renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
Code
f36fc04e4c
linux-next/drivers/clk/sunxi/clk-sunxi.c
Linus Torvalds f36fc04e4c The clk framework changes for 4.3 are mostly updates to existing drivers 
and the addition of new clock drivers. Stephen Boyd has also done a lot
 of subsystem-wide driver clean-ups (thanks!). There are also fixes to
 the framework core and changes to better split clock provider drivers
 from clock consumer drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5KelAAoJEKI6nJvDJaTUwaQP/RVb70v6XSgMIePuOq3iaECT
 bclCAyito3YFwykrPPmQ1DucHvEjlWopeFwKqEE9VjNl07TVIH/OMGeonb9yErIY
 aN+FMoA9RUGVexMhy004q5sSbOEihAqTgKWaOiYoY8zAfJfeTpYXUoy34FcrW7MB
 j/cDDJgigtWe9zzcdrW04oT454lXQaSQuGX39tDCR0s0S3soYU2JyjkyBGiO5Yid
 1yIMq/nzI8SrCwxwD/nFwQNtg7lqiAN291Nbi4At1vvG5r4RhNveuLGv8uJ50XRB
 xwy0sdHLIVJrIJ8OUcs1sY8wxu7ghDS8u+vjTNO2RzBf3KZWbuXWX+yVM7JQi4Ty
 0iL5hGbvERy5E9QSzzH+Ox2jVt5e/r/dyvRf3oBDPVrFXhKusYhn6JmdUVJkTZ83
 GTw2sQdEpcmry4z/50/MaqpZuXVZ09VTOCTqp8ToseJjsz9jXxVhQ4HdAwLc8cmV
 txWGRXuBxCB+2o8M0oky3IKS69VFFH5u6QQ0KG8+JYOrDDG7GcnJsFeV7mQjlu8g
 3evYUILNAUfJGBpkOeLs654KUBHwUyXc87cUIKwjGaPruWb2048+kdCVrL3IFwPb
 sS/7Qn3DQ90pHFUTssDnWLz3X0IWT3H0iV4zZyAqqdARugEo+mpykmXmMWcWc3VR
 MrD1l3GVxLegEf242Zpo
 =QAiQ
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Michael Turquette:
 "The clk framework changes for 4.3 are mostly updates to existing
  drivers and the addition of new clock drivers.  Stephen Boyd has also
  done a lot of subsystem-wide driver clean-ups (thanks!).  There are
  also fixes to the framework core and changes to better split clock
  provider drivers from clock consumer drivers"

* tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: s5pv210: add missing call to samsung_clk_of_add_provider()
  clk: pistachio: correct critical clock list
  clk: pistachio: Fix PLL rate calculation in integer mode
  clk: pistachio: Fix override of clk-pll settings from boot loader
  clk: pistachio: Fix 32bit integer overflows
  clk: tegra: Fix some static checker problems
  clk: qcom: Fix MSM8916 prng clock enable bit
  clk: Add missing header for 'bool' definition to clk-conf.h
  drivers/clk: appropriate __init annotation for const data
  clk: rockchip: register pll mux before pll itself
  clk: add bindings for the Ux500 clocks
  clk/ARM: move Ux500 PRCC bases to the device tree
  clk: remove duplicated code with __clk_set_parent_after
  clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
  clk: Constify clk_hw argument to provider APIs
  clk: Hi6220: add stub clock driver
  dt-bindings: clk: Hi6220: Document stub clock driver
  dt-bindings: arm: Hi6220: add doc for SRAM controller
  clk: atlas7: fix pll missed divide NR in fraction mode
  clk: atlas7: fix bit field and its root clk for coresight_tpiu
  ...
2015-08-31 17:26:48 -07:00

1220 lines
29 KiB
C
Raw Blame History

/*
* Copyright 2013 Emilio López
*
* Emilio López <emilio@elopez.com.ar>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/log2.h>
#include "clk-factors.h"
static DEFINE_SPINLOCK(clk_lock);
/**
* sun6i_a31_ahb1_clk_setup() - Setup function for a31 ahb1 composite clk
*/
#define SUN6I_AHB1_MAX_PARENTS 4
#define SUN6I_AHB1_MUX_PARENT_PLL6 3
#define SUN6I_AHB1_MUX_SHIFT 12
/* un-shifted mask is what mux_clk expects */
#define SUN6I_AHB1_MUX_MASK 0x3
#define SUN6I_AHB1_MUX_GET_PARENT(reg) ((reg >> SUN6I_AHB1_MUX_SHIFT) & \
SUN6I_AHB1_MUX_MASK)
#define SUN6I_AHB1_DIV_SHIFT 4
#define SUN6I_AHB1_DIV_MASK (0x3 << SUN6I_AHB1_DIV_SHIFT)
#define SUN6I_AHB1_DIV_GET(reg) ((reg & SUN6I_AHB1_DIV_MASK) >> \
SUN6I_AHB1_DIV_SHIFT)
#define SUN6I_AHB1_DIV_SET(reg, div) ((reg & ~SUN6I_AHB1_DIV_MASK) | \
(div << SUN6I_AHB1_DIV_SHIFT))
#define SUN6I_AHB1_PLL6_DIV_SHIFT 6
#define SUN6I_AHB1_PLL6_DIV_MASK (0x3 << SUN6I_AHB1_PLL6_DIV_SHIFT)
#define SUN6I_AHB1_PLL6_DIV_GET(reg) ((reg & SUN6I_AHB1_PLL6_DIV_MASK) >> \
SUN6I_AHB1_PLL6_DIV_SHIFT)
#define SUN6I_AHB1_PLL6_DIV_SET(reg, div) ((reg & ~SUN6I_AHB1_PLL6_DIV_MASK) | \
(div << SUN6I_AHB1_PLL6_DIV_SHIFT))
struct sun6i_ahb1_clk {
struct clk_hw hw;
void __iomem *reg;
};
#define to_sun6i_ahb1_clk(_hw) container_of(_hw, struct sun6i_ahb1_clk, hw)
static unsigned long sun6i_ahb1_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw);
unsigned long rate;
u32 reg;
/* Fetch the register value */
reg = readl(ahb1->reg);
/* apply pre-divider first if parent is pll6 */
if (SUN6I_AHB1_MUX_GET_PARENT(reg) == SUN6I_AHB1_MUX_PARENT_PLL6)
parent_rate /= SUN6I_AHB1_PLL6_DIV_GET(reg) + 1;
/* clk divider */
rate = parent_rate >> SUN6I_AHB1_DIV_GET(reg);
return rate;
}
static long sun6i_ahb1_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp,
u8 parent, unsigned long parent_rate)
{
u8 div, calcp, calcm = 1;
/*
* clock can only divide, so we will never be able to achieve
* frequencies higher than the parent frequency
*/
if (parent_rate && rate > parent_rate)
rate = parent_rate;
div = DIV_ROUND_UP(parent_rate, rate);
/* calculate pre-divider if parent is pll6 */
if (parent == SUN6I_AHB1_MUX_PARENT_PLL6) {
if (div < 4)
calcp = 0;
else if (div / 2 < 4)
calcp = 1;
else if (div / 4 < 4)
calcp = 2;
else
calcp = 3;
calcm = DIV_ROUND_UP(div, 1 << calcp);
} else {
calcp = __roundup_pow_of_two(div);
calcp = calcp > 3 ? 3 : calcp;
}
/* we were asked to pass back divider values */
if (divp) {
*divp = calcp;
*pre_divp = calcm - 1;
}
return (parent_rate / calcm) >> calcp;
}
static int sun6i_ahb1_clk_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_hw *parent, *best_parent = NULL;
int i, num_parents;
unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
/* find the parent that can help provide the fastest rate <= rate */
num_parents = clk_hw_get_num_parents(hw);
for (i = 0; i < num_parents; i++) {
parent = clk_hw_get_parent_by_index(hw, i);
if (!parent)
continue;
if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)
parent_rate = clk_hw_round_rate(parent, req->rate);
else
parent_rate = clk_hw_get_rate(parent);
child_rate = sun6i_ahb1_clk_round(req->rate, NULL, NULL, i,
parent_rate);
if (child_rate <= req->rate && child_rate > best_child_rate) {
best_parent = parent;
best = parent_rate;
best_child_rate = child_rate;
}
}
if (!best_parent)
return -EINVAL;
req->best_parent_hw = best_parent;
req->best_parent_rate = best;
req->rate = best_child_rate;
return 0;
}
static int sun6i_ahb1_clk_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw);
unsigned long flags;
u8 div, pre_div, parent;
u32 reg;
spin_lock_irqsave(&clk_lock, flags);
reg = readl(ahb1->reg);
/* need to know which parent is used to apply pre-divider */
parent = SUN6I_AHB1_MUX_GET_PARENT(reg);
sun6i_ahb1_clk_round(rate, &div, &pre_div, parent, parent_rate);
reg = SUN6I_AHB1_DIV_SET(reg, div);
reg = SUN6I_AHB1_PLL6_DIV_SET(reg, pre_div);
writel(reg, ahb1->reg);
spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
static const struct clk_ops sun6i_ahb1_clk_ops = {
.determine_rate = sun6i_ahb1_clk_determine_rate,
.recalc_rate = sun6i_ahb1_clk_recalc_rate,
.set_rate = sun6i_ahb1_clk_set_rate,
};
static void __init sun6i_ahb1_clk_setup(struct device_node *node)
{
struct clk *clk;
struct sun6i_ahb1_clk *ahb1;
struct clk_mux *mux;
const char *clk_name = node->name;
const char *parents[SUN6I_AHB1_MAX_PARENTS];
void __iomem *reg;
int i;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg))
return;
/* we have a mux, we will have >1 parents */
i = of_clk_parent_fill(node, parents, SUN6I_AHB1_MAX_PARENTS);
of_property_read_string(node, "clock-output-names", &clk_name);
ahb1 = kzalloc(sizeof(struct sun6i_ahb1_clk), GFP_KERNEL);
if (!ahb1)
return;
mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
if (!mux) {
kfree(ahb1);
return;
}
/* set up clock properties */
mux->reg = reg;
mux->shift = SUN6I_AHB1_MUX_SHIFT;
mux->mask = SUN6I_AHB1_MUX_MASK;
mux->lock = &clk_lock;
ahb1->reg = reg;
clk = clk_register_composite(NULL, clk_name, parents, i,
&mux->hw, &clk_mux_ops,
&ahb1->hw, &sun6i_ahb1_clk_ops,
NULL, NULL, 0);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
}
}
CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk", sun6i_ahb1_clk_setup);
/* Maximum number of parents our clocks have */
#define SUNXI_MAX_PARENTS 5
/**
* sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1
* PLL1 rate is calculated as follows
* rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
* parent_rate is always 24Mhz
*/
static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 div;
/* Normalize value to a 6M multiple */
div = *freq / 6000000;
*freq = 6000000 * div;
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
/* m is always zero for pll1 */
*m = 0;
/* k is 1 only on these cases */
if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
*k = 1;
else
*k = 0;
/* p will be 3 for divs under 10 */
if (div < 10)
*p = 3;
/* p will be 2 for divs between 10 - 20 and odd divs under 32 */
else if (div < 20 || (div < 32 && (div & 1)))
*p = 2;
/* p will be 1 for even divs under 32, divs under 40 and odd pairs
* of divs between 40-62 */
else if (div < 40 || (div < 64 && (div & 2)))
*p = 1;
/* any other entries have p = 0 */
else
*p = 0;
/* calculate a suitable n based on k and p */
div <<= *p;
div /= (*k + 1);
*n = div / 4;
}
/**
* sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1
* PLL1 rate is calculated as follows
* rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
* parent_rate should always be 24MHz
*/
static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
/*
* We can operate only on MHz, this will make our life easier
* later.
*/
u32 freq_mhz = *freq / 1000000;
u32 parent_freq_mhz = parent_rate / 1000000;
/*
* Round down the frequency to the closest multiple of either
* 6 or 16
*/
u32 round_freq_6 = round_down(freq_mhz, 6);
u32 round_freq_16 = round_down(freq_mhz, 16);
if (round_freq_6 > round_freq_16)
freq_mhz = round_freq_6;
else
freq_mhz = round_freq_16;
*freq = freq_mhz * 1000000;
/*
* If the factors pointer are null, we were just called to
* round down the frequency.
* Exit.
*/
if (n == NULL)
return;
/* If the frequency is a multiple of 32 MHz, k is always 3 */
if (!(freq_mhz % 32))
*k = 3;
/* If the frequency is a multiple of 9 MHz, k is always 2 */
else if (!(freq_mhz % 9))
*k = 2;
/* If the frequency is a multiple of 8 MHz, k is always 1 */
else if (!(freq_mhz % 8))
*k = 1;
/* Otherwise, we don't use the k factor */
else
*k = 0;
/*
* If the frequency is a multiple of 2 but not a multiple of
* 3, m is 3. This is the first time we use 6 here, yet we
* will use it on several other places.
* We use this number because it's the lowest frequency we can
* generate (with n = 0, k = 0, m = 3), so every other frequency
* somehow relates to this frequency.
*/
if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
*m = 2;
/*
* If the frequency is a multiple of 6MHz, but the factor is
* odd, m will be 3
*/
else if ((freq_mhz / 6) & 1)
*m = 3;
/* Otherwise, we end up with m = 1 */
else
*m = 1;
/* Calculate n thanks to the above factors we already got */
*n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1;
/*
* If n end up being outbound, and that we can still decrease
* m, do it.
*/
if ((*n + 1) > 31 && (*m + 1) > 1) {
*n = (*n + 1) / 2 - 1;
*m = (*m + 1) / 2 - 1;
}
}
/**
* sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1
* PLL1 rate is calculated as follows
* rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
* parent_rate is always 24Mhz
*/
static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 div;
/* Normalize value to a 6M multiple */
div = *freq / 6000000;
*freq = 6000000 * div;
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
/* m is always zero for pll1 */
*m = 0;
/* k is 1 only on these cases */
if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
*k = 1;
else
*k = 0;
/* p will be 2 for divs under 20 and odd divs under 32 */
if (div < 20 || (div < 32 && (div & 1)))
*p = 2;
/* p will be 1 for even divs under 32, divs under 40 and odd pairs
* of divs between 40-62 */
else if (div < 40 || (div < 64 && (div & 2)))
*p = 1;
/* any other entries have p = 0 */
else
*p = 0;
/* calculate a suitable n based on k and p */
div <<= *p;
div /= (*k + 1);
*n = div / 4 - 1;
}
/**
* sun4i_get_pll5_factors() - calculates n, k factors for PLL5
* PLL5 rate is calculated as follows
* rate = parent_rate * n * (k + 1)
* parent_rate is always 24Mhz
*/
static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 div;
/* Normalize value to a parent_rate multiple (24M) */
div = *freq / parent_rate;
*freq = parent_rate * div;
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
if (div < 31)
*k = 0;
else if (div / 2 < 31)
*k = 1;
else if (div / 3 < 31)
*k = 2;
else
*k = 3;
*n = DIV_ROUND_UP(div, (*k+1));
}
/**
* sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2
* PLL6x2 rate is calculated as follows
* rate = parent_rate * (n + 1) * (k + 1)
* parent_rate is always 24Mhz
*/
static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 div;
/* Normalize value to a parent_rate multiple (24M) */
div = *freq / parent_rate;
*freq = parent_rate * div;
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
*k = div / 32;
if (*k > 3)
*k = 3;
*n = DIV_ROUND_UP(div, (*k+1)) - 1;
}
/**
* sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB
* AHB rate is calculated as follows
* rate = parent_rate >> p
*/
static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u32 div;
/* divide only */
if (parent_rate < *freq)
*freq = parent_rate;
/*
* user manual says valid speed is 8k ~ 276M, but tests show it
* can work at speeds up to 300M, just after reparenting to pll6
*/
if (*freq < 8000)
*freq = 8000;
if (*freq > 300000000)
*freq = 300000000;
div = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
/* p = 0 ~ 3 */
if (div > 3)
div = 3;
*freq = parent_rate >> div;
/* we were called to round the frequency, we can now return */
if (p == NULL)
return;
*p = div;
}
/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
* APB1 rate is calculated as follows
* rate = (parent_rate >> p) / (m + 1);
*/
static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 calcm, calcp;
if (parent_rate < *freq)
*freq = parent_rate;
parent_rate = DIV_ROUND_UP(parent_rate, *freq);
/* Invalid rate! */
if (parent_rate > 32)
return;
if (parent_rate <= 4)
calcp = 0;
else if (parent_rate <= 8)
calcp = 1;
else if (parent_rate <= 16)
calcp = 2;
else
calcp = 3;
calcm = (parent_rate >> calcp) - 1;
*freq = (parent_rate >> calcp) / (calcm + 1);
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
*m = calcm;
*p = calcp;
}
/**
* sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
* CLK_OUT rate is calculated as follows
* rate = (parent_rate >> p) / (m + 1);
*/
static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
{
u8 div, calcm, calcp;
/* These clocks can only divide, so we will never be able to achieve
* frequencies higher than the parent frequency */
if (*freq > parent_rate)
*freq = parent_rate;
div = DIV_ROUND_UP(parent_rate, *freq);
if (div < 32)
calcp = 0;
else if (div / 2 < 32)
calcp = 1;
else if (div / 4 < 32)
calcp = 2;
else
calcp = 3;
calcm = DIV_ROUND_UP(div, 1 << calcp);
*freq = (parent_rate >> calcp) / calcm;
/* we were called to round the frequency, we can now return */
if (n == NULL)
return;
*m = calcm - 1;
*p = calcp;
}
/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
static struct clk_factors_config sun4i_pll1_config = {
.nshift = 8,
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
.mshift = 0,
.mwidth = 2,
.pshift = 16,
.pwidth = 2,
};
static struct clk_factors_config sun6i_a31_pll1_config = {
.nshift = 8,
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
.mshift = 0,
.mwidth = 2,
.n_start = 1,
};
static struct clk_factors_config sun8i_a23_pll1_config = {
.nshift = 8,
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
.mshift = 0,
.mwidth = 2,
.pshift = 16,
.pwidth = 2,
.n_start = 1,
};
static struct clk_factors_config sun4i_pll5_config = {
.nshift = 8,
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
};
static struct clk_factors_config sun6i_a31_pll6_config = {
.nshift = 8,
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
.n_start = 1,
};
static struct clk_factors_config sun5i_a13_ahb_config = {
.pshift = 4,
.pwidth = 2,
};
static struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
.pshift = 16,
.pwidth = 2,
};
/* user manual says "n" but it's really "p" */
static struct clk_factors_config sun7i_a20_out_config = {
.mshift = 8,
.mwidth = 5,
.pshift = 20,
.pwidth = 2,
};
static const struct factors_data sun4i_pll1_data __initconst = {
.enable = 31,
.table = &sun4i_pll1_config,
.getter = sun4i_get_pll1_factors,
};
static const struct factors_data sun6i_a31_pll1_data __initconst = {
.enable = 31,
.table = &sun6i_a31_pll1_config,
.getter = sun6i_a31_get_pll1_factors,
};
static const struct factors_data sun8i_a23_pll1_data __initconst = {
.enable = 31,
.table = &sun8i_a23_pll1_config,
.getter = sun8i_a23_get_pll1_factors,
};
static const struct factors_data sun7i_a20_pll4_data __initconst = {
.enable = 31,
.table = &sun4i_pll5_config,
.getter = sun4i_get_pll5_factors,
};
static const struct factors_data sun4i_pll5_data __initconst = {
.enable = 31,
.table = &sun4i_pll5_config,
.getter = sun4i_get_pll5_factors,
.name = "pll5",
};
static const struct factors_data sun4i_pll6_data __initconst = {
.enable = 31,
.table = &sun4i_pll5_config,
.getter = sun4i_get_pll5_factors,
.name = "pll6",
};
static const struct factors_data sun6i_a31_pll6_data __initconst = {
.enable = 31,
.table = &sun6i_a31_pll6_config,
.getter = sun6i_a31_get_pll6_factors,
.name = "pll6x2",
};
static const struct factors_data sun5i_a13_ahb_data __initconst = {
.mux = 6,
.muxmask = BIT(1) | BIT(0),
.table = &sun5i_a13_ahb_config,
.getter = sun5i_a13_get_ahb_factors,
};
static const struct factors_data sun4i_apb1_data __initconst = {
.mux = 24,
.muxmask = BIT(1) | BIT(0),
.table = &sun4i_apb1_config,
.getter = sun4i_get_apb1_factors,
};
static const struct factors_data sun7i_a20_out_data __initconst = {
.enable = 31,
.mux = 24,
.muxmask = BIT(1) | BIT(0),
.table = &sun7i_a20_out_config,
.getter = sun7i_a20_get_out_factors,
};
static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
const struct factors_data *data)
{
void __iomem *reg;
reg = of_iomap(node, 0);
if (!reg) {
pr_err("Could not get registers for factors-clk: %s\n",
node->name);
return NULL;
}
return sunxi_factors_register(node, data, &clk_lock, reg);
}
/**
* sunxi_mux_clk_setup() - Setup function for muxes
*/
#define SUNXI_MUX_GATE_WIDTH 2
struct mux_data {
u8 shift;
};
static const struct mux_data sun4i_cpu_mux_data __initconst = {
.shift = 16,
};
static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
.shift = 12,
};
static void __init sunxi_mux_clk_setup(struct device_node *node,
struct mux_data *data)
{
struct clk *clk;
const char *clk_name = node->name;
const char *parents[SUNXI_MAX_PARENTS];
void __iomem *reg;
int i;
reg = of_iomap(node, 0);
i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS);
of_property_read_string(node, "clock-output-names", &clk_name);
clk = clk_register_mux(NULL, clk_name, parents, i,
CLK_SET_RATE_PARENT, reg,
data->shift, SUNXI_MUX_GATE_WIDTH,
0, &clk_lock);
if (clk) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
}
}
/**
* sunxi_divider_clk_setup() - Setup function for simple divider clocks
*/
struct div_data {
u8 shift;
u8 pow;
u8 width;
const struct clk_div_table *table;
};
static const struct div_data sun4i_axi_data __initconst = {
.shift = 0,
.pow = 0,
.width = 2,
};
static const struct clk_div_table sun8i_a23_axi_table[] __initconst = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 3 },
{ .val = 3, .div = 4 },
{ .val = 4, .div = 4 },
{ .val = 5, .div = 4 },
{ .val = 6, .div = 4 },
{ .val = 7, .div = 4 },
{ } /* sentinel */
};
static const struct div_data sun8i_a23_axi_data __initconst = {
.width = 3,
.table = sun8i_a23_axi_table,
};
static const struct div_data sun4i_ahb_data __initconst = {
.shift = 4,
.pow = 1,
.width = 2,
};
static const struct clk_div_table sun4i_apb0_table[] __initconst = {
{ .val = 0, .div = 2 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 8 },
{ } /* sentinel */
};
static const struct div_data sun4i_apb0_data __initconst = {
.shift = 8,
.pow = 1,
.width = 2,
.table = sun4i_apb0_table,
};
static void __init sunxi_divider_clk_setup(struct device_node *node,
struct div_data *data)
{
struct clk *clk;
const char *clk_name = node->name;
const char *clk_parent;
void __iomem *reg;
reg = of_iomap(node, 0);
clk_parent = of_clk_get_parent_name(node, 0);
of_property_read_string(node, "clock-output-names", &clk_name);
clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0,
reg, data->shift, data->width,
data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
data->table, &clk_lock);
if (clk) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
}
}
/**
* sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
*/
#define SUNXI_GATES_MAX_SIZE 64
struct gates_data {
DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
};
/**
* sunxi_divs_clk_setup() helper data
*/
#define SUNXI_DIVS_MAX_QTY 4
#define SUNXI_DIVISOR_WIDTH 2
struct divs_data {
const struct factors_data *factors; /* data for the factor clock */
int ndivs; /* number of outputs */
/*
* List of outputs. Refer to the diagram for sunxi_divs_clk_setup():
* self or base factor clock refers to the output from the pll
* itself. The remaining refer to fixed or configurable divider
* outputs.
*/
struct {
u8 self; /* is it the base factor clock? (only one) */
u8 fixed; /* is it a fixed divisor? if not... */
struct clk_div_table *table; /* is it a table based divisor? */
u8 shift; /* otherwise it's a normal divisor with this shift */
u8 pow; /* is it power-of-two based? */
u8 gate; /* is it independently gateable? */
} div[SUNXI_DIVS_MAX_QTY];
};
static struct clk_div_table pll6_sata_tbl[] = {
{ .val = 0, .div = 6, },
{ .val = 1, .div = 12, },
{ .val = 2, .div = 18, },
{ .val = 3, .div = 24, },
{ } /* sentinel */
};
static const struct divs_data pll5_divs_data __initconst = {
.factors = &sun4i_pll5_data,
.ndivs = 2,
.div = {
{ .shift = 0, .pow = 0, }, /* M, DDR */
{ .shift = 16, .pow = 1, }, /* P, other */
/* No output for the base factor clock */
}
};
static const struct divs_data pll6_divs_data __initconst = {
.factors = &sun4i_pll6_data,
.ndivs = 4,
.div = {
{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
{ .fixed = 2 }, /* P, other */
{ .self = 1 }, /* base factor clock, 2x */
{ .fixed = 4 }, /* pll6 / 4, used as ahb input */
}
};
static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
.factors = &sun6i_a31_pll6_data,
.ndivs = 2,
.div = {
{ .fixed = 2 }, /* normal output */
{ .self = 1 }, /* base factor clock, 2x */
}
};
/**
* sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
*
* These clocks look something like this
* ________________________
* | ___divisor 1---|----> to consumer
* parent >--| pll___/___divisor 2---|----> to consumer
* | \_______________|____> to consumer
* |________________________|
*/
static void __init sunxi_divs_clk_setup(struct device_node *node,
struct divs_data *data)
{
struct clk_onecell_data *clk_data;
const char *parent;
const char *clk_name;
struct clk **clks, *pclk;
struct clk_hw *gate_hw, *rate_hw;
const struct clk_ops *rate_ops;
struct clk_gate *gate = NULL;
struct clk_fixed_factor *fix_factor;
struct clk_divider *divider;
void __iomem *reg;
int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
int flags, clkflags;
/* if number of children known, use it */
if (data->ndivs)
ndivs = data->ndivs;
/* Set up factor clock that we will be dividing */
pclk = sunxi_factors_clk_setup(node, data->factors);
parent = __clk_get_name(pclk);
reg = of_iomap(node, 0);
clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
if (!clk_data)
return;
clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL);
if (!clks)
goto free_clkdata;
clk_data->clks = clks;
/* It's not a good idea to have automatic reparenting changing
* our RAM clock! */
clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
for (i = 0; i < ndivs; i++) {
if (of_property_read_string_index(node, "clock-output-names",
i, &clk_name) != 0)
break;
/* If this is the base factor clock, only update clks */
if (data->div[i].self) {
clk_data->clks[i] = pclk;
continue;
}
gate_hw = NULL;
rate_hw = NULL;
rate_ops = NULL;
/* If this leaf clock can be gated, create a gate */
if (data->div[i].gate) {
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
goto free_clks;
gate->reg = reg;
gate->bit_idx = data->div[i].gate;
gate->lock = &clk_lock;
gate_hw = &gate->hw;
}
/* Leaves can be fixed or configurable divisors */
if (data->div[i].fixed) {
fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL);
if (!fix_factor)
goto free_gate;
fix_factor->mult = 1;
fix_factor->div = data->div[i].fixed;
rate_hw = &fix_factor->hw;
rate_ops = &clk_fixed_factor_ops;
} else {
divider = kzalloc(sizeof(*divider), GFP_KERNEL);
if (!divider)
goto free_gate;
flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0;
divider->reg = reg;
divider->shift = data->div[i].shift;
divider->width = SUNXI_DIVISOR_WIDTH;
divider->flags = flags;
divider->lock = &clk_lock;
divider->table = data->div[i].table;
rate_hw = &divider->hw;
rate_ops = &clk_divider_ops;
}
/* Wrap the (potential) gate and the divisor on a composite
* clock to unify them */
clks[i] = clk_register_composite(NULL, clk_name, &parent, 1,
NULL, NULL,
rate_hw, rate_ops,
gate_hw, &clk_gate_ops,
clkflags);
WARN_ON(IS_ERR(clk_data->clks[i]));
clk_register_clkdev(clks[i], clk_name, NULL);
}
/* Adjust to the real max */
clk_data->clk_num = i;
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
return;
free_gate:
kfree(gate);
free_clks:
kfree(clks);
free_clkdata:
kfree(clk_data);
}
/* Matches for factors clocks */
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
{.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,},
{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
{}
};
/* Matches for divider clocks */
static const struct of_device_id clk_div_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,},
{.compatible = "allwinner,sun8i-a23-axi-clk", .data = &sun8i_a23_axi_data,},
{.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,},
{.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,},
{}
};
/* Matches for divided outputs */
static const struct of_device_id clk_divs_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,},
{.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,},
{.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,},
{}
};
/* Matches for mux clocks */
static const struct of_device_id clk_mux_match[] __initconst = {
{.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
{}
};
static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
void *function)
{
struct device_node *np;
const struct div_data *data;
const struct of_device_id *match;
void (*setup_function)(struct device_node *, const void *) = function;
for_each_matching_node_and_match(np, clk_match, &match) {
data = match->data;
setup_function(np, data);
}
}
static void __init sunxi_init_clocks(const char *clocks[], int nclocks)
{
unsigned int i;
/* Register divided output clocks */
of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup);
/* Register factor clocks */
of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
/* Register divider clocks */
of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
/* Register mux clocks */
of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
/* Protect the clocks that needs to stay on */
for (i = 0; i < nclocks; i++) {
struct clk *clk = clk_get(NULL, clocks[i]);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
}
static const char *sun4i_a10_critical_clocks[] __initdata = {
"pll5_ddr",
};
static void __init sun4i_a10_init_clocks(struct device_node *node)
{
sunxi_init_clocks(sun4i_a10_critical_clocks,
ARRAY_SIZE(sun4i_a10_critical_clocks));
}
CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks);
static const char *sun5i_critical_clocks[] __initdata = {
"cpu",
"pll5_ddr",
};
static void __init sun5i_init_clocks(struct device_node *node)
{
sunxi_init_clocks(sun5i_critical_clocks,
ARRAY_SIZE(sun5i_critical_clocks));
}
CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks);
CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks);
CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks);
static const char *sun6i_critical_clocks[] __initdata = {
"cpu",
};
static void __init sun6i_init_clocks(struct device_node *node)
{
sunxi_init_clocks(sun6i_critical_clocks,
ARRAY_SIZE(sun6i_critical_clocks));
}
CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks);
CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
static void __init sun9i_init_clocks(struct device_node *node)
{
sunxi_init_clocks(NULL, 0);
}
CLK_OF_DECLARE(sun9i_a80_clk_init, "allwinner,sun9i-a80", sun9i_init_clocks);
View Git Blame Copy Permalink