2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/arch/arm/mach-imx/headsmp.S
Shawn Guo 087bb28329 ARM: imx: replicate the diagnostic register of boot cpu into secondary cores
The diagnostic register holds the errata bits.  Mostly bootloader
does not bring up secondary cores, so that when errata bits are set
in bootloader, they are set only for boot cpu.  But on a SMP
configuration, it should be equally done on every single core.
Set up the diagnostic register for secondary cores by replicating
the register from boot cpu.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2013-05-12 21:39:18 +08:00

72 lines
1.6 KiB
ArmAsm

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
.section ".text.head", "ax"
#ifdef CONFIG_SMP
diag_reg_offset:
.word g_diag_reg - .
.macro set_diag_reg
adr r0, diag_reg_offset
ldr r1, [r0]
add r1, r1, r0 @ r1 = physical &g_diag_reg
ldr r0, [r1]
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
.endm
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
#ifdef CONFIG_ARM_CPU_SUSPEND
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
adr r0, l2x0_saved_regs_offset
ldr r2, [r0]
add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
mov r1, #0x1
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
l2x0_saved_regs_offset:
.word l2x0_saved_regs - .
#else
.macro pl310_resume
.endm
#endif
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
#endif