2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/include/linux/clockchips.h
Venkatesh Pallipadi 7c1e768974 clockevents: prevent clockevent event_handler ending up handler_noop
There is a ordering related problem with clockevents code, due to which
clockevents_register_device() called after tickless/highres switch
will not work. The new clockevent ends up with clockevents_handle_noop as
event handler, resulting in no timer activity.

The problematic path seems to be

* old device already has hrtimer_interrupt as the event_handler
* new clockevent device registers with a higher rating
* tick_check_new_device() is called
  * clockevents_exchange_device() gets called
    * old->event_handler is set to clockevents_handle_noop
  * tick_setup_device() is called for the new device
    * which sets new->event_handler using the old->event_handler which is noop.

Change the ordering so that new device inherits the proper handler.

This does not have any issue in normal case as most likely all the clockevent
devices are setup before the highres switch. But, can potentially be affecting
some corner case where HPET force detect happens after the highres switch.
This was a problem with HPET in MSI mode code that we have been experimenting
with.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:51 +02:00

145 lines
4.2 KiB
C

/* linux/include/linux/clockchips.h
*
* This file contains the structure definitions for clockchips.
*
* If you are not a clockchip, or the time of day code, you should
* not be including this file!
*/
#ifndef _LINUX_CLOCKCHIPS_H
#define _LINUX_CLOCKCHIPS_H
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD
#include <linux/clocksource.h>
#include <linux/cpumask.h>
#include <linux/ktime.h>
#include <linux/notifier.h>
struct clock_event_device;
/* Clock event mode commands */
enum clock_event_mode {
CLOCK_EVT_MODE_UNUSED = 0,
CLOCK_EVT_MODE_SHUTDOWN,
CLOCK_EVT_MODE_PERIODIC,
CLOCK_EVT_MODE_ONESHOT,
CLOCK_EVT_MODE_RESUME,
};
/* Clock event notification values */
enum clock_event_nofitiers {
CLOCK_EVT_NOTIFY_ADD,
CLOCK_EVT_NOTIFY_BROADCAST_ON,
CLOCK_EVT_NOTIFY_BROADCAST_OFF,
CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
CLOCK_EVT_NOTIFY_SUSPEND,
CLOCK_EVT_NOTIFY_RESUME,
CLOCK_EVT_NOTIFY_CPU_DEAD,
};
/*
* Clock event features
*/
#define CLOCK_EVT_FEAT_PERIODIC 0x000001
#define CLOCK_EVT_FEAT_ONESHOT 0x000002
/*
* x86(64) specific misfeatures:
*
* - Clockevent source stops in C3 State and needs broadcast support.
* - Local APIC timer is used as a dummy device.
*/
#define CLOCK_EVT_FEAT_C3STOP 0x000004
#define CLOCK_EVT_FEAT_DUMMY 0x000008
/**
* struct clock_event_device - clock event device descriptor
* @name: ptr to clock event name
* @features: features
* @max_delta_ns: maximum delta value in ns
* @min_delta_ns: minimum delta value in ns
* @mult: nanosecond to cycles multiplier
* @shift: nanoseconds to cycles divisor (power of two)
* @rating: variable to rate clock event devices
* @irq: IRQ number (only for non CPU local devices)
* @cpumask: cpumask to indicate for which CPUs this device works
* @set_next_event: set next event function
* @set_mode: set mode function
* @event_handler: Assigned by the framework to be called by the low
* level handler of the event source
* @broadcast: function to broadcast events
* @list: list head for the management code
* @mode: operating mode assigned by the management code
* @next_event: local storage for the next event in oneshot mode
*/
struct clock_event_device {
const char *name;
unsigned int features;
unsigned long max_delta_ns;
unsigned long min_delta_ns;
unsigned long mult;
int shift;
int rating;
int irq;
cpumask_t cpumask;
int (*set_next_event)(unsigned long evt,
struct clock_event_device *);
void (*set_mode)(enum clock_event_mode mode,
struct clock_event_device *);
void (*event_handler)(struct clock_event_device *);
void (*broadcast)(cpumask_t mask);
struct list_head list;
enum clock_event_mode mode;
ktime_t next_event;
};
/*
* Calculate a multiplication factor for scaled math, which is used to convert
* nanoseconds based values to clock ticks:
*
* clock_ticks = (nanoseconds * factor) >> shift.
*
* div_sc is the rearranged equation to calculate a factor from a given clock
* ticks / nanoseconds ratio:
*
* factor = (clock_ticks << shift) / nanoseconds
*/
static inline unsigned long div_sc(unsigned long ticks, unsigned long nsec,
int shift)
{
uint64_t tmp = ((uint64_t)ticks) << shift;
do_div(tmp, nsec);
return (unsigned long) tmp;
}
/* Clock event layer functions */
extern unsigned long clockevent_delta2ns(unsigned long latch,
struct clock_event_device *evt);
extern void clockevents_register_device(struct clock_event_device *dev);
extern void clockevents_exchange_device(struct clock_event_device *old,
struct clock_event_device *new);
extern void clockevents_set_mode(struct clock_event_device *dev,
enum clock_event_mode mode);
extern int clockevents_register_notifier(struct notifier_block *nb);
extern int clockevents_program_event(struct clock_event_device *dev,
ktime_t expires, ktime_t now);
extern void clockevents_handle_noop(struct clock_event_device *dev);
#ifdef CONFIG_GENERIC_CLOCKEVENTS
extern void clockevents_notify(unsigned long reason, void *arg);
#else
# define clockevents_notify(reason, arg) do { } while (0)
#endif
#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */
#define clockevents_notify(reason, arg) do { } while (0)
#endif
#endif