2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/arch/arm/lib/getuser.S
Vincent Whitchurch 344eb5539a ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
getuser() and putuser() (and there underscored variants) use two
strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits.
This means that the read/write is not atomic even when performed to a
16-bit-aligned address.

This leads to problems with vhost: vhost uses __getuser() to read the
vring's 16-bit avail.index field, and if it happens to observe a partial
update of the index, wrong descriptors will be used which will lead to a
breakdown of the virtio communication.  A similar problem exists for
__putuser() which is used to write to the vring's used.index field.

The reason these functions use strb[t]/ldrb[t] is because strht/ldrht
instructions did not exist until ARMv6T2/ARMv7.  So we should be easily
able to fix this on ARMv7.  Also, since all ARMv6 processors also don't
actually use the unprivileged instructions anymore for uaccess (since
CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-11-12 10:52:04 +00:00

171 lines
3.5 KiB
ArmAsm

/*
* linux/arch/arm/lib/getuser.S
*
* Copyright (C) 2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Idea from x86 version, (C) Copyright 1998 Linus Torvalds
*
* These functions have a non-standard call interface to make them more
* efficient, especially as they return an error value in addition to
* the "real" return value.
*
* __get_user_X
*
* Inputs: r0 contains the address
* r1 contains the address limit, which must be preserved
* Outputs: r0 is the error code
* r2, r3 contains the zero-extended value
* lr corrupted
*
* No other registers must be altered. (see <asm/uaccess.h>
* for specific ASM register usage).
*
* Note that ADDR_LIMIT is either 0 or 0xc0000000.
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
check_uaccess r0, 1, r1, r2, __get_user_bad
1: TUSER(ldrb) r2, [r0]
mov r0, #0
ret lr
ENDPROC(__get_user_1)
_ASM_NOKPROBE(__get_user_1)
ENTRY(__get_user_2)
check_uaccess r0, 2, r1, r2, __get_user_bad
#if __LINUX_ARM_ARCH__ >= 6
2: TUSER(ldrh) r2, [r0]
#else
#ifdef CONFIG_CPU_USE_DOMAINS
rb .req ip
2: ldrbt r2, [r0], #1
3: ldrbt rb, [r0], #0
#else
rb .req r0
2: ldrb r2, [r0]
3: ldrb rb, [r0, #1]
#endif
#ifndef __ARMEB__
orr r2, r2, rb, lsl #8
#else
orr r2, rb, r2, lsl #8
#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
mov r0, #0
ret lr
ENDPROC(__get_user_2)
_ASM_NOKPROBE(__get_user_2)
ENTRY(__get_user_4)
check_uaccess r0, 4, r1, r2, __get_user_bad
4: TUSER(ldr) r2, [r0]
mov r0, #0
ret lr
ENDPROC(__get_user_4)
_ASM_NOKPROBE(__get_user_4)
ENTRY(__get_user_8)
check_uaccess r0, 8, r1, r2, __get_user_bad8
#ifdef CONFIG_THUMB2_KERNEL
5: TUSER(ldr) r2, [r0]
6: TUSER(ldr) r3, [r0, #4]
#else
5: TUSER(ldr) r2, [r0], #4
6: TUSER(ldr) r3, [r0]
#endif
mov r0, #0
ret lr
ENDPROC(__get_user_8)
_ASM_NOKPROBE(__get_user_8)
#ifdef __ARMEB__
ENTRY(__get_user_32t_8)
check_uaccess r0, 8, r1, r2, __get_user_bad
#ifdef CONFIG_CPU_USE_DOMAINS
add r0, r0, #4
7: ldrt r2, [r0]
#else
7: ldr r2, [r0, #4]
#endif
mov r0, #0
ret lr
ENDPROC(__get_user_32t_8)
_ASM_NOKPROBE(__get_user_32t_8)
ENTRY(__get_user_64t_1)
check_uaccess r0, 1, r1, r2, __get_user_bad8
8: TUSER(ldrb) r3, [r0]
mov r0, #0
ret lr
ENDPROC(__get_user_64t_1)
_ASM_NOKPROBE(__get_user_64t_1)
ENTRY(__get_user_64t_2)
check_uaccess r0, 2, r1, r2, __get_user_bad8
#ifdef CONFIG_CPU_USE_DOMAINS
rb .req ip
9: ldrbt r3, [r0], #1
10: ldrbt rb, [r0], #0
#else
rb .req r0
9: ldrb r3, [r0]
10: ldrb rb, [r0, #1]
#endif
orr r3, rb, r3, lsl #8
mov r0, #0
ret lr
ENDPROC(__get_user_64t_2)
_ASM_NOKPROBE(__get_user_64t_2)
ENTRY(__get_user_64t_4)
check_uaccess r0, 4, r1, r2, __get_user_bad8
11: TUSER(ldr) r3, [r0]
mov r0, #0
ret lr
ENDPROC(__get_user_64t_4)
_ASM_NOKPROBE(__get_user_64t_4)
#endif
__get_user_bad8:
mov r3, #0
__get_user_bad:
mov r2, #0
mov r0, #-EFAULT
ret lr
ENDPROC(__get_user_bad)
ENDPROC(__get_user_bad8)
_ASM_NOKPROBE(__get_user_bad)
_ASM_NOKPROBE(__get_user_bad8)
.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
#if __LINUX_ARM_ARCH__ < 6
.long 3b, __get_user_bad
#endif
.long 4b, __get_user_bad
.long 5b, __get_user_bad8
.long 6b, __get_user_bad8
#ifdef __ARMEB__
.long 7b, __get_user_bad
.long 8b, __get_user_bad8
.long 9b, __get_user_bad8
.long 10b, __get_user_bad8
.long 11b, __get_user_bad8
#endif
.popsection