2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/drivers/bcma/driver_gpio.c
Linus Torvalds ea584595fc This is the bulk of GPIO changes for the v3.18 development
cycle:
 
 - Increase the default ARCH_NR_GPIO from 256 to 512. This
   was done to avoid having a custom <asm/gpio.h> header for
   the x86 architecture - GPIO is custom and complicated
   enough as it is already! We want to move to a radix to
   store the descriptors going forward, and finally get rid
   of this fixed array size altogether.
 
 - Endgame patching of the gpio_remove() semantics initiated
   by Abdoulaye Berthe. It is not accepted by the system that
   the removal of a GPIO chip fails during e.g. reboot or
   shutdown, and therefore the return value has now painfully
   been refactored away. For special cases like GPIO expanders
   on a hot-pluggable bus like USB, we may later add some
   gpiochip_try_remove() call, but for the cases we have now,
   return values are moot.
 
 - Some incremental refactoring of the gpiolib core and ACPI
   GPIO library for more descriptor usage.
 
 - Refactor the chained IRQ handler set-up method to handle
   also threaded, nested interrupts and set up the parent IRQ
   correctly. Switch STMPE and TC3589x drivers to use this
   registration method.
 
 - Add a .irq_not_threaded flag to the struct gpio_chip, so
   that also GPIO expanders that block but are still not
   using threaded IRQ handlers.
 
 - New drivers for the ARM64 X-Gene SoC GPIO controller.
 
 - The syscon GPIO driver has been improved to handle the
   "DSP GPIO" found on the TI Keystone 2 SoC:s.
 
 - ADNP driver switched to use gpiolib irqchip helpers.
 
 - Refactor the DWAPB driver to support being instantiated
   from and MFD cell (platform device).
 
 - Incremental feature improvement in the Zynq, MCP23S08,
   DWAPB, OMAP, Xilinx and Crystalcove drivers.
 
 - Various minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNOr0AAoJEEEQszewGV1z9toP/2ISXRnsi3+jlqVmEGm/y6EA
 PPwJOiYnOhZR2/fTCHIF0PNbIi9pw7xKnzxttYCu4uCz7geHX+FfTwUZ2/KWMfqi
 ZJ9kEoOVVKzKjmL/m2a2tO4IRSBHqJ8dF3yvaNjS3AL7EDfG6F5STErQurdLEynK
 SeJZ2OwM/vRFCac6F7oDlqAUTu3xYGbVD8+zI0H0V/ReocosFlEwcbl2S8ctDWUd
 h98M+gY+A8rxkvVMnmQ/k7rUTme/glDQ3z5xVx+uHbS2/a5M1jSM/71cXE6YnSrR
 it0CK7CHomq2RzHsKf7oH7GD4kFkukMwFKeMoqz75JWz3352VZPTF53chCIqRSgO
 hrgGwZ7WF6pUUUhsn1ZdZsnBPA2Fou2uwslyLSAiE+OYEH2/NSVIOUcorjQcWqU/
 0Kix5yb8X1ZzRMhR+TVrTD5V0jguqp2buXq+0P2XlU6MoO2vy7iNf2eXvPg8sF8C
 anjTCKgmkzy7eyT2uzfDaNZAyfSBKb1TiKiR9zA0SRChJkCi1ErJEXDGeHiptvSA
 +D2k68Ils2LqsvdrnEd2XvVFMllh0iq7b+16o7D+Els0WRbnHpfYCaqfOuF5F4U0
 SmeyI0ruawNDc5e9EBKXstt0/R9AMOetyTcTu29U2ZVo90zGaT1ofT8+R1jJ0kGa
 bPARJZrgecgv1E9Qnnnd
 =8InA
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.18 development cycle:

   - Increase the default ARCH_NR_GPIO from 256 to 512.  This was done
     to avoid having a custom <asm/gpio.h> header for the x86
     architecture - GPIO is custom and complicated enough as it is
     already! We want to move to a radix to store the descriptors going
     forward, and finally get rid of this fixed array size altogether.

   - Endgame patching of the gpio_remove() semantics initiated by
     Abdoulaye Berthe.  It is not accepted by the system that the
     removal of a GPIO chip fails during eg reboot or shutdown, and
     therefore the return value has now painfully been refactored away.
     For special cases like GPIO expanders on a hot-pluggable bus like
     USB, we may later add some gpiochip_try_remove() call, but for the
     cases we have now, return values are moot.

   - Some incremental refactoring of the gpiolib core and ACPI GPIO
     library for more descriptor usage.

   - Refactor the chained IRQ handler set-up method to handle also
     threaded, nested interrupts and set up the parent IRQ correctly.
     Switch STMPE and TC3589x drivers to use this registration method.

   - Add a .irq_not_threaded flag to the struct gpio_chip, so that also
     GPIO expanders that block but are still not using threaded IRQ
     handlers.

   - New drivers for the ARM64 X-Gene SoC GPIO controller.

   - The syscon GPIO driver has been improved to handle the "DSP GPIO"
     found on the TI Keystone 2 SoC:s.

   - ADNP driver switched to use gpiolib irqchip helpers.

   - Refactor the DWAPB driver to support being instantiated from and
     MFD cell (platform device).

   - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
     Xilinx and Crystalcove drivers.

   - Various minor fixes"

* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
  gpio: pch: Build context save/restore only for PM
  pinctrl: abx500: get rid of unused variable
  gpio: ks8695: fix 'else should follow close brace '}''
  gpio: stmpe: add verbose debug code
  gpio: stmpe: fix up interrupt enable logic
  gpio: staticize xway_stp_init()
  gpio: handle also nested irqchips in the chained handler set-up
  gpio: set parent irq on chained handlers
  gpiolib: irqchip: use irq_find_mapping while removing irqchip
  gpio: crystalcove: support virtual GPIO
  pinctrl: bcm281xx: make Kconfig dependency more strict
  gpio: kona: enable only on BCM_MOBILE or for compile testing
  gpio, bcm-kona, LLVMLinux: Remove use of __initconst
  gpio: Fix ngpio in gpio-xilinx driver
  gpio: dwapb: fix pointer to integer cast
  gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
  gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
  gpio: xgene: Fix missing spin_lock_init()
  gpio: ks8695: fix switch case indentation
  gpiolib: add irq_not_threaded flag to gpio_chip
  ...
2014-10-09 14:58:15 -04:00

261 lines
6.1 KiB
C

/*
* Broadcom specific AMBA
* GPIO driver
*
* Copyright 2011, Broadcom Corporation
* Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
#include "bcma_private.h"
static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
{
return container_of(chip, struct bcma_drv_cc, gpio);
}
static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
return !!bcma_chipco_gpio_in(cc, 1 << gpio);
}
static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
int value)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
}
static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
return 0;
}
static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
int value)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
return 0;
}
static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
bcma_chipco_gpio_control(cc, 1 << gpio, 0);
/* clear pulldown */
bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
/* Set pullup */
bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
return 0;
}
static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
/* clear pullup */
bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
}
#if IS_BUILTIN(CONFIG_BCM47XX)
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
return irq_find_mapping(cc->irq_domain, gpio);
else
return -EINVAL;
}
static void bcma_gpio_irq_unmask(struct irq_data *d)
{
struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
int gpio = irqd_to_hwirq(d);
u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
bcma_chipco_gpio_polarity(cc, BIT(gpio), val);
bcma_chipco_gpio_intmask(cc, BIT(gpio), BIT(gpio));
}
static void bcma_gpio_irq_mask(struct irq_data *d)
{
struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
int gpio = irqd_to_hwirq(d);
bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
}
static struct irq_chip bcma_gpio_irq_chip = {
.name = "BCMA-GPIO",
.irq_mask = bcma_gpio_irq_mask,
.irq_unmask = bcma_gpio_irq_unmask,
};
static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
{
struct bcma_drv_cc *cc = dev_id;
u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
unsigned long irqs = (val ^ pol) & mask;
int gpio;
if (!irqs)
return IRQ_NONE;
for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
return IRQ_HANDLED;
}
static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
int gpio, hwirq, err;
if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
return 0;
cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
&irq_domain_simple_ops, cc);
if (!cc->irq_domain) {
err = -ENODEV;
goto err_irq_domain;
}
for (gpio = 0; gpio < chip->ngpio; gpio++) {
int irq = irq_create_mapping(cc->irq_domain, gpio);
irq_set_chip_data(irq, cc);
irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
handle_simple_irq);
}
hwirq = bcma_core_irq(cc->core);
err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
cc);
if (err)
goto err_req_irq;
bcma_chipco_gpio_intmask(cc, ~0, 0);
bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
return 0;
err_req_irq:
for (gpio = 0; gpio < chip->ngpio; gpio++) {
int irq = irq_find_mapping(cc->irq_domain, gpio);
irq_dispose_mapping(irq);
}
irq_domain_remove(cc->irq_domain);
err_irq_domain:
return err;
}
static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
int gpio;
if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
return;
bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
free_irq(bcma_core_irq(cc->core), cc);
for (gpio = 0; gpio < chip->ngpio; gpio++) {
int irq = irq_find_mapping(cc->irq_domain, gpio);
irq_dispose_mapping(irq);
}
irq_domain_remove(cc->irq_domain);
}
#else
static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
{
return 0;
}
static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
{
}
#endif
int bcma_gpio_init(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
int err;
chip->label = "bcma_gpio";
chip->owner = THIS_MODULE;
chip->request = bcma_gpio_request;
chip->free = bcma_gpio_free;
chip->get = bcma_gpio_get_value;
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
#if IS_BUILTIN(CONFIG_BCM47XX)
chip->to_irq = bcma_gpio_to_irq;
#endif
#if IS_BUILTIN(CONFIG_OF)
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
chip->of_node = cc->core->dev.of_node;
#endif
switch (cc->core->bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM53572:
chip->ngpio = 32;
break;
default:
chip->ngpio = 16;
}
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
* a random base number. */
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
chip->base = 0;
else
chip->base = -1;
err = bcma_gpio_irq_domain_init(cc);
if (err)
return err;
err = gpiochip_add(chip);
if (err) {
bcma_gpio_irq_domain_exit(cc);
return err;
}
return 0;
}
int bcma_gpio_unregister(struct bcma_drv_cc *cc)
{
bcma_gpio_irq_domain_exit(cc);
gpiochip_remove(&cc->gpio);
return 0;
}