renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code
f07d91ede6
linux-next/arch/arm/mach-ux500/board-mop500-pins.c
Linus Torvalds 6fa52ed33b ARM: arm-soc driver changes for 3.10 
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00

844 lines
38 KiB
C
Raw Blame History

/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include "pins-db8500.h"
#include "board-mop500.h"
enum custom_pin_cfg_t {
PINS_FOR_DEFAULT,
PINS_FOR_U9500,
};
static enum custom_pin_cfg_t pinsfor;
/* These simply sets bias for pins */
#define BIAS(a,b) static unsigned long a[] = { b }
BIAS(pd, PIN_PULL_DOWN);
BIAS(in_nopull, PIN_INPUT_NOPULL);
BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
BIAS(in_pu, PIN_INPUT_PULLUP);
BIAS(in_pd, PIN_INPUT_PULLDOWN);
BIAS(out_hi, PIN_OUTPUT_HIGH);
BIAS(out_lo, PIN_OUTPUT_LOW);
BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
/* These also force them into GPIO mode */
BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
PIN_SLPM_PDIS_ENABLED);
BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
PIN_SLPM_PDIS_DISABLED);
BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
PIN_SLPM_PDIS_DISABLED);
/* We use these to define hog settings that are always done on boot */
#define DB8500_MUX_HOG(group,func) \
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
#define DB8500_PIN_HOG(pin,conf) \
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
/* These are default states associated with device and changed runtime */
#define DB8500_MUX(group,func,dev) \
PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
#define DB8500_PIN(pin,conf,dev) \
PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
#define DB8500_PIN_IDLE(pin, conf, dev) \
PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \
pin, conf)
#define DB8500_PIN_SLEEP(pin, conf, dev) \
PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
pin, conf)
#define DB8500_MUX_STATE(group, func, dev, state) \
PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
#define DB8500_PIN_STATE(pin, conf, dev, state) \
PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
/*
* uMSP0, mux in 4 pins, regular placement of RX/TX
* explicitly set the pins to no pull
*/
DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
/* MSP2 for HDMI, pull down TXD, TCK, TFS */
DB8500_MUX_HOG("msp2_a_1", "msp2"),
DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
/*
* LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
* pull-up
* TODO: is this really correct? Snowball doesn't have a LCD.
*/
DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
DB8500_PIN_HOG("GPIO68_E1", in_pu),
DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
/*
* STMPE1601/tc35893 keypad IRQ GPIO 218
* TODO: set for snowball and HREF really??
*/
DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
/*
* UART0, we do not mux in u0 here.
* uart-0 pins gpio configuration should be kept intact to prevent
* a glitch in tx line when the tty dev is opened. Later these pins
* are configured by uart driver
*/
DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
/*
* Mux in UART2 on altfunction C and set pull-ups.
* TODO: is this used on U8500 variants and Snowball really?
* The setting on GPIO31 conflicts with magnetometer use on hrefv60
*/
/* default state for UART2 */
DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
/* Sleep state for UART2 */
DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
/*
* The following pin sets were known as "runtime pins" before being
* converted to the pinctrl model. Here we model them as "default"
* states.
*/
/* Mux in UART0 after initialization */
DB8500_MUX("u0_a_1", "u0", "uart0"),
DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
/* Sleep state for UART0 */
DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
/* Mux in UART1 after initialization */
DB8500_MUX("u1rxtx_a_1", "u1", "uart1"),
DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */
DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */
/* Sleep state for UART1 */
DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
/* MSP1 for ALSA codec */
DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"),
DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
/* MSP1 sleep state */
DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"),
DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
/* LCD VSI1 sleep state */
DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
/* Mux in i2c0 block, default state */
DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
/* i2c0 sleep state */
DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
/* Mux in i2c1 block, default state */
DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
/* i2c1 sleep state */
DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
/* Mux in i2c2 block, default state */
DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
/* i2c2 sleep state */
DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
/* Mux in i2c3 block, default state */
DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
/* i2c3 sleep state */
DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
/* SDI0 sleep state */
DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
/* SDI1 sleep state */
DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
/* SDI2 sleep state */
DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
/*SDI4 sleep state */
DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
/* Mux in USB pins, drive STP high */
/* USB default state */
DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
/* USB sleep state */
DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
/* Mux in SPI2 pins on the "other C1" altfunction */
DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
/* SPI2 idle state */
DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
/* SPI2 sleep state */
DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
/* ske default state */
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
/* ske sleep state */
DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
/* STM APE pins states */
DB8500_MUX_STATE("stmape_c_1", "stmape",
"stm", "ape_mipi34"),
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
"stm", "ape_mipi34"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
"stm", "ape_mipi34"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
"stm", "ape_mipi34"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
"stm", "ape_mipi34"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
"stm", "ape_mipi34"), /* dat0 */
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
"stm", "ape_mipi34_sleep"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
"stm", "ape_mipi34_sleep"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
"stm", "ape_mipi34_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
"stm", "ape_mipi34_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
"stm", "ape_mipi34_sleep"), /* dat0 */
DB8500_MUX_STATE("stmape_oc1_1", "stmape",
"stm", "ape_microsd"),
DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
"stm", "ape_microsd"), /* clk */
DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
"stm", "ape_microsd"), /* dat0 */
DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
"stm", "ape_microsd"), /* dat1 */
DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
"stm", "ape_microsd"), /* dat2 */
DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
"stm", "ape_microsd"), /* dat3 */
DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
"stm", "ape_microsd_sleep"), /* clk */
DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
"stm", "ape_microsd_sleep"), /* dat0 */
DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
"stm", "ape_microsd_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
"stm", "ape_microsd_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
"stm", "ape_microsd_sleep"), /* dat3 */
/* STM Modem pins states */
DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
"stm", "mod_mipi34"),
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
"stm", "mod_mipi34"),
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
"stm", "mod_mipi34"),
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
"stm", "mod_mipi34"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
"stm", "mod_mipi34"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
"stm", "mod_mipi34"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
"stm", "mod_mipi34"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
"stm", "mod_mipi34"), /* dat0 */
DB8500_PIN_STATE("GPIO75_H2", in_pu,
"stm", "mod_mipi34"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", out_lo,
"stm", "mod_mipi34"), /* uartmod tx */
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
"stm", "mod_mipi34_sleep"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
"stm", "mod_mipi34_sleep"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
"stm", "mod_mipi34_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
"stm", "mod_mipi34_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
"stm", "mod_mipi34_sleep"), /* dat0 */
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
"stm", "mod_mipi34_sleep"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
"stm", "mod_mipi34_sleep"), /* uartmod tx */
DB8500_MUX_STATE("stmmod_b_1", "stmmod",
"stm", "mod_microsd"),
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
"stm", "mod_microsd"),
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
"stm", "mod_microsd"),
DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
"stm", "mod_microsd"), /* clk */
DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
"stm", "mod_microsd"), /* dat0 */
DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
"stm", "mod_microsd"), /* dat1 */
DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
"stm", "mod_microsd"), /* dat2 */
DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
"stm", "mod_microsd"), /* dat3 */
DB8500_PIN_STATE("GPIO75_H2", in_pu,
"stm", "mod_microsd"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", out_lo,
"stm", "mod_microsd"), /* uartmod tx */
DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
"stm", "mod_microsd_sleep"), /* clk */
DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
"stm", "mod_microsd_sleep"), /* dat0 */
DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
"stm", "mod_microsd_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
"stm", "mod_microsd_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
"stm", "mod_microsd_sleep"), /* dat3 */
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
"stm", "mod_microsd_sleep"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
"stm", "mod_microsd_sleep"), /* uartmod tx */
/* STM dual Modem/APE pins state */
DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
"stm", "mod_mipi34_ape_mipi60"),
DB8500_MUX_STATE("stmape_c_2", "stmape",
"stm", "mod_mipi34_ape_mipi60"),
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
"stm", "mod_mipi34_ape_mipi60"),
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
"stm", "mod_mipi34_ape_mipi60"),
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
DB8500_PIN_STATE("GPIO75_H2", in_pu,
"stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", out_lo,
"stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
DB8500_PIN_STATE("GPIO155_C19", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* clk */
DB8500_PIN_STATE("GPIO156_C17", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
DB8500_PIN_STATE("GPIO157_A18", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
DB8500_PIN_STATE("GPIO158_C18", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
DB8500_PIN_STATE("GPIO159_B19", in_nopull,
"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
};
/*
* These are specifically for the MOP500 and HREFP (pre-v60) version of the
* board, which utilized a TC35892 GPIO expander instead of using a lot of
* on-chip pins as the HREFv60 and later does.
*/
static struct pinctrl_map __initdata mop500_pinmap[] = {
/* Mux in SSP0, pull down RXD pin */
DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
DB8500_PIN_HOG("GPIO145_C13", pd),
/*
* XENON Flashgun on image processor GPIO (controlled from image
* processor firmware), mux in these image processor GPIO lines 0
* (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
* the pins.
*/
DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
DB8500_PIN_HOG("GPIO6_AF6", in_pu),
DB8500_PIN_HOG("GPIO7_AG5", in_pu),
/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
/* Mux in UART1 and set the pull-ups */
DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
/*
* Runtime stuff: make it possible to mux in the SKE keypad
* and bias the pins
*/
/* ske default state */
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
/* ske sleep state */
DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
};
/*
* The HREFv60 series of platforms is using available pins on the DB8500
* insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
* and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
*/
static struct pinctrl_map __initdata hrefv60_pinmap[] = {
/* Drive WLAN_ENA low */
DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
/*
* XENON Flashgun on image processor GPIO (controlled from image
* processor firmware), mux in these image processor GPIO lines 0
* (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
* LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
* from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
*/
DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
/*
* Display Interface 1 uses GPIO 65 for RST (reset).
* Display Interface 2 uses GPIO 66 for RST (reset).
* Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
*/
DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
/*
* Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
* GPIO 67 for interrupts. Pull-up the IRQ line and drive both
* reset signals low.
*/
DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
/*
* Drive D19-D23 for the ETM PTM trace interface low,
* (presumably pins are unconnected therefore grounded here,
* the "other alt C1" setting enables these pins)
*/
DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
/* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
/* NFC ENA and RESET to low, pulldown IRQ line */
DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
/*
* SKE keyboard partly on alt A and partly on "Other alt C1"
* Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
* rows of 6 keys, then pull up force sensing interrup and
* drive reset and force sensing WU low.
*/
DB8500_MUX_HOG("kp_a_1", "kp"),
DB8500_MUX_HOG("kp_oc1_1", "kp"),
DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
/* DiPro Sensor interrupt */
DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
/* Audio Amplifier HF enable */
DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
/* GBF interface, pull low to reset state */
DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
/* MSP : HDTV INTERFACE GPIO line */
DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
/* Accelerometer interrupt lines */
DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
/* SD card detect GPIO pin */
DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
/*
* Runtime stuff
* Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
* etc.
*/
DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
};
static struct pinctrl_map __initdata u9500_pinmap[] = {
/* Mux in UART1 (just RX/TX) and set the pull-ups */
DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
DB8500_PIN_HOG("GPIO4_AH6", in_pu),
DB8500_PIN_HOG("GPIO5_AG6", out_hi),
/* WLAN_IRQ line */
DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
/* HSI */
DB8500_MUX_HOG("hsir_a_1", "hsi"),
DB8500_MUX_HOG("hsit_a_2", "hsi"),
DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
};
static struct pinctrl_map __initdata u8500_pinmap[] = {
DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
};
static struct pinctrl_map __initdata snowball_pinmap[] = {
/* Mux in SSP0 connected to AB8500, pull down RXD pin */
DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
DB8500_PIN_HOG("GPIO145_C13", pd),
/* Always drive the MC0 DAT31DIR line high on these boards */
DB8500_PIN_HOG("GPIO21_AB3", out_hi),
/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
DB8500_MUX_HOG("sm_b_1", "sm"),
/* User LED */
DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
/* Drive RSTn_LAN high */
DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
/* Accelerometer/Magnetometer */
DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
/* WLAN/GBF */
DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
};
/*
* passing "pinsfor=" in kernel cmdline allows for custom
* configuration of GPIOs on u8500 derived boards.
*/
static int __init early_pinsfor(char *p)
{
pinsfor = PINS_FOR_DEFAULT;
if (strcmp(p, "u9500-21") == 0)
pinsfor = PINS_FOR_U9500;
return 0;
}
early_param("pinsfor", early_pinsfor);
int pins_for_u9500(void)
{
if (pinsfor == PINS_FOR_U9500)
return 1;
return 0;
}
static void __init mop500_href_family_pinmaps_init(void)
{
switch (pinsfor) {
case PINS_FOR_U9500:
pinctrl_register_mappings(u9500_pinmap,
ARRAY_SIZE(u9500_pinmap));
break;
case PINS_FOR_DEFAULT:
pinctrl_register_mappings(u8500_pinmap,
ARRAY_SIZE(u8500_pinmap));
default:
break;
}
}
void __init mop500_pinmaps_init(void)
{
pinctrl_register_mappings(mop500_family_pinmap,
ARRAY_SIZE(mop500_family_pinmap));
pinctrl_register_mappings(mop500_pinmap,
ARRAY_SIZE(mop500_pinmap));
mop500_href_family_pinmaps_init();
}
void __init snowball_pinmaps_init(void)
{
pinctrl_register_mappings(mop500_family_pinmap,
ARRAY_SIZE(mop500_family_pinmap));
pinctrl_register_mappings(snowball_pinmap,
ARRAY_SIZE(snowball_pinmap));
pinctrl_register_mappings(u8500_pinmap,
ARRAY_SIZE(u8500_pinmap));
}
void __init hrefv60_pinmaps_init(void)
{
pinctrl_register_mappings(mop500_family_pinmap,
ARRAY_SIZE(mop500_family_pinmap));
pinctrl_register_mappings(hrefv60_pinmap,
ARRAY_SIZE(hrefv60_pinmap));
mop500_href_family_pinmaps_init();
}
View Git Blame Copy Permalink