2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
linux-next/include/dt-bindings/pinctrl
Dave Gerlach 10b2185514 ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding
According to AM437x TRM, Document SPRUHL7B, Revised December 2014,
Section 7.2.1 Pad Control Registers, setting bit 19 of the pad control
registers actually sets the SLEWCTRL value to slow rather than fast as
the current macro indicates. Introduce a new macro, SLEWCTRL_SLOW, that
sets the bit, and modify SLEWCTRL_FAST to 0 but keep it for
completeness.

Current users of the macro (i2c, mdio, and uart) are left unmodified as
SLEWCTRL_FAST was the macro used and actual desired state. Tested on
am437x-gp-evm with no difference in software performance seen.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 09:21:03 -08:00
..
am33xx.h ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding 2015-03-06 09:12:56 -08:00
am43xx.h ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding 2015-03-06 09:21:03 -08:00
at91.h pinctrl: at91: add drive strength configuration 2014-09-05 10:32:06 +02:00
dra.h pinctrl: dra: dt-bindings: Fix output pull up/down 2014-11-10 14:29:20 -08:00
nomadik.h ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 2013-08-06 23:48:50 +02:00
omap.h ARM: dts: Add minimal support for dm8168-evm 2015-01-19 11:47:35 -08:00
pinctrl-tegra-xusb.h of: Add NVIDIA Tegra XUSB pad controller binding 2014-07-11 14:40:41 +02:00
pinctrl-tegra.h ARM: tegra: Add header file for pinctrl constants 2013-12-16 14:09:20 -07:00
qcom,pmic-gpio.h pinctrl: Device tree bindings for Qualcomm PMIC GPIO block 2014-10-29 09:28:36 +01:00
qcom,pmic-mpp.h pinctrl: Device tree bindings for Qualcomm PMIC MPP block 2014-10-29 09:28:36 +01:00
rockchip.h pinctrl: Add mux options 3 and 4 for rockchip pinctrl 2014-08-28 15:18:03 +02:00
sun4i-a10.h ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodes 2015-01-21 09:58:57 +01:00