renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
Code
fabbe6df13
linux-next/arch/arm/mach-omap2/hsmmc.c
Andreas Fenkart b7a5646fa5 ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 
board-rx51 has no card detect pin in the mmc slot, but can detect that
the (cell-phone) cover has been removed and the card is accessible.
The semantics between cover/card detect differ, the gpio on the slot
informs you after the card has been removed, cover removal does not
necessarily mean that the card has been removed.
This means different code paths are necessary. To complete this we
also want different fields in the platform data for cover and card
detect. This separation is not pushed all the way down into struct
omap2_hsmmc_info which is used to initialize the platform data.
If we did that we had to go over all board files and set the new
gpio_cod pin to -EINVAL. If we forget one board or some out-of-tree
archicture forgets that the default '0' is used which is a valid pin
number.

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-27 12:19:37 +01:00

506 lines
12 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/hsmmc.c
*
* Copyright (C) 2007-2008 Texas Instruments
* Copyright (C) 2008 Nokia Corporation
* Author: Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
static void omap_hsmmc1_before_set_reg(struct device *dev,
int power_on, int vdd)
{
u32 reg, prog_io;
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (mmc->remux)
mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
*
* FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
if ((1 << vdd) >= MMC_VDD_30_31)
reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
else
reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
}
reg = omap_ctrl_readl(control_pbias_offset);
if (cpu_is_omap3630()) {
/* Set MMC I/O to 52Mhz */
prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
} else {
reg |= OMAP2_PBIASSPEEDCTRL0;
}
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
reg = omap_ctrl_readl(control_pbias_offset);
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
}
}
static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
/* 100ms delay required for PBIAS configuration */
msleep(100);
if (power_on) {
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
if ((1 << vdd) <= MMC_VDD_165_195)
reg &= ~OMAP2_PBIASLITEVMODE0;
else
reg |= OMAP2_PBIASLITEVMODE0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
OMAP2_PBIASLITEVMODE0);
omap_ctrl_writel(reg, control_pbias_offset);
}
}
static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (mmc->remux)
mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
return 0;
}
static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
*mmc_controller, int controller_nr)
{
if (gpio_is_valid(mmc_controller->gpio_cd) &&
(mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->gpio_cd,
OMAP_PIN_INPUT_PULLUP);
if (gpio_is_valid(mmc_controller->gpio_cod) &&
(mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->gpio_cod,
OMAP_PIN_INPUT_PULLUP);
if (gpio_is_valid(mmc_controller->gpio_wp) &&
(mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}
if (controller_nr == 1) {
/* MMC2 */
omap_mux_init_signal("sdmmc2_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat0",
OMAP_PIN_INPUT_PULLUP);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
* need to be muxed in the board-*.c files
*/
if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}
/*
* For MMC3 the pins need to be muxed in the board-*.c files
*/
}
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
struct omap_hsmmc_platform_data *mmc)
{
char *hc_name;
hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL);
if (!hc_name) {
pr_err("Cannot allocate memory for controller slot name\n");
kfree(hc_name);
return -ENOMEM;
}
if (c->name)
strncpy(hc_name, c->name, HSMMC_NAME_LEN);
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
mmc->name = hc_name;
mmc->caps = c->caps;
mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
if (c->cover_only) {
/* detect if mobile phone cover removed */
mmc->gpio_cd = -EINVAL;
mmc->gpio_cod = c->gpio_cd;
} else {
/* card detect pin on the mmc socket itself */
mmc->gpio_cd = c->gpio_cd;
mmc->gpio_cod = -EINVAL;
}
mmc->gpio_wp = c->gpio_wp;
mmc->remux = c->remux;
mmc->init_card = c->init_card;
if (c->nonremovable)
mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
* This may be from a TWL4030-family chip, another
* controllable regulator, or a fixed supply.
*
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
mmc->before_set_reg = hsmmc2_before_set_reg;
mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
mmc->before_set_reg = NULL;
mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
kfree(hc_name);
return -ENODEV;
}
return 0;
}
static int omap_hsmmc_done;
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
return;
omap_hsmmc_done++;
for (; c->mmc; c++) {
if (!c->deferred)
continue;
pdev = c->pdev;
if (!pdev)
continue;
mmc_pdata = pdev->dev.platform_data;
if (!mmc_pdata)
continue;
if (c->cover_only) {
/* detect if mobile phone cover removed */
mmc_pdata->gpio_cd = -EINVAL;
mmc_pdata->gpio_cod = c->gpio_cd;
} else {
/* card detect pin on the mmc socket itself */
mmc_pdata->gpio_cd = c->gpio_cd;
mmc_pdata->gpio_cod = -EINVAL;
}
mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
pr_err("Could not late init MMC %s\n",
c->name);
}
}
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
int ctrl_nr)
{
struct omap_hwmod *oh;
struct omap_hwmod *ohs[1];
struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_hsmmc_platform_data *mmc_data;
struct omap_hsmmc_dev_attr *mmc_dev_attr;
char *name;
int res;
mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
}
res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
if (res < 0)
goto free_mmc;
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
"String buffer overflow in MMC%d device setup\n", ctrl_nr);
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
goto free_name;
}
ohs[0] = oh;
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
/*
* erratum 2.1.1.128 doesn't apply if board has
* a transceiver is attached
*/
if (hsmmcinfo->transceiver)
mmc_data->controller_flags &=
~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
}
pdev = platform_device_alloc(name, ctrl_nr - 1);
if (!pdev) {
pr_err("Could not allocate pdev for %s\n", name);
goto free_name;
}
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
od = omap_device_alloc(pdev, ohs, 1);
if (IS_ERR(od)) {
pr_err("Could not allocate od for %s\n", name);
goto put_pdev;
}
res = platform_device_add_data(pdev, mmc_data,
sizeof(struct omap_hsmmc_platform_data));
if (res) {
pr_err("Could not add pdata for %s\n", name);
goto put_pdev;
}
hsmmcinfo->pdev = pdev;
if (hsmmcinfo->deferred)
goto free_mmc;
res = omap_device_register(pdev);
if (res) {
pr_err("Could not register od for %s\n", name);
goto free_od;
}
goto free_mmc;
free_od:
omap_device_delete(od);
put_pdev:
platform_device_put(pdev);
free_name:
kfree(mmc_data->name);
free_mmc:
kfree(mmc_data);
}
void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
if (omap_hsmmc_done)
return;
omap_hsmmc_done = 1;
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
} else {
control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
}
for (; controllers->mmc; controllers++)
omap_hsmmc_init_one(controllers, controllers->mmc);
}
#endif
View Git Blame Copy Permalink