mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 23:23:55 +08:00
726b6324e3
This patch provides a simple mmc-pwrseq-emmc driver, which controls single gpio line. It perform standard eMMC hw reset procedure, as descibed by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in case of emergency reboot call). The latter is needed on boards, which doesn't have hardware reset logic connected to emmc card and (limited or broken) ROM bootloaders are unable to read second stage from the emmc card if the card is left in unknown or already initialized state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
13 lines
364 B
Makefile
13 lines
364 B
Makefile
#
|
|
# Makefile for the kernel mmc core.
|
|
#
|
|
|
|
obj-$(CONFIG_MMC) += mmc_core.o
|
|
mmc_core-y := core.o bus.o host.o \
|
|
mmc.o mmc_ops.o sd.o sd_ops.o \
|
|
sdio.o sdio_ops.o sdio_bus.o \
|
|
sdio_cis.o sdio_io.o sdio_irq.o \
|
|
quirks.o slot-gpio.o
|
|
mmc_core-$(CONFIG_OF) += pwrseq.o pwrseq_simple.o pwrseq_emmc.o
|
|
mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
|