mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
72f0271576
Add i2c-mux-idle-disconnect device tree property to PCA954x mux driver. The new property forces the multiplexer to disconnect child buses in idle state. This is used, for example, when there are several multiplexers on the same bus and the devices on the underlying buses might have same I2C addresses. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> [wsa: added a newline] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
54 lines
1.2 KiB
Plaintext
54 lines
1.2 KiB
Plaintext
* NXP PCA954x I2C bus switch
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must contain one of the following.
|
|
"nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544",
|
|
"nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548"
|
|
|
|
- reg: The I2C address of the device.
|
|
|
|
The following required properties are defined externally:
|
|
|
|
- Standard I2C mux properties. See i2c-mux.txt in this directory.
|
|
- I2C child bus nodes. See i2c-mux.txt in this directory.
|
|
|
|
Optional Properties:
|
|
|
|
- reset-gpios: Reference to the GPIO connected to the reset input.
|
|
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
|
|
children in idle state. This is necessary for example, if there are several
|
|
multiplexers on the bus and the devices behind them use same I2C addresses.
|
|
|
|
|
|
Example:
|
|
|
|
i2c-switch@74 {
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
eeprom@54 {
|
|
compatible = "at,24c08";
|
|
reg = <0x54>;
|
|
};
|
|
};
|
|
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
};
|