mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
fbbe0bff9d
This converts and moves pxa_dma file with some format changes for RST style Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
191 lines
6.6 KiB
ReStructuredText
191 lines
6.6 KiB
ReStructuredText
==============================
|
|
PXA/MMP - DMA Slave controller
|
|
==============================
|
|
|
|
Constraints
|
|
===========
|
|
|
|
a) Transfers hot queuing
|
|
A driver submitting a transfer and issuing it should be granted the transfer
|
|
is queued even on a running DMA channel.
|
|
This implies that the queuing doesn't wait for the previous transfer end,
|
|
and that the descriptor chaining is not only done in the irq/tasklet code
|
|
triggered by the end of the transfer.
|
|
A transfer which is submitted and issued on a phy doesn't wait for a phy to
|
|
stop and restart, but is submitted on a "running channel". The other
|
|
drivers, especially mmp_pdma waited for the phy to stop before relaunching
|
|
a new transfer.
|
|
|
|
b) All transfers having asked for confirmation should be signaled
|
|
Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call.
|
|
This implies that even if an irq/tasklet is triggered by end of tx1, but
|
|
at the time of irq/dma tx2 is already finished, tx1->complete() and
|
|
tx2->complete() should be called.
|
|
|
|
c) Channel running state
|
|
A driver should be able to query if a channel is running or not. For the
|
|
multimedia case, such as video capture, if a transfer is submitted and then
|
|
a check of the DMA channel reports a "stopped channel", the transfer should
|
|
not be issued until the next "start of frame interrupt", hence the need to
|
|
know if a channel is in running or stopped state.
|
|
|
|
d) Bandwidth guarantee
|
|
The PXA architecture has 4 levels of DMAs priorities : high, normal, low.
|
|
The high priorities get twice as much bandwidth as the normal, which get twice
|
|
as much as the low priorities.
|
|
A driver should be able to request a priority, especially the real-time
|
|
ones such as pxa_camera with (big) throughputs.
|
|
|
|
Design
|
|
======
|
|
a) Virtual channels
|
|
Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual
|
|
channel" linked to the requestor line, and the physical DMA channel is
|
|
assigned on the fly when the transfer is issued.
|
|
|
|
b) Transfer anatomy for a scatter-gather transfer
|
|
|
|
::
|
|
|
|
+------------+-----+---------------+----------------+-----------------+
|
|
| desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker |
|
|
+------------+-----+---------------+----------------+-----------------+
|
|
|
|
This structure is pointed by dma->sg_cpu.
|
|
The descriptors are used as follows :
|
|
|
|
- desc-sg[i]: i-th descriptor, transferring the i-th sg
|
|
element to the video buffer scatter gather
|
|
|
|
- status updater
|
|
Transfers a single u32 to a well known dma coherent memory to leave
|
|
a trace that this transfer is done. The "well known" is unique per
|
|
physical channel, meaning that a read of this value will tell which
|
|
is the last finished transfer at that point in time.
|
|
|
|
- finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
|
|
|
|
- linker: has ddadr= desc-sg[0] of next transfer, dcmd=0
|
|
|
|
c) Transfers hot-chaining
|
|
Suppose the running chain is:
|
|
|
|
::
|
|
|
|
Buffer 1 Buffer 2
|
|
+---------+----+---+ +----+----+----+---+
|
|
| d0 | .. | dN | l | | d0 | .. | dN | f |
|
|
+---------+----+-|-+ ^----+----+----+---+
|
|
| |
|
|
+----+
|
|
|
|
After a call to dmaengine_submit(b3), the chain will look like:
|
|
|
|
::
|
|
|
|
Buffer 1 Buffer 2 Buffer 3
|
|
+---------+----+---+ +----+----+----+---+ +----+----+----+---+
|
|
| d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f |
|
|
+---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+
|
|
| | | |
|
|
+----+ +----+
|
|
new_link
|
|
|
|
If while new_link was created the DMA channel stopped, it is _not_
|
|
restarted. Hot-chaining doesn't break the assumption that
|
|
dma_async_issue_pending() is to be used to ensure the transfer is actually started.
|
|
|
|
One exception to this rule :
|
|
|
|
- if Buffer1 and Buffer2 had all their addresses 8 bytes aligned
|
|
|
|
- and if Buffer3 has at least one address not 4 bytes aligned
|
|
|
|
- then hot-chaining cannot happen, as the channel must be stopped, the
|
|
"align bit" must be set, and the channel restarted As a consequence,
|
|
such a transfer tx_submit() will be queued on the submitted queue, and
|
|
this specific case if the DMA is already running in aligned mode.
|
|
|
|
d) Transfers completion updater
|
|
Each time a transfer is completed on a channel, an interrupt might be
|
|
generated or not, up to the client's request. But in each case, the last
|
|
descriptor of a transfer, the "status updater", will write the latest
|
|
transfer being completed into the physical channel's completion mark.
|
|
|
|
This will speed up residue calculation, for large transfers such as video
|
|
buffers which hold around 6k descriptors or more. This also allows without
|
|
any lock to find out what is the latest completed transfer in a running
|
|
DMA chain.
|
|
|
|
e) Transfers completion, irq and tasklet
|
|
When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq
|
|
is raised. Upon this interrupt, a tasklet is scheduled for the physical
|
|
channel.
|
|
|
|
The tasklet is responsible for :
|
|
|
|
- reading the physical channel last updater mark
|
|
|
|
- calling all the transfer callbacks of finished transfers, based on
|
|
that mark, and each transfer flags.
|
|
|
|
If a transfer is completed while this handling is done, a dma irq will
|
|
be raised, and the tasklet will be scheduled once again, having a new
|
|
updater mark.
|
|
|
|
f) Residue
|
|
Residue granularity will be descriptor based. The issued but not completed
|
|
transfers will be scanned for all of their descriptors against the
|
|
currently running descriptor.
|
|
|
|
g) Most complicated case of driver's tx queues
|
|
The most tricky situation is when :
|
|
|
|
- there are not "acked" transfers (tx0)
|
|
|
|
- a driver submitted an aligned tx1, not chained
|
|
|
|
- a driver submitted an aligned tx2 => tx2 is cold chained to tx1
|
|
|
|
- a driver issued tx1+tx2 => channel is running in aligned mode
|
|
|
|
- a driver submitted an aligned tx3 => tx3 is hot-chained
|
|
|
|
- a driver submitted an unaligned tx4 => tx4 is put in submitted queue,
|
|
not chained
|
|
|
|
- a driver issued tx4 => tx4 is put in issued queue, not chained
|
|
|
|
- a driver submitted an aligned tx5 => tx5 is put in submitted queue, not
|
|
chained
|
|
|
|
- a driver submitted an aligned tx6 => tx6 is put in submitted queue,
|
|
cold chained to tx5
|
|
|
|
This translates into (after tx4 is issued) :
|
|
|
|
- issued queue
|
|
|
|
::
|
|
|
|
+-----+ +-----+ +-----+ +-----+
|
|
| tx1 | | tx2 | | tx3 | | tx4 |
|
|
+---|-+ ^---|-+ ^-----+ +-----+
|
|
| | | |
|
|
+---+ +---+
|
|
- submitted queue
|
|
+-----+ +-----+
|
|
| tx5 | | tx6 |
|
|
+---|-+ ^-----+
|
|
| |
|
|
+---+
|
|
|
|
- completed queue : empty
|
|
|
|
- allocated queue : tx0
|
|
|
|
It should be noted that after tx3 is completed, the channel is stopped, and
|
|
restarted in "unaligned mode" to handle tx4.
|
|
|
|
Author: Robert Jarzmik <robert.jarzmik@free.fr>
|