mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
173192958d
Core:
- Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up()
at boot/initialization time if it's already happened, for performance
(faster boot time) reasons.
- Fix a bit width test failure that resulted in old eMMC cards being put
into 1-bit mode when 4-bit mode was available.
- Expose fwrev/hwrev for MMCv4 parts.
- Improve card removal logic in the case where the card's removed slowly;
we were missing card removal events if the card retained contact with
the slot pads for long enough to reply to a CMD13 while being removed.
Drivers:
- davinci_mmc: Support using PIO instead of DMA.
- dw_mmc: Add support for Exynos4412.
- mxcmmc: DT support, use slot-gpio API.
- mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support.
- sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
SiRFprimaII: unicore ARM Cortex-A9
SiRFatlas6: unicore ARM Cortex-A9
SiRFmarco: dual core ARM Cortex-A9 SMP
- sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Pr7P
-----END PGP SIGNATURE-----
Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC update from Chris Ball:
"MMC highlights for 3.10:
Core:
- Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping
mmc_power_up() at boot/initialization time if it's already
happened, for performance (faster boot time) reasons.
- Fix a bit width test failure that resulted in old eMMC cards being
put into 1-bit mode when 4-bit mode was available.
- Expose fwrev/hwrev for MMCv4 parts.
- Improve card removal logic in the case where the card's removed
slowly; we were missing card removal events if the card retained
contact with the slot pads for long enough to reply to a CMD13
while being removed.
Drivers:
- davinci_mmc: Support using PIO instead of DMA.
- dw_mmc: Add support for Exynos4412.
- mxcmmc: DT support, use slot-gpio API.
- mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property
support.
- sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
SiRFprimaII: unicore ARM Cortex-A9
SiRFatlas6: unicore ARM Cortex-A9
SiRFmarco: dual core ARM Cortex-A9 SMP
- sdhci-tegra: Add support for Tegra114 platforms, use
mmc_of_parse()"
* tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
mmc: core: fix init controller performance regression, updated patch
mmc: mxcmmc: enable DMA support on mpc512x
mmc: mxcmmc: constify mxcmci_devtype
mmc: mxcmmc: use slot-gpio API for write-protect detection
mmc: mxcmmc: add mpc512x SDHC support
mmc: mxcmmc: fix race conditions for host->req and host->data access
mmc: mxcmmc: DT support
mmc: dw_mmc: let device core setup the default pin configuration
mmc: mxs-mmc: add broken-cd property
mmc: mxs-mmc: add non-removable property
mmc: mxs-mmc: add cd-inverted property
mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
mmc: mxcmmc: Fix bug when card is present during boot
mmc: core: fix performance regression initializing MMC host controllers
Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
mmc: atmel-mci: pio hang on block errors
mmc: core: Fix bit width test failing on old eMMC cards
mmc: dw_mmc: Use pr_info instead of printk
mmc: dw_mmc: Check return value of regulator_enable
...
211 lines
5.0 KiB
Plaintext
211 lines
5.0 KiB
Plaintext
CONFIG_EXPERIMENTAL=y
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
CONFIG_SYSFS_DEPRECATED_V2=y
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_EMBEDDED=y
|
|
CONFIG_SLAB=y
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_LBDAF is not set
|
|
# CONFIG_BLK_DEV_BSG is not set
|
|
# CONFIG_IOSCHED_DEADLINE is not set
|
|
# CONFIG_IOSCHED_CFQ is not set
|
|
CONFIG_ARCH_AT91=y
|
|
CONFIG_ARCH_AT91SAM9G45=y
|
|
CONFIG_MACH_AT91SAM9M10G45EK=y
|
|
CONFIG_MACH_AT91SAM9_DT=y
|
|
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
CONFIG_AT91_SLOW_CLOCK=y
|
|
CONFIG_AEABI=y
|
|
# CONFIG_OABI_COMPAT is not set
|
|
CONFIG_LEDS=y
|
|
CONFIG_LEDS_CPU=y
|
|
CONFIG_UACCESS_WITH_MEMCPY=y
|
|
CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
|
|
CONFIG_AUTO_ZRELADDR=y
|
|
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
|
CONFIG_NET=y
|
|
CONFIG_PACKET=y
|
|
CONFIG_UNIX=y
|
|
CONFIG_INET=y
|
|
CONFIG_IP_MULTICAST=y
|
|
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
# CONFIG_INET_DIAG is not set
|
|
CONFIG_IPV6=y
|
|
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
|
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
|
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
|
CONFIG_IPV6_SIT_6RD=y
|
|
CONFIG_CFG80211=y
|
|
CONFIG_LIB80211=y
|
|
CONFIG_MAC80211=y
|
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_DEVTMPFS=y
|
|
CONFIG_DEVTMPFS_MOUNT=y
|
|
# CONFIG_STANDALONE is not set
|
|
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_CMDLINE_PARTS=y
|
|
CONFIG_MTD_CHAR=y
|
|
CONFIG_MTD_BLOCK=y
|
|
CONFIG_MTD_DATAFLASH=y
|
|
CONFIG_MTD_NAND=y
|
|
CONFIG_MTD_NAND_ATMEL=y
|
|
CONFIG_MTD_UBI=y
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
CONFIG_BLK_DEV_RAM=y
|
|
CONFIG_BLK_DEV_RAM_COUNT=4
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
CONFIG_MISC_DEVICES=y
|
|
CONFIG_ATMEL_PWM=y
|
|
CONFIG_ATMEL_TCLIB=y
|
|
CONFIG_SCSI=y
|
|
CONFIG_BLK_DEV_SD=y
|
|
CONFIG_SCSI_MULTI_LUN=y
|
|
# CONFIG_SCSI_LOWLEVEL is not set
|
|
CONFIG_NETDEVICES=y
|
|
CONFIG_MII=y
|
|
CONFIG_MACB=y
|
|
CONFIG_DAVICOM_PHY=y
|
|
CONFIG_LIBERTAS_THINFIRM=m
|
|
CONFIG_LIBERTAS_THINFIRM_USB=m
|
|
CONFIG_AT76C50X_USB=m
|
|
CONFIG_USB_ZD1201=m
|
|
CONFIG_RTL8187=m
|
|
CONFIG_ATH_COMMON=m
|
|
CONFIG_ATH9K=m
|
|
CONFIG_CARL9170=m
|
|
CONFIG_B43=m
|
|
CONFIG_B43_PHY_N=y
|
|
CONFIG_LIBERTAS=m
|
|
CONFIG_LIBERTAS_USB=m
|
|
CONFIG_LIBERTAS_SDIO=m
|
|
CONFIG_LIBERTAS_SPI=m
|
|
CONFIG_RT2X00=m
|
|
CONFIG_RT2500USB=m
|
|
CONFIG_RT73USB=m
|
|
CONFIG_RT2800USB=m
|
|
CONFIG_RT2800USB_RT53XX=y
|
|
CONFIG_RT2800USB_UNKNOWN=y
|
|
CONFIG_RTL8192CU=m
|
|
CONFIG_WL1251=m
|
|
CONFIG_WL1251_SDIO=m
|
|
CONFIG_WL12XX_MENU=m
|
|
CONFIG_WL12XX=m
|
|
CONFIG_WL12XX_SDIO=m
|
|
CONFIG_ZD1211RW=m
|
|
CONFIG_MWIFIEX=m
|
|
CONFIG_MWIFIEX_SDIO=m
|
|
CONFIG_INPUT_POLLDEV=m
|
|
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
|
|
CONFIG_INPUT_JOYDEV=y
|
|
CONFIG_INPUT_EVDEV=y
|
|
# CONFIG_KEYBOARD_ATKBD is not set
|
|
CONFIG_KEYBOARD_QT1070=m
|
|
CONFIG_KEYBOARD_QT2160=m
|
|
CONFIG_KEYBOARD_GPIO=y
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
CONFIG_INPUT_TOUCHSCREEN=y
|
|
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
|
|
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
|
|
# CONFIG_SERIO is not set
|
|
CONFIG_LEGACY_PTY_COUNT=4
|
|
CONFIG_SERIAL_ATMEL=y
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
CONFIG_HW_RANDOM=y
|
|
CONFIG_I2C=y
|
|
CONFIG_I2C_GPIO=y
|
|
CONFIG_SPI=y
|
|
CONFIG_SPI_ATMEL=y
|
|
# CONFIG_HWMON is not set
|
|
CONFIG_FB=y
|
|
CONFIG_FB_ATMEL=y
|
|
CONFIG_FB_UDL=m
|
|
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
# CONFIG_LCD_CLASS_DEVICE is not set
|
|
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
|
CONFIG_BACKLIGHT_ATMEL_LCDC=y
|
|
# CONFIG_BACKLIGHT_GENERIC is not set
|
|
CONFIG_SOUND=y
|
|
CONFIG_SND=y
|
|
CONFIG_SND_SEQUENCER=y
|
|
CONFIG_SND_MIXER_OSS=y
|
|
CONFIG_SND_PCM_OSS=y
|
|
# CONFIG_SND_SUPPORT_OLD_API is not set
|
|
# CONFIG_SND_VERBOSE_PROCFS is not set
|
|
# CONFIG_SND_DRIVERS is not set
|
|
# CONFIG_SND_ARM is not set
|
|
CONFIG_SND_ATMEL_AC97C=y
|
|
# CONFIG_SND_SPI is not set
|
|
CONFIG_SND_USB_AUDIO=m
|
|
# CONFIG_USB_HID is not set
|
|
CONFIG_USB=y
|
|
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
|
CONFIG_USB_DEVICEFS=y
|
|
# CONFIG_USB_DEVICE_CLASS is not set
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_ACM=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_ATMEL_USBA=m
|
|
CONFIG_USB_ZERO=m
|
|
CONFIG_USB_AUDIO=m
|
|
CONFIG_USB_ETH=m
|
|
CONFIG_USB_ETH_EEM=y
|
|
CONFIG_USB_MASS_STORAGE=m
|
|
CONFIG_USB_G_SERIAL=m
|
|
CONFIG_USB_CDC_COMPOSITE=m
|
|
CONFIG_USB_G_MULTI=m
|
|
CONFIG_USB_G_MULTI_CDC=y
|
|
CONFIG_MMC=y
|
|
# CONFIG_MMC_BLOCK_BOUNCE is not set
|
|
CONFIG_SDIO_UART=m
|
|
CONFIG_MMC_ATMELMCI=y
|
|
CONFIG_LEDS_ATMEL_PWM=y
|
|
CONFIG_LEDS_GPIO=y
|
|
CONFIG_LEDS_TRIGGER_TIMER=y
|
|
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|
CONFIG_LEDS_TRIGGER_GPIO=y
|
|
CONFIG_RTC_CLASS=y
|
|
CONFIG_RTC_DRV_AT91RM9200=y
|
|
CONFIG_DMADEVICES=y
|
|
CONFIG_AT_HDMAC=y
|
|
CONFIG_DMATEST=m
|
|
# CONFIG_IOMMU_SUPPORT is not set
|
|
CONFIG_EXT2_FS=y
|
|
CONFIG_FANOTIFY=y
|
|
CONFIG_VFAT_FS=y
|
|
CONFIG_TMPFS=y
|
|
CONFIG_JFFS2_FS=y
|
|
CONFIG_JFFS2_SUMMARY=y
|
|
CONFIG_CRAMFS=m
|
|
CONFIG_SQUASHFS=m
|
|
CONFIG_SQUASHFS_EMBEDDED=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3=y
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
CONFIG_NLS_CODEPAGE_850=y
|
|
CONFIG_NLS_ISO8859_1=y
|
|
CONFIG_STRIP_ASM_SYMS=y
|
|
# CONFIG_SCHED_DEBUG is not set
|
|
CONFIG_DEBUG_MEMORY_INIT=y
|
|
# CONFIG_FTRACE is not set
|
|
CONFIG_DEBUG_USER=y
|
|
CONFIG_CRYPTO_ECB=y
|
|
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
|
CONFIG_CRYPTO_USER_API_HASH=m
|
|
CONFIG_CRYPTO_USER_API_SKCIPHER=m
|
|
# CONFIG_CRYPTO_HW is not set
|