Bruce Allan fddaa1aff8 e1000e: MDIO slow mode should always be done for 82577 ... A previous 82577 workaround that set the MDIO access speed to slow mode for every PHY register read/write when the cable is unplugged should instead set the access mode to always be slow before any PHY register access. Since the mode bit gets cleared when the PHY is reset, set the mode after every PHY reset. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-01-13 17:12:46 -08:00
..
82571.c	e1000e: perform 10/100 adaptive IFS only on parts that support it	2010-01-08 00:35:30 -08:00
defines.h	e1000e: minor correction to name of bit in CTRL_EXT register	2009-12-08 20:10:11 -08:00
e1000.h	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00
es2lan.c	e1000e: perform 10/100 adaptive IFS only on parts that support it	2010-01-08 00:35:30 -08:00
ethtool.c	e1000e: Use sizeof struct rather than pointer in e1000_get_eeprom()	2009-12-02 00:35:56 -08:00
hw.h	e1000e: perform 10/100 adaptive IFS only on parts that support it	2010-01-08 00:35:30 -08:00
ich8lan.c	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00
lib.c	e1000e: fix and commonize code for setting the receive address registers	2010-01-08 00:35:31 -08:00
Makefile	e1000e: reformat comment blocks, cosmetic changes only	2008-03-28 22:14:56 -04:00
netdev.c	e1000e: don't accumulate PHY statistics on PHY read failure	2010-01-08 00:35:30 -08:00
param.c	e1000e: update copyright information	2009-11-21 11:34:09 -08:00
phy.c	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00