
|
if (check_pm_status) {
|
|
if (pm_runtime_get_if_in_use(data->dev) <= 0)
|
|
continue;
|
|
}
|
|
|
|
curbank = &data->bank[bank->id];
|
|
base = curbank->base;
|
|
|
|
spin_lock_irqsave(&curbank->tlb_lock, flags);
|
|
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
|
|
base + data->plat_data->inv_sel_reg);
|
|
|
|
writel_relaxed(MTK_IOMMU_TLB_ADDR(iova), base + REG_MMU_INVLD_START_A);
|
|
writel_relaxed(MTK_IOMMU_TLB_ADDR(iova + size - 1),
|
|
base + REG_MMU_INVLD_END_A);
|
|
writel_relaxed(F_MMU_INV_RANGE, base + REG_MMU_INVALIDATE);
|
|
|
|
/* tlb sync */
|
|
ret = readl_poll_timeout_atomic(base + REG_MMU_CPE_DONE,
|
|
tmp, tmp != 0, 10, 1000);
|
|
|
|
/* Clear the CPE status */
|
|
writel_relaxed(0, base + REG_MMU_CPE_DONE);
|
|
spin_unlock_irqrestore(&curbank->tlb_lock, flags);
|
|
|
|
if (ret) {
|
|
dev_warn(data->dev,
|
|
"Partial TLB flush timed out, falling back to full flush\n");
|
|
mtk_iommu_tlb_flush_all(data);
|
|
}
|
|
|
|
if (check_pm_status)
|
|
pm_runtime_put(data->dev);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
|
|
{
|
|
struct mtk_iommu_bank_data *bank = dev_id;
|
|
struct mtk_iommu_data *data = bank->parent_data;
|
|
struct mtk_iommu_domain *dom = bank->m4u_dom;
|
|
unsigned int fault_larb = MTK_INVALID_LARBID, fault_port = 0, sub_comm = 0;
|
|
u32 int_state, regval, va34_32, pa34_32;
|
|
const struct mtk_iommu_plat_data *plat_data = data->plat_data;
|
|
void __iomem *base = bank->base;
|
|
u64 fault_iova, fault_pa;
|
|
bool layer, write;
|
|
|
|
/* Read error info from registers */
|
|
int_state = readl_relaxed(base + REG_MMU_FAULT_ST1);
|
|
if (int_state & F_REG_MMU0_FAULT_MASK) {
|
|
regval = readl_relaxed(base + REG_MMU0_INT_ID);
|
|
fault_iova = readl_relaxed(base + REG_MMU0_FAULT_VA);
|
|
fault_pa = readl_relaxed(base + REG_MMU0_INVLD_PA);
|
|
} else {
|
|
regval = readl_relaxed(base + REG_MMU1_INT_ID);
|
|
fault_iova = readl_relaxed(base + REG_MMU1_FAULT_VA);
|
|
fault_pa = readl_relaxed(base + REG_MMU1_INVLD_PA);
|
|
}
|
|
layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
|
|
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
|
|
if (MTK_IOMMU_HAS_FLAG(plat_data, IOVA_34_EN)) {
|
|
va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
|
|
fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
|
|
fault_iova |= (u64)va34_32 << 32;
|
|
}
|
|
pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
|
|
fault_pa |= (u64)pa34_32 << 32;
|
|
|
|
if (MTK_IOMMU_IS_TYPE(plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
fault_port = F_MMU_INT_ID_PORT_ID(regval);
|
|
if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_2BITS)) {
|
|
fault_larb = F_MMU_INT_ID_COMM_ID(regval);
|
|
sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
|
|
} else if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_3BITS)) {
|
|
fault_larb = F_MMU_INT_ID_COMM_ID_EXT(regval);
|
|
sub_comm = F_MMU_INT_ID_SUB_COMM_ID_EXT(regval);
|
|
} else {
|
|
fault_larb = F_MMU_INT_ID_LARB_ID(regval);
|
|
}
|
|
fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
|
|
}
|
|
|
|
if (report_iommu_fault(&dom->domain, bank->parent_dev, fault_iova,
|
|
write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
|
|
dev_err_ratelimited(
|
|
bank->parent_dev,
|
|
"fault type=0x%x iova=0x%llx pa=0x%llx master=0x%x(larb=%d port=%d) layer=%d %s\n",
|
|
int_state, fault_iova, fault_pa, regval, fault_larb, fault_port,
|
|
layer, write ? "write" : "read");
|
|
}
|
|
|
|
/* Interrupt clear */
|
|
regval = readl_relaxed(base + REG_MMU_INT_CONTROL0);
|
|
regval |= F_INT_CLR_BIT;
|
|
writel_relaxed(regval, base + REG_MMU_INT_CONTROL0);
|
|
|
|
mtk_iommu_tlb_flush_all(data);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int mtk_iommu_get_bank_id(struct device *dev,
|
|
const struct mtk_iommu_plat_data *plat_data)
|
|
{
|
|
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
|
|
unsigned int i, portmsk = 0, bankid = 0;
|
|
|
|
if (plat_data->banks_num == 1)
|
|
return bankid;
|
|
|
|
for (i = 0; i < fwspec->num_ids; i++)
|
|
portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
|
|
|
|
for (i = 0; i < plat_data->banks_num && i < MTK_IOMMU_BANK_MAX; i++) {
|
|
if (!plat_data->banks_enable[i])
|
|
continue;
|
|
|
|
if (portmsk & plat_data->banks_portmsk[i]) {
|
|
bankid = i;
|
|
break;
|
|
}
|
|
}
|
|
return bankid; /* default is 0 */
|
|
}
|
|
|
|
static int mtk_iommu_get_iova_region_id(struct device *dev,
|
|
const struct mtk_iommu_plat_data *plat_data)
|
|
{
|
|
const struct mtk_iommu_iova_region *rgn = plat_data->iova_region;
|
|
const struct bus_dma_region *dma_rgn = dev->dma_range_map;
|
|
int i, candidate = -1;
|
|
dma_addr_t dma_end;
|
|
|
|
if (!dma_rgn || plat_data->iova_region_nr == 1)
|
|
return 0;
|
|
|
|
dma_end = dma_rgn->dma_start + dma_rgn->size - 1;
|
|
for (i = 0; i < plat_data->iova_region_nr; i++, rgn++) {
|
|
/* Best fit. */
|
|
if (dma_rgn->dma_start == rgn->iova_base &&
|
|
dma_end == rgn->iova_base + rgn->size - 1)
|
|
return i;
|
|
/* ok if it is inside this region. */
|
|
if (dma_rgn->dma_start >= rgn->iova_base &&
|
|
dma_end < rgn->iova_base + rgn->size)
|
|
candidate = i;
|
|
}
|
|
|
|
if (candidate >= 0)
|
|
return candidate;
|
|
dev_err(dev, "Can NOT find the iommu domain id(%pad 0x%llx).\n",
|
|
&dma_rgn->dma_start, dma_rgn->size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
|
|
bool enable, unsigned int regionid)
|
|
{
|
|
struct mtk_smi_larb_iommu *larb_mmu;
|
|
unsigned int larbid, portid;
|
|
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
|
|
const struct mtk_iommu_iova_region *region;
|
|
u32 peri_mmuen, peri_mmuen_msk;
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < fwspec->num_ids; ++i) {
|
|
larbid = MTK_M4U_TO_LARB(fwspec->ids[i]);
|
|
portid = MTK_M4U_TO_PORT(fwspec->ids[i]);
|
|
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
larb_mmu = &data->larb_imu[larbid];
|
|
|
|
region = data->plat_data->iova_region + regionid;
|
|
larb_mmu->bank[portid] = upper_32_bits(region->iova_base);
|
|
|
|
dev_dbg(dev, "%s iommu for larb(%s) port %d region %d rgn-bank %d.\n",
|
|
enable ? "enable" : "disable", dev_name(larb_mmu->dev),
|
|
portid, regionid, larb_mmu->bank[portid]);
|
|
|
|
if (enable)
|
|
larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
|
|
else
|
|
larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
|
|
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA)) {
|
|
peri_mmuen_msk = BIT(portid);
|
|
/* PCI dev has only one output id, enable the next writing bit for PCIe */
|
|
if (dev_is_pci(dev))
|
|
peri_mmuen_msk |= BIT(portid + 1);
|
|
|
|
peri_mmuen = enable ? peri_mmuen_msk : 0;
|
|
ret = regmap_update_bits(data->pericfg, PERICFG_IOMMU_1,
|
|
peri_mmuen_msk, peri_mmuen);
|
|
if (ret)
|
|
dev_err(dev, "%s iommu(%s) inframaster 0x%x fail(%d).\n",
|
|
enable ? "enable" : "disable",
|
|
dev_name(data->dev), peri_mmuen_msk, ret);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
|
|
struct mtk_iommu_data *data,
|
|
unsigned int region_id)
|
|
{
|
|
const struct mtk_iommu_iova_region *region;
|
|
struct mtk_iommu_domain *m4u_dom;
|
|
|
|
/* Always use bank0 in sharing pgtable case */
|
|
m4u_dom = data->bank[0].m4u_dom;
|
|
if (m4u_dom) {
|
|
dom->iop = m4u_dom->iop;
|
|
dom->cfg = m4u_dom->cfg;
|
|
dom->domain.pgsize_bitmap = m4u_dom->cfg.pgsize_bitmap;
|
|
goto update_iova_region;
|
|
}
|
|
|
|
dom->cfg = (struct io_pgtable_cfg) {
|
|
.quirks = IO_PGTABLE_QUIRK_ARM_NS |
|
|
IO_PGTABLE_QUIRK_NO_PERMS |
|
|
IO_PGTABLE_QUIRK_ARM_MTK_EXT,
|
|
.pgsize_bitmap = mtk_iommu_ops.pgsize_bitmap,
|
|
.ias = MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN) ? 34 : 32,
|
|
.iommu_dev = data->dev,
|
|
};
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
|
|
dom->cfg.oas = data->enable_4GB ? 33 : 32;
|
|
else
|
|
dom->cfg.oas = 35;
|
|
|
|
dom->iop = alloc_io_pgtable_ops(ARM_V7S, &dom->cfg, data);
|
|
if (!dom->iop) {
|
|
dev_err(data->dev, "Failed to alloc io pgtable\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Update our support page sizes bitmap */
|
|
dom->domain.pgsize_bitmap = dom->cfg.pgsize_bitmap;
|
|
|
|
update_iova_region:
|
|
/* Update the iova region for this domain */
|
|
region = data->plat_data->iova_region + region_id;
|
|
dom->domain.geometry.aperture_start = region->iova_base;
|
|
dom->domain.geometry.aperture_end = region->iova_base + region->size - 1;
|
|
dom->domain.geometry.force_aperture = true;
|
|
return 0;
|
|
}
|
|
|
|
static struct iommu_domain *mtk_iommu_domain_alloc(unsigned type)
|
|
{
|
|
struct mtk_iommu_domain *dom;
|
|
|
|
if (type != IOMMU_DOMAIN_DMA && type != IOMMU_DOMAIN_UNMANAGED)
|
|
return NULL;
|
|
|
|
dom = kzalloc(sizeof(*dom), GFP_KERNEL);
|
|
if (!dom)
|
|
return NULL;
|
|
mutex_init(&dom->mutex);
|
|
|
|
return &dom->domain;
|
|
}
|
|
|
|
static void mtk_iommu_domain_free(struct iommu_domain *domain)
|
|
{
|
|
kfree(to_mtk_domain(domain));
|
|
}
|
|
|
|
static int mtk_iommu_attach_device(struct iommu_domain *domain,
|
|
struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_iommu_priv_get(dev), *frstdata;
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
struct list_head *hw_list = data->hw_list;
|
|
struct device *m4udev = data->dev;
|
|
struct mtk_iommu_bank_data *bank;
|
|
unsigned int bankid;
|
|
int ret, region_id;
|
|
|
|
region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
|
|
if (region_id < 0)
|
|
return region_id;
|
|
|
|
bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
|
|
mutex_lock(&dom->mutex);
|
|
if (!dom->bank) {
|
|
/* Data is in the frstdata in sharing pgtable case. */
|
|
frstdata = mtk_iommu_get_frst_data(hw_list);
|
|
|
|
ret = mtk_iommu_domain_finalise(dom, frstdata, region_id);
|
|
if (ret) {
|
|
mutex_unlock(&dom->mutex);
|
|
return -ENODEV;
|
|
}
|
|
dom->bank = &data->bank[bankid];
|
|
}
|
|
mutex_unlock(&dom->mutex);
|
|
|
|
mutex_lock(&data->mutex);
|
|
bank = &data->bank[bankid];
|
|
if (!bank->m4u_dom) { /* Initialize the M4U HW for each a BANK */
|
|
ret = pm_runtime_resume_and_get(m4udev);
|
|
if (ret < 0) {
|
|
dev_err(m4udev, "pm get fail(%d) in attach.\n", ret);
|
|
goto err_unlock;
|
|
}
|
|
|
|
ret = mtk_iommu_hw_init(data, bankid);
|
|
if (ret) {
|
|
pm_runtime_put(m4udev);
|
|
goto err_unlock;
|
|
}
|
|
bank->m4u_dom = dom;
|
|
writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
|
|
bank->base + REG_MMU_PT_BASE_ADDR);
|
|
|
|
pm_runtime_put(m4udev);
|
|
}
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return mtk_iommu_config(data, dev, true, region_id);
|
|
|
|
err_unlock:
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_iommu_detach_device(struct iommu_domain *domain,
|
|
struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
|
|
|
|
mtk_iommu_config(data, dev, false, 0);
|
|
}
|
|
|
|
static int mtk_iommu_map(struct iommu_domain *domain, unsigned long iova,
|
|
phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
|
|
/* The "4GB mode" M4U physically can not use the lower remap of Dram. */
|
|
if (dom->bank->parent_data->enable_4GB)
|
|
paddr |= BIT_ULL(32);
|
|
|
|
/* Synchronize with the tlb_lock */
|
|
return dom->iop->map(dom->iop, iova, paddr, size, prot, gfp);
|
|
}
|
|
|
|
static size_t mtk_iommu_unmap(struct iommu_domain *domain,
|
|
unsigned long iova, size_t size,
|
|
struct iommu_iotlb_gather *gather)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
|
|
iommu_iotlb_gather_add_range(gather, iova, size);
|
|
return dom->iop->unmap(dom->iop, iova, size, gather);
|
|
}
|
|
|
|
static void mtk_iommu_flush_iotlb_all(struct iommu_domain *domain)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
|
|
mtk_iommu_tlb_flush_all(dom->bank->parent_data);
|
|
}
|
|
|
|
static void mtk_iommu_iotlb_sync(struct iommu_domain *domain,
|
|
struct iommu_iotlb_gather *gather)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
size_t length = gather->end - gather->start + 1;
|
|
|
|
mtk_iommu_tlb_flush_range_sync(gather->start, length, dom->bank);
|
|
}
|
|
|
|
static void mtk_iommu_sync_map(struct iommu_domain *domain, unsigned long iova,
|
|
size_t size)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
|
|
mtk_iommu_tlb_flush_range_sync(iova, size, dom->bank);
|
|
}
|
|
|
|
static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
|
|
dma_addr_t iova)
|
|
{
|
|
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
|
|
phys_addr_t pa;
|
|
|
|
pa = dom->iop->iova_to_phys(dom->iop, iova);
|
|
if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT) &&
|
|
dom->bank->parent_data->enable_4GB &&
|
|
pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE)
|
|
pa &= ~BIT_ULL(32);
|
|
|
|
return pa;
|
|
}
|
|
|
|
static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
|
|
{
|
|
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
|
|
struct mtk_iommu_data *data;
|
|
struct device_link *link;
|
|
struct device *larbdev;
|
|
unsigned int larbid, larbidx, i;
|
|
|
|
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
|
|
return ERR_PTR(-ENODEV); /* Not a iommu client device */
|
|
|
|
data = dev_iommu_priv_get(dev);
|
|
|
|
if (!MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM))
|
|
return &data->iommu;
|
|
|
|
/*
|
|
* Link the consumer device with the smi-larb device(supplier).
|
|
* The device that connects with each a larb is a independent HW.
|
|
* All the ports in each a device should be in the same larbs.
|
|
*/
|
|
larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
|
|
if (larbid >= MTK_LARB_NR_MAX)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
for (i = 1; i < fwspec->num_ids; i++) {
|
|
larbidx = MTK_M4U_TO_LARB(fwspec->ids[i]);
|
|
if (larbid != larbidx) {
|
|
dev_err(dev, "Can only use one larb. Fail@larb%d-%d.\n",
|
|
larbid, larbidx);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
}
|
|
larbdev = data->larb_imu[larbid].dev;
|
|
if (!larbdev)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
link = device_link_add(dev, larbdev,
|
|
DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
|
|
if (!link)
|
|
dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
|
|
return &data->iommu;
|
|
}
|
|
|
|
static void mtk_iommu_release_device(struct device *dev)
|
|
{
|
|
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
|
|
struct mtk_iommu_data *data;
|
|
struct device *larbdev;
|
|
unsigned int larbid;
|
|
|
|
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
|
|
return;
|
|
|
|
data = dev_iommu_priv_get(dev);
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
|
|
larbdev = data->larb_imu[larbid].dev;
|
|
device_link_remove(dev, larbdev);
|
|
}
|
|
|
|
iommu_fwspec_free(dev);
|
|
}
|
|
|
|
static int mtk_iommu_get_group_id(struct device *dev, const struct mtk_iommu_plat_data *plat_data)
|
|
{
|
|
unsigned int bankid;
|
|
|
|
/*
|
|
* If the bank function is enabled, each bank is a iommu group/domain.
|
|
* Otherwise, each iova region is a iommu group/domain.
|
|
*/
|
|
bankid = mtk_iommu_get_bank_id(dev, plat_data);
|
|
if (bankid)
|
|
return bankid;
|
|
|
|
return mtk_iommu_get_iova_region_id(dev, plat_data);
|
|
}
|
|
|
|
static struct iommu_group *mtk_iommu_device_group(struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
|
|
struct list_head *hw_list = c_data->hw_list;
|
|
struct iommu_group *group;
|
|
int groupid;
|
|
|
|
data = mtk_iommu_get_frst_data(hw_list);
|
|
if (!data)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
groupid = mtk_iommu_get_group_id(dev, data->plat_data);
|
|
if (groupid < 0)
|
|
return ERR_PTR(groupid);
|
|
|
|
mutex_lock(&data->mutex);
|
|
group = data->m4u_group[groupid];
|
|
if (!group) {
|
|
group = iommu_group_alloc();
|
|
if (!IS_ERR(group))
|
|
data->m4u_group[groupid] = group;
|
|
} else {
|
|
iommu_group_ref_get(group);
|
|
}
|
|
mutex_unlock(&data->mutex);
|
|
return group;
|
|
}
|
|
|
|
static int mtk_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
|
|
{
|
|
struct platform_device *m4updev;
|
|
|
|
if (args->args_count != 1) {
|
|
dev_err(dev, "invalid #iommu-cells(%d) property for IOMMU\n",
|
|
args->args_count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!dev_iommu_priv_get(dev)) {
|
|
/* Get the m4u device */
|
|
m4updev = of_find_device_by_node(args->np);
|
|
if (WARN_ON(!m4updev))
|
|
return -EINVAL;
|
|
|
|
dev_iommu_priv_set(dev, platform_get_drvdata(m4updev));
|
|
}
|
|
|
|
return iommu_fwspec_add_ids(dev, args->args, 1);
|
|
}
|
|
|
|
static void mtk_iommu_get_resv_regions(struct device *dev,
|
|
struct list_head *head)
|
|
{
|
|
struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
|
|
unsigned int regionid = mtk_iommu_get_iova_region_id(dev, data->plat_data), i;
|
|
const struct mtk_iommu_iova_region *resv, *curdom;
|
|
struct iommu_resv_region *region;
|
|
int prot = IOMMU_WRITE | IOMMU_READ;
|
|
|
|
if ((int)regionid < 0)
|
|
return;
|
|
curdom = data->plat_data->iova_region + regionid;
|
|
for (i = 0; i < data->plat_data->iova_region_nr; i++) {
|
|
resv = data->plat_data->iova_region + i;
|
|
|
|
/* Only reserve when the region is inside the current domain */
|
|
if (resv->iova_base <= curdom->iova_base ||
|
|
resv->iova_base + resv->size >= curdom->iova_base + curdom->size)
|
|
continue;
|
|
|
|
region = iommu_alloc_resv_region(resv->iova_base, resv->size,
|
|
prot, IOMMU_RESV_RESERVED);
|
|
if (!region)
|
|
return;
|
|
|
|
list_add_tail(®ion->list, head);
|
|
}
|
|
}
|
|
|
|
static const struct iommu_ops mtk_iommu_ops = {
|
|
.domain_alloc = mtk_iommu_domain_alloc,
|
|
.probe_device = mtk_iommu_probe_device,
|
|
.release_device = mtk_iommu_release_device,
|
|
.device_group = mtk_iommu_device_group,
|
|
.of_xlate = mtk_iommu_of_xlate,
|
|
.get_resv_regions = mtk_iommu_get_resv_regions,
|
|
.put_resv_regions = generic_iommu_put_resv_regions,
|
|
.pgsize_bitmap = SZ_4K | SZ_64K | SZ_1M | SZ_16M,
|
|
.owner = THIS_MODULE,
|
|
.default_domain_ops = &(const struct iommu_domain_ops) {
|
|
.attach_dev = mtk_iommu_attach_device,
|
|
.detach_dev = mtk_iommu_detach_device,
|
|
.map = mtk_iommu_map,
|
|
.unmap = mtk_iommu_unmap,
|
|
.flush_iotlb_all = mtk_iommu_flush_iotlb_all,
|
|
.iotlb_sync = mtk_iommu_iotlb_sync,
|
|
.iotlb_sync_map = mtk_iommu_sync_map,
|
|
.iova_to_phys = mtk_iommu_iova_to_phys,
|
|
.free = mtk_iommu_domain_free,
|
|
}
|
|
};
|
|
|
|
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid)
|
|
{
|
|
const struct mtk_iommu_bank_data *bankx = &data->bank[bankid];
|
|
const struct mtk_iommu_bank_data *bank0 = &data->bank[0];
|
|
u32 regval;
|
|
|
|
/*
|
|
* Global control settings are in bank0. May re-init these global registers
|
|
* since no sure if there is bank0 consumers.
|
|
*/
|
|
if (data->plat_data->m4u_plat == M4U_MT8173) {
|
|
regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
|
|
F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
|
|
} else {
|
|
regval = readl_relaxed(bank0->base + REG_MMU_CTRL_REG);
|
|
regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
|
|
}
|
|
writel_relaxed(regval, bank0->base + REG_MMU_CTRL_REG);
|
|
|
|
if (data->enable_4GB &&
|
|
MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
|
|
/*
|
|
* If 4GB mode is enabled, the validate PA range is from
|
|
* 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
|
|
*/
|
|
regval = F_MMU_VLD_PA_RNG(7, 4);
|
|
writel_relaxed(regval, bank0->base + REG_MMU_VLD_PA_RNG);
|
|
}
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, DCM_DISABLE))
|
|
writel_relaxed(F_MMU_DCM, bank0->base + REG_MMU_DCM_DIS);
|
|
else
|
|
writel_relaxed(0, bank0->base + REG_MMU_DCM_DIS);
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, WR_THROT_EN)) {
|
|
/* write command throttling mode */
|
|
regval = readl_relaxed(bank0->base + REG_MMU_WR_LEN_CTRL);
|
|
regval &= ~F_MMU_WR_THROT_DIS_MASK;
|
|
writel_relaxed(regval, bank0->base + REG_MMU_WR_LEN_CTRL);
|
|
}
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
|
|
/* The register is called STANDARD_AXI_MODE in this case */
|
|
regval = 0;
|
|
} else {
|
|
regval = readl_relaxed(bank0->base + REG_MMU_MISC_CTRL);
|
|
if (!MTK_IOMMU_HAS_FLAG(data->plat_data, STD_AXI_MODE))
|
|
regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN))
|
|
regval &= ~F_MMU_IN_ORDER_WR_EN_MASK;
|
|
}
|
|
writel_relaxed(regval, bank0->base + REG_MMU_MISC_CTRL);
|
|
|
|
/* Independent settings for each bank */
|
|
regval = F_L2_MULIT_HIT_EN |
|
|
F_TABLE_WALK_FAULT_INT_EN |
|
|
F_PREETCH_FIFO_OVERFLOW_INT_EN |
|
|
F_MISS_FIFO_OVERFLOW_INT_EN |
|
|
F_PREFETCH_FIFO_ERR_INT_EN |
|
|
F_MISS_FIFO_ERR_INT_EN;
|
|
writel_relaxed(regval, bankx->base + REG_MMU_INT_CONTROL0);
|
|
|
|
regval = F_INT_TRANSLATION_FAULT |
|
|
F_INT_MAIN_MULTI_HIT_FAULT |
|
|
F_INT_INVALID_PA_FAULT |
|
|
F_INT_ENTRY_REPLACEMENT_FAULT |
|
|
F_INT_TLB_MISS_FAULT |
|
|
F_INT_MISS_TRANSACTION_FIFO_FAULT |
|
|
F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
|
|
writel_relaxed(regval, bankx->base + REG_MMU_INT_MAIN_CONTROL);
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
|
|
regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
|
|
else
|
|
regval = lower_32_bits(data->protect_base) |
|
|
upper_32_bits(data->protect_base);
|
|
writel_relaxed(regval, bankx->base + REG_MMU_IVRP_PADDR);
|
|
|
|
if (devm_request_irq(bankx->parent_dev, bankx->irq, mtk_iommu_isr, 0,
|
|
dev_name(bankx->parent_dev), (void *)bankx)) {
|
|
writel_relaxed(0, bankx->base + REG_MMU_PT_BASE_ADDR);
|
|
dev_err(bankx->parent_dev, "Failed @ IRQ-%d Request\n", bankx->irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct component_master_ops mtk_iommu_com_ops = {
|
|
.bind = mtk_iommu_bind,
|
|
.unbind = mtk_iommu_unbind,
|
|
};
|
|
|
|
static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **match,
|
|
struct mtk_iommu_data *data)
|
|
{
|
|
struct device_node *larbnode, *smicomm_node, *smi_subcomm_node;
|
|
struct platform_device *plarbdev;
|
|
struct device_link *link;
|
|
int i, larb_nr, ret;
|
|
|
|
larb_nr = of_count_phandle_with_args(dev->of_node, "mediatek,larbs", NULL);
|
|
if (larb_nr < 0)
|
|
return larb_nr;
|
|
|
|
for (i = 0; i < larb_nr; i++) {
|
|
u32 id;
|
|
|
|
larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i);
|
|
if (!larbnode)
|
|
return -EINVAL;
|
|
|
|
if (!of_device_is_available(larbnode)) {
|
|
of_node_put(larbnode);
|
|
continue;
|
|
}
|
|
|
|
ret = of_property_read_u32(larbnode, "mediatek,larb-id", &id);
|
|
if (ret)/* The id is consecutive if there is no this property */
|
|
id = i;
|
|
|
|
plarbdev = of_find_device_by_node(larbnode);
|
|
if (!plarbdev) {
|
|
of_node_put(larbnode);
|
|
return -ENODEV;
|
|
}
|
|
if (!plarbdev->dev.driver) {
|
|
of_node_put(larbnode);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
data->larb_imu[id].dev = &plarbdev->dev;
|
|
|
|
component_match_add_release(dev, match, component_release_of,
|
|
component_compare_of, larbnode);
|
|
}
|
|
|
|
/* Get smi-(sub)-common dev from the last larb. */
|
|
smi_subcomm_node = of_parse_phandle(larbnode, "mediatek,smi", 0);
|
|
if (!smi_subcomm_node)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* It may have two level smi-common. the node is smi-sub-common if it
|
|
* has a new mediatek,smi property. otherwise it is smi-commmon.
|
|
*/
|
|
smicomm_node = of_parse_phandle(smi_subcomm_node, "mediatek,smi", 0);
|
|
if (smicomm_node)
|
|
of_node_put(smi_subcomm_node);
|
|
else
|
|
smicomm_node = smi_subcomm_node;
|
|
|
|
plarbdev = of_find_device_by_node(smicomm_node);
|
|
of_node_put(smicomm_node);
|
|
data->smicomm_dev = &plarbdev->dev;
|
|
|
|
link = device_link_add(data->smicomm_dev, dev,
|
|
DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME);
|
|
if (!link) {
|
|
dev_err(dev, "Unable to link %s.\n", dev_name(data->smicomm_dev));
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_iommu_probe(struct platform_device *pdev)
|
|
{
|
|
struct mtk_iommu_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
resource_size_t ioaddr;
|
|
struct component_match *match = NULL;
|
|
struct regmap *infracfg;
|
|
void *protect;
|
|
int ret, banks_num, i = 0;
|
|
u32 val;
|
|
char *p;
|
|
struct mtk_iommu_bank_data *bank;
|
|
void __iomem *base;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
data->dev = dev;
|
|
data->plat_data = of_device_get_match_data(dev);
|
|
|
|
/* Protect memory. HW will access here while translation fault.*/
|
|
protect = devm_kzalloc(dev, MTK_PROTECT_PA_ALIGN * 2, GFP_KERNEL);
|
|
if (!protect)
|
|
return -ENOMEM;
|
|
data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE)) {
|
|
switch (data->plat_data->m4u_plat) {
|
|
case M4U_MT2712:
|
|
p = "mediatek,mt2712-infracfg";
|
|
break;
|
|
case M4U_MT8173:
|
|
p = "mediatek,mt8173-infracfg";
|
|
break;
|
|
default:
|
|
p = NULL;
|
|
}
|
|
|
|
infracfg = syscon_regmap_lookup_by_compatible(p);
|
|
|
|
if (IS_ERR(infracfg))
|
|
return PTR_ERR(infracfg);
|
|
|
|
ret = regmap_read(infracfg, REG_INFRA_MISC, &val);
|
|
if (ret)
|
|
return ret;
|
|
data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);
|
|
}
|
|
|
|
banks_num = data->plat_data->banks_num;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (resource_size(res) < banks_num * MTK_IOMMU_BANK_SZ) {
|
|
dev_err(dev, "banknr %d. res %pR is not enough.\n", banks_num, res);
|
|
return -EINVAL;
|
|
}
|
|
base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
ioaddr = res->start;
|
|
|
|
data->bank = devm_kmalloc(dev, banks_num * sizeof(*data->bank), GFP_KERNEL);
|
|
if (!data->bank)
|
|
return -ENOMEM;
|
|
|
|
do {
|
|
if (!data->plat_data->banks_enable[i])
|
|
continue;
|
|
bank = &data->bank[i];
|
|
bank->id = i;
|
|
bank->base = base + i * MTK_IOMMU_BANK_SZ;
|
|
bank->m4u_dom = NULL;
|
|
|
|
bank->irq = platform_get_irq(pdev, i);
|
|
if (bank->irq < 0)
|
|
return bank->irq;
|
|
bank->parent_dev = dev;
|
|
bank->parent_data = data;
|
|
spin_lock_init(&bank->tlb_lock);
|
|
} while (++i < banks_num);
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)) {
|
|
data->bclk = devm_clk_get(dev, "bclk");
|
|
if (IS_ERR(data->bclk))
|
|
return PTR_ERR(data->bclk);
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
ret = mtk_iommu_mm_dts_parse(dev, &match, data);
|
|
if (ret) {
|
|
dev_err(dev, "mm dts parse fail(%d).", ret);
|
|
goto out_runtime_disable;
|
|
}
|
|
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
|
|
data->plat_data->pericfg_comp_str) {
|
|
infracfg = syscon_regmap_lookup_by_compatible(data->plat_data->pericfg_comp_str);
|
|
if (IS_ERR(infracfg)) {
|
|
ret = PTR_ERR(infracfg);
|
|
goto out_runtime_disable;
|
|
}
|
|
|
|
data->pericfg = infracfg;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
mutex_init(&data->mutex);
|
|
|
|
ret = iommu_device_sysfs_add(&data->iommu, dev, NULL,
|
|
"mtk-iommu.%pa", &ioaddr);
|
|
if (ret)
|
|
goto out_link_remove;
|
|
|
|
ret = iommu_device_register(&data->iommu, &mtk_iommu_ops, dev);
|
|
if (ret)
|
|
goto out_sysfs_remove;
|
|
|
|
if (MTK_IOMMU_HAS_FLAG(data->plat_data, SHARE_PGTABLE)) {
|
|
list_add_tail(&data->list, data->plat_data->hw_list);
|
|
data->hw_list = data->plat_data->hw_list;
|
|
} else {
|
|
INIT_LIST_HEAD(&data->hw_list_head);
|
|
list_add_tail(&data->list, &data->hw_list_head);
|
|
data->hw_list = &data->hw_list_head;
|
|
}
|
|
|
|
if (!iommu_present(&platform_bus_type)) {
|
|
ret = bus_set_iommu(&platform_bus_type, &mtk_iommu_ops);
|
|
if (ret)
|
|
goto out_list_del;
|
|
}
|
|
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
ret = component_master_add_with_match(dev, &mtk_iommu_com_ops, match);
|
|
if (ret)
|
|
goto out_bus_set_null;
|
|
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
|
|
MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) {
|
|
#ifdef CONFIG_PCI
|
|
if (!iommu_present(&pci_bus_type)) {
|
|
ret = bus_set_iommu(&pci_bus_type, &mtk_iommu_ops);
|
|
if (ret) /* PCIe fail don't affect platform_bus. */
|
|
goto out_list_del;
|
|
}
|
|
#endif
|
|
}
|
|
return ret;
|
|
|
|
out_bus_set_null:
|
|
bus_set_iommu(&platform_bus_type, NULL);
|
|
out_list_del:
|
|
list_del(&data->list);
|
|
iommu_device_unregister(&data->iommu);
|
|
out_sysfs_remove:
|
|
iommu_device_sysfs_remove(&data->iommu);
|
|
out_link_remove:
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM))
|
|
device_link_remove(data->smicomm_dev, dev);
|
|
out_runtime_disable:
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int mtk_iommu_remove(struct platform_device *pdev)
|
|
{
|
|
struct mtk_iommu_data *data = platform_get_drvdata(pdev);
|
|
struct mtk_iommu_bank_data *bank;
|
|
int i;
|
|
|
|
iommu_device_sysfs_remove(&data->iommu);
|
|
iommu_device_unregister(&data->iommu);
|
|
|
|
list_del(&data->list);
|
|
|
|
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
|
|
device_link_remove(data->smicomm_dev, &pdev->dev);
|
|
component_master_del(&pdev->dev, &mtk_iommu_com_ops);
|
|
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
|
|
MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) {
|
|
#ifdef CONFIG_PCI
|
|
bus_set_iommu(&pci_bus_type, NULL);
|
|
#endif
|
|
}
|
|
pm_runtime_disable(&pdev->dev);
|
|
for (i = 0; i < data->plat_data->banks_num; i++) {
|
|
bank = &data->bank[i];
|
|
if (!bank->m4u_dom)
|
|
continue;
|
|
devm_free_irq(&pdev->dev, bank->irq, bank);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mtk_iommu_runtime_suspend(struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_get_drvdata(dev);
|
|
struct mtk_iommu_suspend_reg *reg = &data->reg;
|
|
void __iomem *base;
|
|
int i = 0;
|
|
|
|
base = data->bank[i].base;
|
|
reg->wr_len_ctrl = readl_relaxed(base + REG_MMU_WR_LEN_CTRL);
|
|
reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
|
|
reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
|
|
reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
|
|
reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
|
|
do {
|
|
if (!data->plat_data->banks_enable[i])
|
|
continue;
|
|
base = data->bank[i].base;
|
|
reg->int_control[i] = readl_relaxed(base + REG_MMU_INT_CONTROL0);
|
|
reg->int_main_control[i] = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
|
|
reg->ivrp_paddr[i] = readl_relaxed(base + REG_MMU_IVRP_PADDR);
|
|
} while (++i < data->plat_data->banks_num);
|
|
clk_disable_unprepare(data->bclk);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
|
|
{
|
|
struct mtk_iommu_data *data = dev_get_drvdata(dev);
|
|
struct mtk_iommu_suspend_reg *reg = &data->reg;
|
|
struct mtk_iommu_domain *m4u_dom;
|
|
void __iomem *base;
|
|
int ret, i = 0;
|
|
|
|
ret = clk_prepare_enable(data->bclk);
|
|
if (ret) {
|
|
dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Uppon first resume, only enable the clk and return, since the values of the
|
|
* registers are not yet set.
|
|
*/
|
|
if (!reg->wr_len_ctrl)
|
|
return 0;
|
|
|
|
base = data->bank[i].base;
|
|
writel_relaxed(reg->wr_len_ctrl, base + REG_MMU_WR_LEN_CTRL);
|
|
writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
|
|
writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
|
|
writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
|
|
writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
|
|
do {
|
|
m4u_dom = data->bank[i].m4u_dom;
|
|
if (!data->plat_data->banks_enable[i] || !m4u_dom)
|
|
continue;
|
|
base = data->bank[i].base;
|
|
writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
|
|
writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
|
|
writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
|
|
writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
|
|
base + REG_MMU_PT_BASE_ADDR);
|
|
} while (++i < data->plat_data->banks_num);
|
|
|
|
/*
|
|
* Users may allocate dma buffer before they call pm_runtime_get,
|
|
* in which case it will lack the necessary tlb flush.
|
|
* Thus, make sure to update the tlb after each PM resume.
|
|
*/
|
|
mtk_iommu_tlb_flush_all(data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops mtk_iommu_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(mtk_iommu_runtime_suspend, mtk_iommu_runtime_resume, NULL)
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt2712_data = {
|
|
.m4u_plat = M4U_MT2712,
|
|
.flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG | SHARE_PGTABLE |
|
|
MTK_IOMMU_TYPE_MM,
|
|
.hw_list = &m4ulist,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
|
|
.iova_region = single_domain,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt6779_data = {
|
|
.m4u_plat = M4U_MT6779,
|
|
.flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
|
|
MTK_IOMMU_TYPE_MM,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = single_domain,
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
.larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8167_data = {
|
|
.m4u_plat = M4U_MT8167,
|
|
.flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = single_domain,
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8173_data = {
|
|
.m4u_plat = M4U_MT8173,
|
|
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI |
|
|
HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = single_domain,
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8183_data = {
|
|
.m4u_plat = M4U_MT8183,
|
|
.flags = RESET_AXI | MTK_IOMMU_TYPE_MM,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = single_domain,
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8186_data_mm = {
|
|
.m4u_plat = M4U_MT8186,
|
|
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
|
|
WR_THROT_EN | IOVA_34_EN | MTK_IOMMU_TYPE_MM,
|
|
.larbid_remap = {{0}, {1, MTK_INVALID_LARBID, 8}, {4}, {7}, {2}, {9, 11, 19, 20},
|
|
{MTK_INVALID_LARBID, 14, 16},
|
|
{MTK_INVALID_LARBID, 13, MTK_INVALID_LARBID, 17}},
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = mt8192_multi_dom,
|
|
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8192_data = {
|
|
.m4u_plat = M4U_MT8192,
|
|
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
|
|
WR_THROT_EN | IOVA_34_EN | MTK_IOMMU_TYPE_MM,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = mt8192_multi_dom,
|
|
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
|
|
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
|
|
{0, 14, 16}, {0, 13, 18, 17}},
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8195_data_infra = {
|
|
.m4u_plat = M4U_MT8195,
|
|
.flags = WR_THROT_EN | DCM_DISABLE | STD_AXI_MODE | PM_CLK_AO |
|
|
MTK_IOMMU_TYPE_INFRA | IFA_IOMMU_PCIE_SUPPORT,
|
|
.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 5,
|
|
.banks_enable = {true, false, false, false, true},
|
|
.banks_portmsk = {[0] = GENMASK(19, 16), /* PCIe */
|
|
[4] = GENMASK(31, 20), /* USB */
|
|
},
|
|
.iova_region = single_domain,
|
|
.iova_region_nr = ARRAY_SIZE(single_domain),
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8195_data_vdo = {
|
|
.m4u_plat = M4U_MT8195,
|
|
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
|
|
WR_THROT_EN | IOVA_34_EN | SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
|
|
.hw_list = &m4ulist,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = mt8192_multi_dom,
|
|
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
|
|
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
|
|
{13, 17, 15/* 17b */, 25}, {5}},
|
|
};
|
|
|
|
static const struct mtk_iommu_plat_data mt8195_data_vpp = {
|
|
.m4u_plat = M4U_MT8195,
|
|
.flags = HAS_BCLK | HAS_SUB_COMM_3BITS | OUT_ORDER_WR_EN |
|
|
WR_THROT_EN | IOVA_34_EN | SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
|
|
.hw_list = &m4ulist,
|
|
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
|
|
.banks_num = 1,
|
|
.banks_enable = {true},
|
|
.iova_region = mt8192_multi_dom,
|
|
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
|
|
.larbid_remap = {{1}, {3},
|
|
{22, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 23},
|
|
{8}, {20}, {12},
|
|
/* 16: 16a; 29: 16b; 30: CCUtop0; 31: CCUtop1 */
|
|
{14, 16, 29, 26, 30, 31, 18},
|
|
{4, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 6}},
|
|
};
|
|
|
|
static const struct of_device_id mtk_iommu_of_ids[] = {
|
|
{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
|
|
{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
|
|
{ .compatible = "mediatek,mt8167-m4u", .data = &mt8167_data},
|
|
{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
|
|
{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
|
|
{ .compatible = "mediatek,mt8186-iommu-mm", .data = &mt8186_data_mm}, /* mm: m4u */
|
|
{ .compatible = "mediatek,mt8192-m4u", .data = &mt8192_data},
|
|
{ .compatible = "mediatek,mt8195-iommu-infra", .data = &mt8195_data_infra},
|
|
{ .compatible = "mediatek,mt8195-iommu-vdo", .data = &mt8195_data_vdo},
|
|
{ .compatible = "mediatek,mt8195-iommu-vpp", .data = &mt8195_data_vpp},
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver mtk_iommu_driver = {
|
|
.probe = mtk_iommu_probe,
|
|
.remove = mtk_iommu_remove,
|
|
.driver = {
|
|
.name = "mtk-iommu",
|
|
.of_match_table = mtk_iommu_of_ids,
|
|
.pm = &mtk_iommu_pm_ops,
|
|
}
|
|
};
|
|
module_platform_driver(mtk_iommu_driver);
|
|
|
|
MODULE_DESCRIPTION("IOMMU API for MediaTek M4U implementations");
|
|
MODULE_LICENSE("GPL v2");
|