Wei Yongjun fa4c115ca5 iio: common: ssp_sensors: accel: use devm_iio_device_register() ... Use devm_iio_device_register() for IIO subsystem device registration and delete the remove function since there is no need after this change. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-01-28 12:15:22 +00:00
..
accel	iio: common: ssp_sensors: accel: use devm_iio_device_register()	2017-01-28 12:15:22 +00:00
adc	iio: adc: Add Renesas GyroADC driver	2017-01-28 11:33:53 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	First round of new device support, features and cleanups for IIO in the 4.11 cycle.	2017-01-19 10:40:44 +01:00
counter	iio: 104-quad-8: Fix active level mismatch for the preset enable option	2016-12-03 10:08:09 +00:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
health	iio: health: max30100: use msleep() for long uncritical delays	2017-01-22 13:21:28 +00:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	Second round of IIO new device support, cleanups and features for the 4.11 cycle	2017-01-23 09:23:23 +01:00
light	Second round of IIO new device support, cleanups and features for the 4.11 cycle	2017-01-23 09:23:23 +01:00
magnetometer	iio: magnetometer: mag3110: claim direct mode during raw writes	2017-01-21 12:20:40 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: pressure: ms5611: claim direct mode during oversampling changes	2017-01-21 12:31:05 +00:00
proximity	iio: proximity: sx9500: claim direct mode during raw proximity reads	2017-01-21 12:21:53 +00:00
temperature	iio:temperature: Add support for TI TMP007 sensor	2017-01-14 10:45:05 +00:00
trigger	Second round of IIO new device support, cleanups and features for the 4.11 cycle	2017-01-23 09:23:23 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00