renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
Code
f997ee2137
linux-next/arch/arc/kernel/entry.S
Vineet Gupta 541366da6a ARC: [arcompact] Handle bus error from userspace as Interrupt not exception 
Bus errors from userspace on ARCompact based cores are handled by core
as a high priority L2 interrupt but current code treated it as interrupt
Handling an interrupt like exception is certainly not going to go unnoticed.
(and it worked so far as we never saw a Bus error from userspace until
IPPK guys tested a DDR controller with ECC error detection etc hence
needed to explicitly trigger/handle such errors)

 - So move mem_service exception handler from common code into ARCv2 code.
 - In ARCompact code, define  mem_service as L2 interrupt handler which
   just drops down to pure kernel mode and goes of to enqueue SIGBUS

Reported-by: Nelson Pereira <npereira@synopsys.com>
Tested-by: Ana Martins <amartins@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14 13:12:20 +05:30

376 lines
10 KiB
ArmAsm
Raw Blame History

/*
* Common Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARC
* (included from entry-<isa>.S
*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*------------------------------------------------------------------
* Function ABI
*------------------------------------------------------------------
*
* Arguments r0 - r7
* Caller Saved Registers r0 - r12
* Callee Saved Registers r13- r25
* Global Pointer (gp) r26
* Frame Pointer (fp) r27
* Stack Pointer (sp) r28
* Branch link register (blink) r31
*------------------------------------------------------------------
*/
;################### Special Sys Call Wrappers ##########################
ENTRY(sys_clone_wrapper)
SAVE_CALLEE_SAVED_USER
bl @sys_clone
DISCARD_CALLEE_SAVED_USER
GET_CURR_THR_INFO_FLAGS r10
btst r10, TIF_SYSCALL_TRACE
bnz tracesys_exit
b ret_from_system_call
END(sys_clone_wrapper)
ENTRY(ret_from_fork)
; when the forked child comes here from the __switch_to function
; r0 has the last task pointer.
; put last task in scheduler queue
jl @schedule_tail
ld r9, [sp, PT_status32]
brne r9, 0, 1f
jl.d [r14] ; kernel thread entry point
mov r0, r13 ; (see PF_KTHREAD block in copy_thread)
1:
; Return to user space
; 1. Any forked task (Reach here via BRne above)
; 2. First ever init task (Reach here via return from JL above)
; This is the historic "kernel_execve" use-case, to return to init
; user mode, in a round about way since that is always done from
; a kernel thread which is executed via JL above but always returns
; out whenever kernel_execve (now inline do_fork()) is involved
b ret_from_exception
END(ret_from_fork)
#ifdef CONFIG_ARC_DW2_UNWIND
; Workaround for bug 94179 (STAR ):
; Despite -fasynchronous-unwind-tables, linker is not making dwarf2 unwinder
; section (.debug_frame) as loadable. So we force it here.
; This also fixes STAR 9000487933 where the prev-workaround (objcopy --setflag)
; would not work after a clean build due to kernel build system dependencies.
.section .debug_frame, "wa",@progbits
; Reset to .text as this file is included in entry-<isa>.S
.section .text, "ax",@progbits
#endif
;################### Non TLB Exception Handling #############################
; ---------------------------------------------
; Instruction Error Exception Handler
; ---------------------------------------------
ENTRY(instr_service)
EXCEPTION_PROLOGUE
lr r0, [efa]
mov r1, sp
FAKE_RET_FROM_EXCPN
bl do_insterror_or_kprobe
b ret_from_exception
END(instr_service)
; ---------------------------------------------
; Machine Check Exception Handler
; ---------------------------------------------
ENTRY(EV_MachineCheck)
EXCEPTION_PROLOGUE
lr r2, [ecr]
lr r0, [efa]
mov r1, sp
lsr r3, r2, 8
bmsk r3, r3, 7
brne r3, ECR_C_MCHK_DUP_TLB, 1f
bl do_tlb_overlap_fault
b ret_from_exception
1:
; DEAD END: can't do much, display Regs and HALT
SAVE_CALLEE_SAVED_USER
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10
st sp, [r10, THREAD_CALLEE_REG]
j do_machine_check_fault
END(EV_MachineCheck)
; ---------------------------------------------
; Privilege Violation Exception Handler
; ---------------------------------------------
ENTRY(EV_PrivilegeV)
EXCEPTION_PROLOGUE
lr r0, [efa]
mov r1, sp
FAKE_RET_FROM_EXCPN
bl do_privilege_fault
b ret_from_exception
END(EV_PrivilegeV)
; ---------------------------------------------
; Extension Instruction Exception Handler
; ---------------------------------------------
ENTRY(EV_Extension)
EXCEPTION_PROLOGUE
lr r0, [efa]
mov r1, sp
FAKE_RET_FROM_EXCPN
bl do_extension_fault
b ret_from_exception
END(EV_Extension)
;################ Trap Handling (Syscall, Breakpoint) ##################
; ---------------------------------------------
; syscall Tracing
; ---------------------------------------------
tracesys:
; save EFA in case tracer wants the PC of traced task
; using ERET won't work since next-PC has already committed
lr r12, [efa]
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11
st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address
; PRE Sys Call Ptrace hook
mov r0, sp ; pt_regs needed
bl @syscall_trace_entry
; Tracing code now returns the syscall num (orig or modif)
mov r8, r0
; Do the Sys Call as we normally would.
; Validate the Sys Call number
cmp r8, NR_syscalls
mov.hi r0, -ENOSYS
bhi tracesys_exit
; Restore the sys-call args. Mere invocation of the hook abv could have
; clobbered them (since they are in scratch regs). The tracer could also
; have deliberately changed the syscall args: r0-r7
ld r0, [sp, PT_r0]
ld r1, [sp, PT_r1]
ld r2, [sp, PT_r2]
ld r3, [sp, PT_r3]
ld r4, [sp, PT_r4]
ld r5, [sp, PT_r5]
ld r6, [sp, PT_r6]
ld r7, [sp, PT_r7]
ld.as r9, [sys_call_table, r8]
jl [r9] ; Entry into Sys Call Handler
tracesys_exit:
st r0, [sp, PT_r0] ; sys call return value in pt_regs
;POST Sys Call Ptrace Hook
bl @syscall_trace_exit
b ret_from_exception ; NOT ret_from_system_call at is saves r0 which
; we'd done before calling post hook above
; ---------------------------------------------
; Breakpoint TRAP
; ---------------------------------------------
trap_with_param:
; stop_pc info by gdb needs this info
lr r0, [efa]
mov r1, sp
; Now that we have read EFA, it is safe to do "fake" rtie
; and get out of CPU exception mode
FAKE_RET_FROM_EXCPN
; Save callee regs in case gdb wants to have a look
; SP will grow up by size of CALLEE Reg-File
; NOTE: clobbers r12
SAVE_CALLEE_SAVED_USER
; save location of saved Callee Regs @ thread_struct->pc
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10
st sp, [r10, THREAD_CALLEE_REG]
; Call the trap handler
bl do_non_swi_trap
; unwind stack to discard Callee saved Regs
DISCARD_CALLEE_SAVED_USER
b ret_from_exception
; ---------------------------------------------
; syscall TRAP
; ABI: (r0-r7) upto 8 args, (r8) syscall number
; ---------------------------------------------
ENTRY(EV_Trap)
EXCEPTION_PROLOGUE
;============ TRAP 1 :breakpoints
; Check ECR for trap with arg (PROLOGUE ensures r9 has ECR)
bmsk.f 0, r9, 7
bnz trap_with_param
;============ TRAP (no param): syscall top level
; First return from Exception to pure K mode (Exception/IRQs renabled)
FAKE_RET_FROM_EXCPN
; If syscall tracing ongoing, invoke pre-post-hooks
GET_CURR_THR_INFO_FLAGS r10
btst r10, TIF_SYSCALL_TRACE
bnz tracesys ; this never comes back
;============ Normal syscall case
; syscall num shd not exceed the total system calls avail
cmp r8, NR_syscalls
mov.hi r0, -ENOSYS
bhi ret_from_system_call
; Offset into the syscall_table and call handler
ld.as r9,[sys_call_table, r8]
jl [r9] ; Entry into Sys Call Handler
; fall through to ret_from_system_call
END(EV_Trap)
ENTRY(ret_from_system_call)
st r0, [sp, PT_r0] ; sys call return value in pt_regs
; fall through yet again to ret_from_exception
;############# Return from Intr/Excp/Trap (Linux Specifics) ##############
;
; If ret to user mode do we need to handle signals, schedule() et al.
ENTRY(ret_from_exception)
; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32
ld r8, [sp, PT_status32] ; returning to User/Kernel Mode
bbit0 r8, STATUS_U_BIT, resume_kernel_mode
; Before returning to User mode check-for-and-complete any pending work
; such as rescheduling/signal-delivery etc.
resume_user_mode_begin:
; Disable IRQs to ensures that chk for pending work itself is atomic
; (and we don't end up missing a NEED_RESCHED/SIGPENDING due to an
; interim IRQ).
IRQ_DISABLE r10
; Fast Path return to user mode if no pending work
GET_CURR_THR_INFO_FLAGS r9
and.f 0, r9, _TIF_WORK_MASK
bz .Lrestore_regs
; --- (Slow Path #1) task preemption ---
bbit0 r9, TIF_NEED_RESCHED, .Lchk_pend_signals
mov blink, resume_user_mode_begin ; tail-call to U mode ret chks
j @schedule ; BTST+Bnz causes relo error in link
.Lchk_pend_signals:
IRQ_ENABLE r10
; --- (Slow Path #2) pending signal ---
mov r0, sp ; pt_regs for arg to do_signal()/do_notify_resume()
GET_CURR_THR_INFO_FLAGS r9
bbit0 r9, TIF_SIGPENDING, .Lchk_notify_resume
; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs
; in pt_reg since the "C" ABI (kernel code) will automatically
; save/restore callee-saved regs.
;
; However, here we need to explicitly save callee regs because
; (i) If this signal causes coredump - full regfile needed
; (ii) If signal is SIGTRAP/SIGSTOP, task is being traced thus
; tracer might call PEEKUSR(CALLEE reg)
;
; NOTE: SP will grow up by size of CALLEE Reg-File
SAVE_CALLEE_SAVED_USER ; clobbers r12
; save location of saved Callee Regs @ thread_struct->callee
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10
st sp, [r10, THREAD_CALLEE_REG]
bl @do_signal
; Ideally we want to discard the Callee reg above, however if this was
; a tracing signal, tracer could have done a POKEUSR(CALLEE reg)
RESTORE_CALLEE_SAVED_USER
b resume_user_mode_begin ; loop back to start of U mode ret
; --- (Slow Path #3) notify_resume ---
.Lchk_notify_resume:
btst r9, TIF_NOTIFY_RESUME
blnz @do_notify_resume
b resume_user_mode_begin ; unconditionally back to U mode ret chks
; for single exit point from this block
resume_kernel_mode:
; Disable Interrupts from this point on
; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
IRQ_DISABLE r9
#ifdef CONFIG_PREEMPT
; Can't preempt if preemption disabled
GET_CURR_THR_INFO_FROM_SP r10
ld r8, [r10, THREAD_INFO_PREEMPT_COUNT]
brne r8, 0, .Lrestore_regs
; check if this task's NEED_RESCHED flag set
ld r9, [r10, THREAD_INFO_FLAGS]
bbit0 r9, TIF_NEED_RESCHED, .Lrestore_regs
; Invoke PREEMPTION
jl preempt_schedule_irq
; preempt_schedule_irq() always returns with IRQ disabled
#endif
b .Lrestore_regs
##### DONT ADD CODE HERE - .Lrestore_regs actually follows in entry-<isa>.S
View Git Blame Copy Permalink