mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
f041f96abc
This patch adds the bindings document for LT3593 LED drivers. The binding is kept consistent with other LED driver bindings in that it stores all the LED-specific properties in its own subnode. As the hardware only supports one channel, there can consequently only be one sub-node. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
33 lines
936 B
Plaintext
33 lines
936 B
Plaintext
Bindings for Linear Technologies LT3593 LED controller
|
|
|
|
Required properties:
|
|
- compatible: Should be "lltc,lt3593".
|
|
- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
|
|
pin of the chip.
|
|
|
|
The hardware supports only one LED. The properties of this LED are
|
|
configured in a sub-node in the device node.
|
|
|
|
Optional sub-node properties:
|
|
- label: A label for the LED. If none is given, the LED will be
|
|
named "lt3595::".
|
|
- linux,default-trigger: The default trigger for the LED.
|
|
See Documentation/devicetree/bindings/leds/common.txt
|
|
- default-state: The initial state of the LED.
|
|
See Documentation/devicetree/bindings/leds/common.txt
|
|
|
|
If multiple chips of this type are found in a design, each one needs to
|
|
be handled by its own device node.
|
|
|
|
Example:
|
|
|
|
led-controller {
|
|
compatible = "lltc,lt3593";
|
|
lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
led {
|
|
label = "white:backlight";
|
|
default-state = "on";
|
|
};
|
|
};
|