mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
4fb2847437
Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
427 lines
11 KiB
ArmAsm
427 lines
11 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
|
|
*
|
|
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
|
|
*
|
|
* (Many of cache codes are from proc-arm926.S)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
|
|
* comprising 256 lines of 32 bytes (8 words).
|
|
*/
|
|
#define CACHE_DSIZE (CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
|
|
#define CACHE_DLINESIZE 32 /* fixed */
|
|
#define CACHE_DSEGMENTS 4 /* fixed */
|
|
#define CACHE_DENTRIES (CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
|
|
#define CACHE_DLIMIT (CACHE_DSIZE * 4) /* benchmark needed */
|
|
|
|
.text
|
|
/*
|
|
* cpu_arm946_proc_init()
|
|
* cpu_arm946_switch_mm()
|
|
*
|
|
* These are not required.
|
|
*/
|
|
ENTRY(cpu_arm946_proc_init)
|
|
ENTRY(cpu_arm946_switch_mm)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm946_proc_fin()
|
|
*/
|
|
ENTRY(cpu_arm946_proc_fin)
|
|
stmfd sp!, {lr}
|
|
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
|
|
msr cpsr_c, ip
|
|
bl arm946_flush_kern_cache_all
|
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
|
bic r0, r0, #0x00001000 @ i-cache
|
|
bic r0, r0, #0x00000004 @ d-cache
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
ldmfd sp!, {pc}
|
|
|
|
/*
|
|
* cpu_arm946_reset(loc)
|
|
* Params : r0 = address to jump to
|
|
* Notes : This sets up everything for a reset
|
|
*/
|
|
ENTRY(cpu_arm946_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
bic ip, ip, #0x00000005 @ .............c.p
|
|
bic ip, ip, #0x00001000 @ i-cache
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
|
|
/*
|
|
* cpu_arm946_do_idle()
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm946_do_idle)
|
|
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_user_cache_all()
|
|
*/
|
|
ENTRY(arm946_flush_user_cache_all)
|
|
/* FALLTHROUGH */
|
|
|
|
/*
|
|
* flush_kern_cache_all()
|
|
*
|
|
* Clean and invalidate the entire cache.
|
|
*/
|
|
ENTRY(arm946_flush_kern_cache_all)
|
|
mov r2, #VM_EXEC
|
|
mov ip, #0
|
|
__flush_whole_cache:
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
|
|
#else
|
|
mov r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
|
|
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
|
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
|
|
subs r3, r3, #1 << 4
|
|
bcs 2b @ entries n to 0
|
|
subs r1, r1, #1 << 29
|
|
bcs 1b @ segments 3 to 0
|
|
#endif
|
|
tst r2, #VM_EXEC
|
|
mcrne p15, 0, ip, c7, c5, 0 @ flush I cache
|
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_user_cache_range(start, end, flags)
|
|
*
|
|
* Clean and invalidate a range of cache entries in the
|
|
* specified address range.
|
|
*
|
|
* - start - start address (inclusive)
|
|
* - end - end address (exclusive)
|
|
* - flags - vm_flags describing address space
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_flush_user_cache_range)
|
|
mov ip, #0
|
|
sub r3, r1, r0 @ calculate total size
|
|
cmp r3, #CACHE_DLIMIT
|
|
bhs __flush_whole_cache
|
|
|
|
1: tst r2, #VM_EXEC
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
#else
|
|
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
|
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
|
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
#endif
|
|
cmp r0, r1
|
|
blo 1b
|
|
tst r2, #VM_EXEC
|
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* coherent_kern_range(start, end)
|
|
*
|
|
* Ensure coherency between the Icache and the Dcache in the
|
|
* region described by start, end. If you have non-snooping
|
|
* Harvard caches, you need to implement this function.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(arm946_coherent_kern_range)
|
|
/* FALLTHROUGH */
|
|
|
|
/*
|
|
* coherent_user_range(start, end)
|
|
*
|
|
* Ensure coherency between the Icache and the Dcache in the
|
|
* region described by start, end. If you have non-snooping
|
|
* Harvard caches, you need to implement this function.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_coherent_user_range)
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_kern_dcache_page(void *page)
|
|
*
|
|
* Ensure no D cache aliasing occurs, either with itself or
|
|
* the I cache
|
|
*
|
|
* - addr - page aligned address
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_flush_kern_dcache_page)
|
|
add r1, r0, #PAGE_SZ
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_inv_range(start, end)
|
|
*
|
|
* Invalidate (discard) the specified virtual address range.
|
|
* May not write back any entries. If 'start' or 'end'
|
|
* are not cache line aligned, those lines must be written
|
|
* back.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_dma_inv_range)
|
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
tst r0, #CACHE_DLINESIZE - 1
|
|
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
tst r1, #CACHE_DLINESIZE - 1
|
|
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
|
|
#endif
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_clean_range(start, end)
|
|
*
|
|
* Clean the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_dma_clean_range)
|
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_flush_range(start, end)
|
|
*
|
|
* Clean and invalidate the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*
|
|
* (same as arm926)
|
|
*/
|
|
ENTRY(arm946_dma_flush_range)
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1:
|
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
|
#else
|
|
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
|
#endif
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
ENTRY(arm946_cache_fns)
|
|
.long arm946_flush_kern_cache_all
|
|
.long arm946_flush_user_cache_all
|
|
.long arm946_flush_user_cache_range
|
|
.long arm946_coherent_kern_range
|
|
.long arm946_coherent_user_range
|
|
.long arm946_flush_kern_dcache_page
|
|
.long arm946_dma_inv_range
|
|
.long arm946_dma_clean_range
|
|
.long arm946_dma_flush_range
|
|
|
|
|
|
ENTRY(cpu_arm946_dcache_clean_area)
|
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
subs r1, r1, #CACHE_DLINESIZE
|
|
bhi 1b
|
|
#endif
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__INIT
|
|
|
|
.type __arm946_setup, #function
|
|
__arm946_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
|
|
mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
|
|
mcr p15, 0, r0, c6, c3, 0 @ disable memory region 3~7
|
|
mcr p15, 0, r0, c6, c4, 0
|
|
mcr p15, 0, r0, c6, c5, 0
|
|
mcr p15, 0, r0, c6, c6, 0
|
|
mcr p15, 0, r0, c6, c7, 0
|
|
|
|
mov r0, #0x0000003F @ base = 0, size = 4GB
|
|
mcr p15, 0, r0, c6, c0, 0 @ set region 0, default
|
|
|
|
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
|
|
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
|
|
mov r2, #10 @ 11 is the minimum (4KB)
|
|
1: add r2, r2, #1 @ area size *= 2
|
|
mov r1, r1, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r2, lsl #1 @ the region register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM
|
|
|
|
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
|
|
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
|
|
mov r2, #10 @ 11 is the minimum (4KB)
|
|
1: add r2, r2, #1 @ area size *= 2
|
|
mov r1, r1, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r2, lsl #1 @ the region register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH
|
|
|
|
mov r0, #0x06
|
|
mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable
|
|
mcr p15, 0, r0, c2, c0, 1 @ region 1,2 i-cacheable
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mov r0, #0x00 @ disable whole write buffer
|
|
#else
|
|
mov r0, #0x02 @ region 1 write bufferred
|
|
#endif
|
|
mcr p15, 0, r0, c3, c0, 0
|
|
|
|
/*
|
|
* Access Permission Settings for future permission control by PU.
|
|
*
|
|
* priv. user
|
|
* region 0 (whole) rw -- : b0001
|
|
* region 1 (RAM) rw rw : b0011
|
|
* region 2 (FLASH) rw r- : b0010
|
|
* region 3~7 (none) -- -- : b0000
|
|
*/
|
|
mov r0, #0x00000031
|
|
orr r0, r0, #0x00000200
|
|
mcr p15, 0, r0, c5, c0, 2 @ set data access permission
|
|
mcr p15, 0, r0, c5, c0, 3 @ set inst. access permission
|
|
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
orr r0, r0, #0x00001000 @ I-cache
|
|
orr r0, r0, #0x00000005 @ MPU/D-cache
|
|
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
|
|
orr r0, r0, #0x00004000 @ .1.. .... .... ....
|
|
#endif
|
|
mov pc, lr
|
|
|
|
.size __arm946_setup, . - __arm946_setup
|
|
|
|
__INITDATA
|
|
|
|
/*
|
|
* Purpose : Function pointers used to access above functions - all calls
|
|
* come through these
|
|
*/
|
|
.type arm946_processor_functions, #object
|
|
ENTRY(arm946_processor_functions)
|
|
.word nommu_early_abort
|
|
.word legacy_pabort
|
|
.word cpu_arm946_proc_init
|
|
.word cpu_arm946_proc_fin
|
|
.word cpu_arm946_reset
|
|
.word cpu_arm946_do_idle
|
|
|
|
.word cpu_arm946_dcache_clean_area
|
|
.word cpu_arm946_switch_mm
|
|
.word 0 @ cpu_*_set_pte
|
|
.size arm946_processor_functions, . - arm946_processor_functions
|
|
|
|
.section ".rodata"
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv5te"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v5t"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
|
|
.type cpu_arm946_name, #object
|
|
cpu_arm946_name:
|
|
.ascii "ARM946E-S"
|
|
.size cpu_arm946_name, . - cpu_arm946_name
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
.type __arm946_proc_info,#object
|
|
__arm946_proc_info:
|
|
.long 0x41009460
|
|
.long 0xff00fff0
|
|
.long 0
|
|
b __arm946_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
|
|
.long cpu_arm946_name
|
|
.long arm946_processor_functions
|
|
.long 0
|
|
.long 0
|
|
.long arm940_cache_fns
|
|
.size __arm946_proc_info, . - __arm946_proc_info
|
|
|