mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
4fb2847437
Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.
Now we have three prefetch abort model:
* legacy - for CPUs before ARMv6. They doesn't provide neither
IFSR nor IFAR. We simulate IFSR with section translation fault
status for them to generalize code;
* ARMv6 - provides IFSR, but not IFAR;
* ARMv7 - provides both IFSR and IFAR.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
176 lines
4.4 KiB
ArmAsm
176 lines
4.4 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/arm740.S: utility functions for ARM740
|
|
*
|
|
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
.text
|
|
/*
|
|
* cpu_arm740_proc_init()
|
|
* cpu_arm740_do_idle()
|
|
* cpu_arm740_dcache_clean_area()
|
|
* cpu_arm740_switch_mm()
|
|
*
|
|
* These are not required.
|
|
*/
|
|
ENTRY(cpu_arm740_proc_init)
|
|
ENTRY(cpu_arm740_do_idle)
|
|
ENTRY(cpu_arm740_dcache_clean_area)
|
|
ENTRY(cpu_arm740_switch_mm)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm740_proc_fin()
|
|
*/
|
|
ENTRY(cpu_arm740_proc_fin)
|
|
stmfd sp!, {lr}
|
|
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
|
|
msr cpsr_c, ip
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x3f000000 @ bank/f/lock/s
|
|
bic r0, r0, #0x0000000c @ w-buffer/cache
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate cache
|
|
ldmfd sp!, {pc}
|
|
|
|
/*
|
|
* cpu_arm740_reset(loc)
|
|
* Params : r0 = address to jump to
|
|
* Notes : This sets up everything for a reset
|
|
*/
|
|
ENTRY(cpu_arm740_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
|
|
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
|
|
bic ip, ip, #0x0000000c @ ............wc..
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
|
|
__INIT
|
|
|
|
.type __arm740_setup, #function
|
|
__arm740_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate caches
|
|
|
|
mcr p15, 0, r0, c6, c3 @ disable area 3~7
|
|
mcr p15, 0, r0, c6, c4
|
|
mcr p15, 0, r0, c6, c5
|
|
mcr p15, 0, r0, c6, c6
|
|
mcr p15, 0, r0, c6, c7
|
|
|
|
mov r0, #0x0000003F @ base = 0, size = 4GB
|
|
mcr p15, 0, r0, c6, c0 @ set area 0, default
|
|
|
|
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
|
|
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
|
|
mov r2, #10 @ 11 is the minimum (4KB)
|
|
1: add r2, r2, #1 @ area size *= 2
|
|
mov r1, r1, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r2, lsl #1 @ the area register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
|
|
|
|
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
|
|
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
|
|
mov r2, #10 @ 11 is the minimum (4KB)
|
|
1: add r2, r2, #1 @ area size *= 2
|
|
mov r1, r1, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r2, lsl #1 @ the area register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
|
|
|
|
mov r0, #0x06
|
|
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mov r0, #0x00 @ disable whole write buffer
|
|
#else
|
|
mov r0, #0x02 @ Region 1 write bufferred
|
|
#endif
|
|
mcr p15, 0, r0, c3, c0
|
|
|
|
mov r0, #0x10000
|
|
sub r0, r0, #1 @ r0 = 0xffff
|
|
mcr p15, 0, r0, c5, c0 @ all read/write access
|
|
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
bic r0, r0, #0x3F000000 @ set to standard caching mode
|
|
@ need some benchmark
|
|
orr r0, r0, #0x0000000d @ MPU/Cache/WB
|
|
|
|
mov pc, lr
|
|
|
|
.size __arm740_setup, . - __arm740_setup
|
|
|
|
__INITDATA
|
|
|
|
/*
|
|
* Purpose : Function pointers used to access above functions - all calls
|
|
* come through these
|
|
*/
|
|
.type arm740_processor_functions, #object
|
|
ENTRY(arm740_processor_functions)
|
|
.word v4t_late_abort
|
|
.word legacy_pabort
|
|
.word cpu_arm740_proc_init
|
|
.word cpu_arm740_proc_fin
|
|
.word cpu_arm740_reset
|
|
.word cpu_arm740_do_idle
|
|
.word cpu_arm740_dcache_clean_area
|
|
.word cpu_arm740_switch_mm
|
|
.word 0 @ cpu_*_set_pte
|
|
.size arm740_processor_functions, . - arm740_processor_functions
|
|
|
|
.section ".rodata"
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv4"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v4"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
|
|
.type cpu_arm740_name, #object
|
|
cpu_arm740_name:
|
|
.ascii "ARM740T"
|
|
.size cpu_arm740_name, . - cpu_arm740_name
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
.type __arm740_proc_info,#object
|
|
__arm740_proc_info:
|
|
.long 0x41807400
|
|
.long 0xfffffff0
|
|
.long 0
|
|
b __arm740_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
|
|
.long cpu_arm740_name
|
|
.long arm740_processor_functions
|
|
.long 0
|
|
.long 0
|
|
.long v3_cache_fns @ cache model
|
|
.size __arm740_proc_info, . - __arm740_proc_info
|
|
|
|
|