mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
fe69af002e
This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
38 lines
1.4 KiB
Makefile
38 lines
1.4 KiB
Makefile
#
|
|
# linux/drivers/nand/Makefile
|
|
#
|
|
# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
|
|
|
|
obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
|
|
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
|
|
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
|
|
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
|
|
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
|
|
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
|
|
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
|
|
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
|
|
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
|
|
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
|
|
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
|
|
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
|
|
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
|
|
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
|
|
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
|
|
obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
|
|
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
|
|
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
|
|
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
|
|
obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
|
|
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
|
|
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
|
|
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
|
|
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
|
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
|
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
|
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
|
obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
|
|
|
|
nand-objs := nand_base.o nand_bbt.o
|