2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/kernel/rcutree_plugin.h
Linus Torvalds 534c97b095 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...
2013-05-05 13:23:27 -07:00

2353 lines
68 KiB
C

/*
* Read-Copy Update mechanism for mutual exclusion (tree-based version)
* Internal non-public definitions that provide either classic
* or preemptible semantics.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright Red Hat, 2009
* Copyright IBM Corporation, 2009
*
* Author: Ingo Molnar <mingo@elte.hu>
* Paul E. McKenney <paulmck@linux.vnet.ibm.com>
*/
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/oom.h>
#include <linux/smpboot.h>
#include <linux/tick.h>
#define RCU_KTHREAD_PRIO 1
#ifdef CONFIG_RCU_BOOST
#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
#else
#define RCU_BOOST_PRIO RCU_KTHREAD_PRIO
#endif
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
static bool have_rcu_nocb_mask; /* Was rcu_nocb_mask allocated? */
static bool __read_mostly rcu_nocb_poll; /* Offload kthread are to poll. */
static char __initdata nocb_buf[NR_CPUS * 5];
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
/*
* Check the RCU kernel configuration parameters and print informative
* messages about anything out of the ordinary. If you like #ifdef, you
* will love this function.
*/
static void __init rcu_bootup_announce_oddness(void)
{
#ifdef CONFIG_RCU_TRACE
printk(KERN_INFO "\tRCU debugfs-based tracing is enabled.\n");
#endif
#if (defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 64) || (!defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 32)
printk(KERN_INFO "\tCONFIG_RCU_FANOUT set to non-default value of %d\n",
CONFIG_RCU_FANOUT);
#endif
#ifdef CONFIG_RCU_FANOUT_EXACT
printk(KERN_INFO "\tHierarchical RCU autobalancing is disabled.\n");
#endif
#ifdef CONFIG_RCU_FAST_NO_HZ
printk(KERN_INFO
"\tRCU dyntick-idle grace-period acceleration is enabled.\n");
#endif
#ifdef CONFIG_PROVE_RCU
printk(KERN_INFO "\tRCU lockdep checking is enabled.\n");
#endif
#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
#endif
#if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
printk(KERN_INFO "\tDump stacks of tasks blocking RCU-preempt GP.\n");
#endif
#if defined(CONFIG_RCU_CPU_STALL_INFO)
printk(KERN_INFO "\tAdditional per-CPU info printed with stalls.\n");
#endif
#if NUM_RCU_LVL_4 != 0
printk(KERN_INFO "\tFour-level hierarchy is enabled.\n");
#endif
if (rcu_fanout_leaf != CONFIG_RCU_FANOUT_LEAF)
printk(KERN_INFO "\tExperimental boot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
printk(KERN_INFO "\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
#ifdef CONFIG_RCU_NOCB_CPU
#ifndef CONFIG_RCU_NOCB_CPU_NONE
if (!have_rcu_nocb_mask) {
alloc_bootmem_cpumask_var(&rcu_nocb_mask);
have_rcu_nocb_mask = true;
}
#ifdef CONFIG_RCU_NOCB_CPU_ZERO
pr_info("\tExperimental no-CBs CPU 0\n");
cpumask_set_cpu(0, rcu_nocb_mask);
#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ZERO */
#ifdef CONFIG_RCU_NOCB_CPU_ALL
pr_info("\tExperimental no-CBs for all CPUs\n");
cpumask_setall(rcu_nocb_mask);
#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ALL */
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_NONE */
if (have_rcu_nocb_mask) {
cpulist_scnprintf(nocb_buf, sizeof(nocb_buf), rcu_nocb_mask);
pr_info("\tExperimental no-CBs CPUs: %s.\n", nocb_buf);
if (rcu_nocb_poll)
pr_info("\tExperimental polled no-CBs CPUs.\n");
}
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
}
#ifdef CONFIG_TREE_PREEMPT_RCU
struct rcu_state rcu_preempt_state =
RCU_STATE_INITIALIZER(rcu_preempt, 'p', call_rcu);
DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
static struct rcu_state *rcu_state = &rcu_preempt_state;
static int rcu_preempted_readers_exp(struct rcu_node *rnp);
/*
* Tell them what RCU they are running.
*/
static void __init rcu_bootup_announce(void)
{
printk(KERN_INFO "Preemptible hierarchical RCU implementation.\n");
rcu_bootup_announce_oddness();
}
/*
* Return the number of RCU-preempt batches processed thus far
* for debug and statistics.
*/
long rcu_batches_completed_preempt(void)
{
return rcu_preempt_state.completed;
}
EXPORT_SYMBOL_GPL(rcu_batches_completed_preempt);
/*
* Return the number of RCU batches processed thus far for debug & stats.
*/
long rcu_batches_completed(void)
{
return rcu_batches_completed_preempt();
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);
/*
* Force a quiescent state for preemptible RCU.
*/
void rcu_force_quiescent_state(void)
{
force_quiescent_state(&rcu_preempt_state);
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
* Record a preemptible-RCU quiescent state for the specified CPU. Note
* that this just means that the task currently running on the CPU is
* not in a quiescent state. There might be any number of tasks blocked
* while in an RCU read-side critical section.
*
* Unlike the other rcu_*_qs() functions, callers to this function
* must disable irqs in order to protect the assignment to
* ->rcu_read_unlock_special.
*/
static void rcu_preempt_qs(int cpu)
{
struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
if (rdp->passed_quiesce == 0)
trace_rcu_grace_period("rcu_preempt", rdp->gpnum, "cpuqs");
rdp->passed_quiesce = 1;
current->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
}
/*
* We have entered the scheduler, and the current task might soon be
* context-switched away from. If this task is in an RCU read-side
* critical section, we will no longer be able to rely on the CPU to
* record that fact, so we enqueue the task on the blkd_tasks list.
* The task will dequeue itself when it exits the outermost enclosing
* RCU read-side critical section. Therefore, the current grace period
* cannot be permitted to complete until the blkd_tasks list entries
* predating the current grace period drain, in other words, until
* rnp->gp_tasks becomes NULL.
*
* Caller must disable preemption.
*/
static void rcu_preempt_note_context_switch(int cpu)
{
struct task_struct *t = current;
unsigned long flags;
struct rcu_data *rdp;
struct rcu_node *rnp;
if (t->rcu_read_lock_nesting > 0 &&
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
t->rcu_blocked_node = rnp;
/*
* If this CPU has already checked in, then this task
* will hold up the next grace period rather than the
* current grace period. Queue the task accordingly.
* If the task is queued for the current grace period
* (i.e., this CPU has not yet passed through a quiescent
* state for the current grace period), then as long
* as that task remains queued, the current grace period
* cannot end. Note that there is some uncertainty as
* to exactly when the current grace period started.
* We take a conservative approach, which can result
* in unnecessarily waiting on tasks that started very
* slightly after the current grace period began. C'est
* la vie!!!
*
* But first, note that the current CPU must still be
* on line!
*/
WARN_ON_ONCE((rdp->grpmask & rnp->qsmaskinit) == 0);
WARN_ON_ONCE(!list_empty(&t->rcu_node_entry));
if ((rnp->qsmask & rdp->grpmask) && rnp->gp_tasks != NULL) {
list_add(&t->rcu_node_entry, rnp->gp_tasks->prev);
rnp->gp_tasks = &t->rcu_node_entry;
#ifdef CONFIG_RCU_BOOST
if (rnp->boost_tasks != NULL)
rnp->boost_tasks = rnp->gp_tasks;
#endif /* #ifdef CONFIG_RCU_BOOST */
} else {
list_add(&t->rcu_node_entry, &rnp->blkd_tasks);
if (rnp->qsmask & rdp->grpmask)
rnp->gp_tasks = &t->rcu_node_entry;
}
trace_rcu_preempt_task(rdp->rsp->name,
t->pid,
(rnp->qsmask & rdp->grpmask)
? rnp->gpnum
: rnp->gpnum + 1);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
} else if (t->rcu_read_lock_nesting < 0 &&
t->rcu_read_unlock_special) {
/*
* Complete exit from RCU read-side critical section on
* behalf of preempted instance of __rcu_read_unlock().
*/
rcu_read_unlock_special(t);
}
/*
* Either we were not in an RCU read-side critical section to
* begin with, or we have now recorded that critical section
* globally. Either way, we can now note a quiescent state
* for this CPU. Again, if we were in an RCU read-side critical
* section, and if that critical section was blocking the current
* grace period, then the fact that the task has been enqueued
* means that we continue to block the current grace period.
*/
local_irq_save(flags);
rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
/*
* Check for preempted RCU readers blocking the current grace period
* for the specified rcu_node structure. If the caller needs a reliable
* answer, it must hold the rcu_node's ->lock.
*/
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
return rnp->gp_tasks != NULL;
}
/*
* Record a quiescent state for all tasks that were previously queued
* on the specified rcu_node structure and that were blocking the current
* RCU grace period. The caller must hold the specified rnp->lock with
* irqs disabled, and this lock is released upon return, but irqs remain
* disabled.
*/
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
__releases(rnp->lock)
{
unsigned long mask;
struct rcu_node *rnp_p;
if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return; /* Still need more quiescent states! */
}
rnp_p = rnp->parent;
if (rnp_p == NULL) {
/*
* Either there is only one rcu_node in the tree,
* or tasks were kicked up to root rcu_node due to
* CPUs going offline.
*/
rcu_report_qs_rsp(&rcu_preempt_state, flags);
return;
}
/* Report up the rest of the hierarchy. */
mask = rnp->grpmask;
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
raw_spin_lock(&rnp_p->lock); /* irqs already disabled. */
rcu_report_qs_rnp(mask, &rcu_preempt_state, rnp_p, flags);
}
/*
* Advance a ->blkd_tasks-list pointer to the next entry, instead
* returning NULL if at the end of the list.
*/
static struct list_head *rcu_next_node_entry(struct task_struct *t,
struct rcu_node *rnp)
{
struct list_head *np;
np = t->rcu_node_entry.next;
if (np == &rnp->blkd_tasks)
np = NULL;
return np;
}
/*
* Handle special cases during rcu_read_unlock(), such as needing to
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
*/
void rcu_read_unlock_special(struct task_struct *t)
{
int empty;
int empty_exp;
int empty_exp_now;
unsigned long flags;
struct list_head *np;
#ifdef CONFIG_RCU_BOOST
struct rt_mutex *rbmp = NULL;
#endif /* #ifdef CONFIG_RCU_BOOST */
struct rcu_node *rnp;
int special;
/* NMI handlers cannot block and cannot safely manipulate state. */
if (in_nmi())
return;
local_irq_save(flags);
/*
* If RCU core is waiting for this CPU to exit critical section,
* let it know that we have done so.
*/
special = t->rcu_read_unlock_special;
if (special & RCU_READ_UNLOCK_NEED_QS) {
rcu_preempt_qs(smp_processor_id());
}
/* Hardware IRQ handlers cannot block. */
if (in_irq() || in_serving_softirq()) {
local_irq_restore(flags);
return;
}
/* Clean up if blocked during RCU read-side critical section. */
if (special & RCU_READ_UNLOCK_BLOCKED) {
t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BLOCKED;
/*
* Remove this task from the list it blocked on. The
* task can migrate while we acquire the lock, but at
* most one time. So at most two passes through loop.
*/
for (;;) {
rnp = t->rcu_blocked_node;
raw_spin_lock(&rnp->lock); /* irqs already disabled. */
if (rnp == t->rcu_blocked_node)
break;
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
empty = !rcu_preempt_blocked_readers_cgp(rnp);
empty_exp = !rcu_preempted_readers_exp(rnp);
smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
np = rcu_next_node_entry(t, rnp);
list_del_init(&t->rcu_node_entry);
t->rcu_blocked_node = NULL;
trace_rcu_unlock_preempted_task("rcu_preempt",
rnp->gpnum, t->pid);
if (&t->rcu_node_entry == rnp->gp_tasks)
rnp->gp_tasks = np;
if (&t->rcu_node_entry == rnp->exp_tasks)
rnp->exp_tasks = np;
#ifdef CONFIG_RCU_BOOST
if (&t->rcu_node_entry == rnp->boost_tasks)
rnp->boost_tasks = np;
/* Snapshot/clear ->rcu_boost_mutex with rcu_node lock held. */
if (t->rcu_boost_mutex) {
rbmp = t->rcu_boost_mutex;
t->rcu_boost_mutex = NULL;
}
#endif /* #ifdef CONFIG_RCU_BOOST */
/*
* If this was the last task on the current list, and if
* we aren't waiting on any CPUs, report the quiescent state.
* Note that rcu_report_unblock_qs_rnp() releases rnp->lock,
* so we must take a snapshot of the expedited state.
*/
empty_exp_now = !rcu_preempted_readers_exp(rnp);
if (!empty && !rcu_preempt_blocked_readers_cgp(rnp)) {
trace_rcu_quiescent_state_report("preempt_rcu",
rnp->gpnum,
0, rnp->qsmask,
rnp->level,
rnp->grplo,
rnp->grphi,
!!rnp->gp_tasks);
rcu_report_unblock_qs_rnp(rnp, flags);
} else {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
#ifdef CONFIG_RCU_BOOST
/* Unboost if we were boosted. */
if (rbmp)
rt_mutex_unlock(rbmp);
#endif /* #ifdef CONFIG_RCU_BOOST */
/*
* If this was the last task on the expedited lists,
* then we need to report up the rcu_node hierarchy.
*/
if (!empty_exp && empty_exp_now)
rcu_report_exp_rnp(&rcu_preempt_state, rnp, true);
} else {
local_irq_restore(flags);
}
}
#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
/*
* Dump detailed information for all tasks blocking the current RCU
* grace period on the specified rcu_node structure.
*/
static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
{
unsigned long flags;
struct task_struct *t;
raw_spin_lock_irqsave(&rnp->lock, flags);
if (!rcu_preempt_blocked_readers_cgp(rnp)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return;
}
t = list_entry(rnp->gp_tasks,
struct task_struct, rcu_node_entry);
list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
sched_show_task(t);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
/*
* Dump detailed information for all tasks blocking the current RCU
* grace period.
*/
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
struct rcu_node *rnp = rcu_get_root(rsp);
rcu_print_detail_task_stall_rnp(rnp);
rcu_for_each_leaf_node(rsp, rnp)
rcu_print_detail_task_stall_rnp(rnp);
}
#else /* #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
}
#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
#ifdef CONFIG_RCU_CPU_STALL_INFO
static void rcu_print_task_stall_begin(struct rcu_node *rnp)
{
printk(KERN_ERR "\tTasks blocked on level-%d rcu_node (CPUs %d-%d):",
rnp->level, rnp->grplo, rnp->grphi);
}
static void rcu_print_task_stall_end(void)
{
printk(KERN_CONT "\n");
}
#else /* #ifdef CONFIG_RCU_CPU_STALL_INFO */
static void rcu_print_task_stall_begin(struct rcu_node *rnp)
{
}
static void rcu_print_task_stall_end(void)
{
}
#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_INFO */
/*
* Scan the current list of tasks blocked within RCU read-side critical
* sections, printing out the tid of each.
*/
static int rcu_print_task_stall(struct rcu_node *rnp)
{
struct task_struct *t;
int ndetected = 0;
if (!rcu_preempt_blocked_readers_cgp(rnp))
return 0;
rcu_print_task_stall_begin(rnp);
t = list_entry(rnp->gp_tasks,
struct task_struct, rcu_node_entry);
list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) {
printk(KERN_CONT " P%d", t->pid);
ndetected++;
}
rcu_print_task_stall_end();
return ndetected;
}
/*
* Check that the list of blocked tasks for the newly completed grace
* period is in fact empty. It is a serious bug to complete a grace
* period that still has RCU readers blocked! This function must be
* invoked -before- updating this rnp's ->gpnum, and the rnp's ->lock
* must be held by the caller.
*
* Also, if there are blocked tasks on the list, they automatically
* block the newly created grace period, so set up ->gp_tasks accordingly.
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp(rnp));
if (!list_empty(&rnp->blkd_tasks))
rnp->gp_tasks = rnp->blkd_tasks.next;
WARN_ON_ONCE(rnp->qsmask);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* Handle tasklist migration for case in which all CPUs covered by the
* specified rcu_node have gone offline. Move them up to the root
* rcu_node. The reason for not just moving them to the immediate
* parent is to remove the need for rcu_read_unlock_special() to
* make more than two attempts to acquire the target rcu_node's lock.
* Returns true if there were tasks blocking the current RCU grace
* period.
*
* Returns 1 if there was previously a task blocking the current grace
* period on the specified rcu_node structure.
*
* The caller must hold rnp->lock with irqs disabled.
*/
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
struct rcu_node *rnp,
struct rcu_data *rdp)
{
struct list_head *lp;
struct list_head *lp_root;
int retval = 0;
struct rcu_node *rnp_root = rcu_get_root(rsp);
struct task_struct *t;
if (rnp == rnp_root) {
WARN_ONCE(1, "Last CPU thought to be offlined?");
return 0; /* Shouldn't happen: at least one CPU online. */
}
/* If we are on an internal node, complain bitterly. */
WARN_ON_ONCE(rnp != rdp->mynode);
/*
* Move tasks up to root rcu_node. Don't try to get fancy for
* this corner-case operation -- just put this node's tasks
* at the head of the root node's list, and update the root node's
* ->gp_tasks and ->exp_tasks pointers to those of this node's,
* if non-NULL. This might result in waiting for more tasks than
* absolutely necessary, but this is a good performance/complexity
* tradeoff.
*/
if (rcu_preempt_blocked_readers_cgp(rnp) && rnp->qsmask == 0)
retval |= RCU_OFL_TASKS_NORM_GP;
if (rcu_preempted_readers_exp(rnp))
retval |= RCU_OFL_TASKS_EXP_GP;
lp = &rnp->blkd_tasks;
lp_root = &rnp_root->blkd_tasks;
while (!list_empty(lp)) {
t = list_entry(lp->next, typeof(*t), rcu_node_entry);
raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
list_del(&t->rcu_node_entry);
t->rcu_blocked_node = rnp_root;
list_add(&t->rcu_node_entry, lp_root);
if (&t->rcu_node_entry == rnp->gp_tasks)
rnp_root->gp_tasks = rnp->gp_tasks;
if (&t->rcu_node_entry == rnp->exp_tasks)
rnp_root->exp_tasks = rnp->exp_tasks;
#ifdef CONFIG_RCU_BOOST
if (&t->rcu_node_entry == rnp->boost_tasks)
rnp_root->boost_tasks = rnp->boost_tasks;
#endif /* #ifdef CONFIG_RCU_BOOST */
raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
}
rnp->gp_tasks = NULL;
rnp->exp_tasks = NULL;
#ifdef CONFIG_RCU_BOOST
rnp->boost_tasks = NULL;
/*
* In case root is being boosted and leaf was not. Make sure
* that we boost the tasks blocking the current grace period
* in this case.
*/
raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
if (rnp_root->boost_tasks != NULL &&
rnp_root->boost_tasks != rnp_root->gp_tasks &&
rnp_root->boost_tasks != rnp_root->exp_tasks)
rnp_root->boost_tasks = rnp_root->gp_tasks;
raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
#endif /* #ifdef CONFIG_RCU_BOOST */
return retval;
}
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
* Check for a quiescent state from the current CPU. When a task blocks,
* the task is recorded in the corresponding CPU's rcu_node structure,
* which is checked elsewhere.
*
* Caller must disable hard irqs.
*/
static void rcu_preempt_check_callbacks(int cpu)
{
struct task_struct *t = current;
if (t->rcu_read_lock_nesting == 0) {
rcu_preempt_qs(cpu);
return;
}
if (t->rcu_read_lock_nesting > 0 &&
per_cpu(rcu_preempt_data, cpu).qs_pending)
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
}
#ifdef CONFIG_RCU_BOOST
static void rcu_preempt_do_callbacks(void)
{
rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data));
}
#endif /* #ifdef CONFIG_RCU_BOOST */
/*
* Queue a preemptible-RCU callback for invocation after a grace period.
*/
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
{
__call_rcu(head, func, &rcu_preempt_state, -1, 0);
}
EXPORT_SYMBOL_GPL(call_rcu);
/*
* Queue an RCU callback for lazy invocation after a grace period.
* This will likely be later named something like "call_rcu_lazy()",
* but this change will require some way of tagging the lazy RCU
* callbacks in the list of pending callbacks. Until then, this
* function may only be called from __kfree_rcu().
*/
void kfree_call_rcu(struct rcu_head *head,
void (*func)(struct rcu_head *rcu))
{
__call_rcu(head, func, &rcu_preempt_state, -1, 1);
}
EXPORT_SYMBOL_GPL(kfree_call_rcu);
/**
* synchronize_rcu - wait until a grace period has elapsed.
*
* Control will return to the caller some time after a full grace
* period has elapsed, in other words after all currently executing RCU
* read-side critical sections have completed. Note, however, that
* upon return from synchronize_rcu(), the caller might well be executing
* concurrently with new RCU read-side critical sections that began while
* synchronize_rcu() was waiting. RCU read-side critical sections are
* delimited by rcu_read_lock() and rcu_read_unlock(), and may be nested.
*
* See the description of synchronize_sched() for more detailed information
* on memory ordering guarantees.
*/
void synchronize_rcu(void)
{
rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map) &&
!lock_is_held(&rcu_lock_map) &&
!lock_is_held(&rcu_sched_lock_map),
"Illegal synchronize_rcu() in RCU read-side critical section");
if (!rcu_scheduler_active)
return;
if (rcu_expedited)
synchronize_rcu_expedited();
else
wait_rcu_gp(call_rcu);
}
EXPORT_SYMBOL_GPL(synchronize_rcu);
static DECLARE_WAIT_QUEUE_HEAD(sync_rcu_preempt_exp_wq);
static unsigned long sync_rcu_preempt_exp_count;
static DEFINE_MUTEX(sync_rcu_preempt_exp_mutex);
/*
* Return non-zero if there are any tasks in RCU read-side critical
* sections blocking the current preemptible-RCU expedited grace period.
* If there is no preemptible-RCU expedited grace period currently in
* progress, returns zero unconditionally.
*/
static int rcu_preempted_readers_exp(struct rcu_node *rnp)
{
return rnp->exp_tasks != NULL;
}
/*
* return non-zero if there is no RCU expedited grace period in progress
* for the specified rcu_node structure, in other words, if all CPUs and
* tasks covered by the specified rcu_node structure have done their bit
* for the current expedited grace period. Works only for preemptible
* RCU -- other RCU implementation use other means.
*
* Caller must hold sync_rcu_preempt_exp_mutex.
*/
static int sync_rcu_preempt_exp_done(struct rcu_node *rnp)
{
return !rcu_preempted_readers_exp(rnp) &&
ACCESS_ONCE(rnp->expmask) == 0;
}
/*
* Report the exit from RCU read-side critical section for the last task
* that queued itself during or before the current expedited preemptible-RCU
* grace period. This event is reported either to the rcu_node structure on
* which the task was queued or to one of that rcu_node structure's ancestors,
* recursively up the tree. (Calm down, calm down, we do the recursion
* iteratively!)
*
* Most callers will set the "wake" flag, but the task initiating the
* expedited grace period need not wake itself.
*
* Caller must hold sync_rcu_preempt_exp_mutex.
*/
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake)
{
unsigned long flags;
unsigned long mask;
raw_spin_lock_irqsave(&rnp->lock, flags);
for (;;) {
if (!sync_rcu_preempt_exp_done(rnp)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
break;
}
if (rnp->parent == NULL) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
if (wake)
wake_up(&sync_rcu_preempt_exp_wq);
break;
}
mask = rnp->grpmask;
raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
rnp = rnp->parent;
raw_spin_lock(&rnp->lock); /* irqs already disabled */
rnp->expmask &= ~mask;
}
}
/*
* Snapshot the tasks blocking the newly started preemptible-RCU expedited
* grace period for the specified rcu_node structure. If there are no such
* tasks, report it up the rcu_node hierarchy.
*
* Caller must hold sync_rcu_preempt_exp_mutex and must exclude
* CPU hotplug operations.
*/
static void
sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
{
unsigned long flags;
int must_wait = 0;
raw_spin_lock_irqsave(&rnp->lock, flags);
if (list_empty(&rnp->blkd_tasks)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
} else {
rnp->exp_tasks = rnp->blkd_tasks.next;
rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
must_wait = 1;
}
if (!must_wait)
rcu_report_exp_rnp(rsp, rnp, false); /* Don't wake self. */
}
/**
* synchronize_rcu_expedited - Brute-force RCU grace period
*
* Wait for an RCU-preempt grace period, but expedite it. The basic
* idea is to invoke synchronize_sched_expedited() to push all the tasks to
* the ->blkd_tasks lists and wait for this list to drain. This consumes
* significant time on all CPUs and is unfriendly to real-time workloads,
* so is thus not recommended for any sort of common-case code.
* In fact, if you are using synchronize_rcu_expedited() in a loop,
* please restructure your code to batch your updates, and then Use a
* single synchronize_rcu() instead.
*
* Note that it is illegal to call this function while holding any lock
* that is acquired by a CPU-hotplug notifier. And yes, it is also illegal
* to call this function from a CPU-hotplug notifier. Failing to observe
* these restriction will result in deadlock.
*/
void synchronize_rcu_expedited(void)
{
unsigned long flags;
struct rcu_node *rnp;
struct rcu_state *rsp = &rcu_preempt_state;
unsigned long snap;
int trycount = 0;
smp_mb(); /* Caller's modifications seen first by other CPUs. */
snap = ACCESS_ONCE(sync_rcu_preempt_exp_count) + 1;
smp_mb(); /* Above access cannot bleed into critical section. */
/*
* Block CPU-hotplug operations. This means that any CPU-hotplug
* operation that finds an rcu_node structure with tasks in the
* process of being boosted will know that all tasks blocking
* this expedited grace period will already be in the process of
* being boosted. This simplifies the process of moving tasks
* from leaf to root rcu_node structures.
*/
get_online_cpus();
/*
* Acquire lock, falling back to synchronize_rcu() if too many
* lock-acquisition failures. Of course, if someone does the
* expedited grace period for us, just leave.
*/
while (!mutex_trylock(&sync_rcu_preempt_exp_mutex)) {
if (ULONG_CMP_LT(snap,
ACCESS_ONCE(sync_rcu_preempt_exp_count))) {
put_online_cpus();
goto mb_ret; /* Others did our work for us. */
}
if (trycount++ < 10) {
udelay(trycount * num_online_cpus());
} else {
put_online_cpus();
wait_rcu_gp(call_rcu);
return;
}
}
if (ULONG_CMP_LT(snap, ACCESS_ONCE(sync_rcu_preempt_exp_count))) {
put_online_cpus();
goto unlock_mb_ret; /* Others did our work for us. */
}
/* force all RCU readers onto ->blkd_tasks lists. */
synchronize_sched_expedited();
/* Initialize ->expmask for all non-leaf rcu_node structures. */
rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) {
raw_spin_lock_irqsave(&rnp->lock, flags);
rnp->expmask = rnp->qsmaskinit;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
/* Snapshot current state of ->blkd_tasks lists. */
rcu_for_each_leaf_node(rsp, rnp)
sync_rcu_preempt_exp_init(rsp, rnp);
if (NUM_RCU_NODES > 1)
sync_rcu_preempt_exp_init(rsp, rcu_get_root(rsp));
put_online_cpus();
/* Wait for snapshotted ->blkd_tasks lists to drain. */
rnp = rcu_get_root(rsp);
wait_event(sync_rcu_preempt_exp_wq,
sync_rcu_preempt_exp_done(rnp));
/* Clean up and exit. */
smp_mb(); /* ensure expedited GP seen before counter increment. */
ACCESS_ONCE(sync_rcu_preempt_exp_count)++;
unlock_mb_ret:
mutex_unlock(&sync_rcu_preempt_exp_mutex);
mb_ret:
smp_mb(); /* ensure subsequent action seen after grace period. */
}
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
/**
* rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
*
* Note that this primitive does not necessarily wait for an RCU grace period
* to complete. For example, if there are no RCU callbacks queued anywhere
* in the system, then rcu_barrier() is within its rights to return
* immediately, without waiting for anything, much less an RCU grace period.
*/
void rcu_barrier(void)
{
_rcu_barrier(&rcu_preempt_state);
}
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
* Initialize preemptible RCU's state structures.
*/
static void __init __rcu_init_preempt(void)
{
rcu_init_one(&rcu_preempt_state, &rcu_preempt_data);
}
#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
static struct rcu_state *rcu_state = &rcu_sched_state;
/*
* Tell them what RCU they are running.
*/
static void __init rcu_bootup_announce(void)
{
printk(KERN_INFO "Hierarchical RCU implementation.\n");
rcu_bootup_announce_oddness();
}
/*
* Return the number of RCU batches processed thus far for debug & stats.
*/
long rcu_batches_completed(void)
{
return rcu_batches_completed_sched();
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);
/*
* Force a quiescent state for RCU, which, because there is no preemptible
* RCU, becomes the same as rcu-sched.
*/
void rcu_force_quiescent_state(void)
{
rcu_sched_force_quiescent_state();
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
* Because preemptible RCU does not exist, we never have to check for
* CPUs being in quiescent states.
*/
static void rcu_preempt_note_context_switch(int cpu)
{
}
/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
/* Because preemptible RCU does not exist, no quieting of tasks. */
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
{
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
* Because preemptible RCU does not exist, we never have to check for
* tasks blocked within RCU read-side critical sections.
*/
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
}
/*
* Because preemptible RCU does not exist, we never have to check for
* tasks blocked within RCU read-side critical sections.
*/
static int rcu_print_task_stall(struct rcu_node *rnp)
{
return 0;
}
/*
* Because there is no preemptible RCU, there can be no readers blocked,
* so there is no need to check for blocked tasks. So check only for
* bogus qsmask values.
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
WARN_ON_ONCE(rnp->qsmask);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* Because preemptible RCU does not exist, it never needs to migrate
* tasks that were blocked within RCU read-side critical sections, and
* such non-existent tasks cannot possibly have been blocking the current
* grace period.
*/
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
struct rcu_node *rnp,
struct rcu_data *rdp)
{
return 0;
}
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
* Because preemptible RCU does not exist, it never has any callbacks
* to check.
*/
static void rcu_preempt_check_callbacks(int cpu)
{
}
/*
* Queue an RCU callback for lazy invocation after a grace period.
* This will likely be later named something like "call_rcu_lazy()",
* but this change will require some way of tagging the lazy RCU
* callbacks in the list of pending callbacks. Until then, this
* function may only be called from __kfree_rcu().
*
* Because there is no preemptible RCU, we use RCU-sched instead.
*/
void kfree_call_rcu(struct rcu_head *head,
void (*func)(struct rcu_head *rcu))
{
__call_rcu(head, func, &rcu_sched_state, -1, 1);
}
EXPORT_SYMBOL_GPL(kfree_call_rcu);
/*
* Wait for an rcu-preempt grace period, but make it happen quickly.
* But because preemptible RCU does not exist, map to rcu-sched.
*/
void synchronize_rcu_expedited(void)
{
synchronize_sched_expedited();
}
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
#ifdef CONFIG_HOTPLUG_CPU
/*
* Because preemptible RCU does not exist, there is never any need to
* report on tasks preempted in RCU read-side critical sections during
* expedited RCU grace periods.
*/
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake)
{
}
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
* Because preemptible RCU does not exist, rcu_barrier() is just
* another name for rcu_barrier_sched().
*/
void rcu_barrier(void)
{
rcu_barrier_sched();
}
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
* Because preemptible RCU does not exist, it need not be initialized.
*/
static void __init __rcu_init_preempt(void)
{
}
#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
#include "rtmutex_common.h"
#ifdef CONFIG_RCU_TRACE
static void rcu_initiate_boost_trace(struct rcu_node *rnp)
{
if (list_empty(&rnp->blkd_tasks))
rnp->n_balk_blkd_tasks++;
else if (rnp->exp_tasks == NULL && rnp->gp_tasks == NULL)
rnp->n_balk_exp_gp_tasks++;
else if (rnp->gp_tasks != NULL && rnp->boost_tasks != NULL)
rnp->n_balk_boost_tasks++;
else if (rnp->gp_tasks != NULL && rnp->qsmask != 0)
rnp->n_balk_notblocked++;
else if (rnp->gp_tasks != NULL &&
ULONG_CMP_LT(jiffies, rnp->boost_time))
rnp->n_balk_notyet++;
else
rnp->n_balk_nos++;
}
#else /* #ifdef CONFIG_RCU_TRACE */
static void rcu_initiate_boost_trace(struct rcu_node *rnp)
{
}
#endif /* #else #ifdef CONFIG_RCU_TRACE */
static void rcu_wake_cond(struct task_struct *t, int status)
{
/*
* If the thread is yielding, only wake it when this
* is invoked from idle
*/
if (status != RCU_KTHREAD_YIELDING || is_idle_task(current))
wake_up_process(t);
}
/*
* Carry out RCU priority boosting on the task indicated by ->exp_tasks
* or ->boost_tasks, advancing the pointer to the next task in the
* ->blkd_tasks list.
*
* Note that irqs must be enabled: boosting the task can block.
* Returns 1 if there are more tasks needing to be boosted.
*/
static int rcu_boost(struct rcu_node *rnp)
{
unsigned long flags;
struct rt_mutex mtx;
struct task_struct *t;
struct list_head *tb;
if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL)
return 0; /* Nothing left to boost. */
raw_spin_lock_irqsave(&rnp->lock, flags);
/*
* Recheck under the lock: all tasks in need of boosting
* might exit their RCU read-side critical sections on their own.
*/
if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return 0;
}
/*
* Preferentially boost tasks blocking expedited grace periods.
* This cannot starve the normal grace periods because a second
* expedited grace period must boost all blocked tasks, including
* those blocking the pre-existing normal grace period.
*/
if (rnp->exp_tasks != NULL) {
tb = rnp->exp_tasks;
rnp->n_exp_boosts++;
} else {
tb = rnp->boost_tasks;
rnp->n_normal_boosts++;
}
rnp->n_tasks_boosted++;
/*
* We boost task t by manufacturing an rt_mutex that appears to
* be held by task t. We leave a pointer to that rt_mutex where
* task t can find it, and task t will release the mutex when it
* exits its outermost RCU read-side critical section. Then
* simply acquiring this artificial rt_mutex will boost task
* t's priority. (Thanks to tglx for suggesting this approach!)
*
* Note that task t must acquire rnp->lock to remove itself from
* the ->blkd_tasks list, which it will do from exit() if from
* nowhere else. We therefore are guaranteed that task t will
* stay around at least until we drop rnp->lock. Note that
* rnp->lock also resolves races between our priority boosting
* and task t's exiting its outermost RCU read-side critical
* section.
*/
t = container_of(tb, struct task_struct, rcu_node_entry);
rt_mutex_init_proxy_locked(&mtx, t);
t->rcu_boost_mutex = &mtx;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
rt_mutex_lock(&mtx); /* Side effect: boosts task t's priority. */
rt_mutex_unlock(&mtx); /* Keep lockdep happy. */
return ACCESS_ONCE(rnp->exp_tasks) != NULL ||
ACCESS_ONCE(rnp->boost_tasks) != NULL;
}
/*
* Priority-boosting kthread. One per leaf rcu_node and one for the
* root rcu_node.
*/
static int rcu_boost_kthread(void *arg)
{
struct rcu_node *rnp = (struct rcu_node *)arg;
int spincnt = 0;
int more2boost;
trace_rcu_utilization("Start boost kthread@init");
for (;;) {
rnp->boost_kthread_status = RCU_KTHREAD_WAITING;
trace_rcu_utilization("End boost kthread@rcu_wait");
rcu_wait(rnp->boost_tasks || rnp->exp_tasks);
trace_rcu_utilization("Start boost kthread@rcu_wait");
rnp->boost_kthread_status = RCU_KTHREAD_RUNNING;
more2boost = rcu_boost(rnp);
if (more2boost)
spincnt++;
else
spincnt = 0;
if (spincnt > 10) {
rnp->boost_kthread_status = RCU_KTHREAD_YIELDING;
trace_rcu_utilization("End boost kthread@rcu_yield");
schedule_timeout_interruptible(2);
trace_rcu_utilization("Start boost kthread@rcu_yield");
spincnt = 0;
}
}
/* NOTREACHED */
trace_rcu_utilization("End boost kthread@notreached");
return 0;
}
/*
* Check to see if it is time to start boosting RCU readers that are
* blocking the current grace period, and, if so, tell the per-rcu_node
* kthread to start boosting them. If there is an expedited grace
* period in progress, it is always time to boost.
*
* The caller must hold rnp->lock, which this function releases.
* The ->boost_kthread_task is immortal, so we don't need to worry
* about it going away.
*/
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
{
struct task_struct *t;
if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) {
rnp->n_balk_exp_gp_tasks++;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return;
}
if (rnp->exp_tasks != NULL ||
(rnp->gp_tasks != NULL &&
rnp->boost_tasks == NULL &&
rnp->qsmask == 0 &&
ULONG_CMP_GE(jiffies, rnp->boost_time))) {
if (rnp->exp_tasks == NULL)
rnp->boost_tasks = rnp->gp_tasks;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
t = rnp->boost_kthread_task;
if (t)
rcu_wake_cond(t, rnp->boost_kthread_status);
} else {
rcu_initiate_boost_trace(rnp);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
}
/*
* Wake up the per-CPU kthread to invoke RCU callbacks.
*/
static void invoke_rcu_callbacks_kthread(void)
{
unsigned long flags;
local_irq_save(flags);
__this_cpu_write(rcu_cpu_has_work, 1);
if (__this_cpu_read(rcu_cpu_kthread_task) != NULL &&
current != __this_cpu_read(rcu_cpu_kthread_task)) {
rcu_wake_cond(__this_cpu_read(rcu_cpu_kthread_task),
__this_cpu_read(rcu_cpu_kthread_status));
}
local_irq_restore(flags);
}
/*
* Is the current CPU running the RCU-callbacks kthread?
* Caller must have preemption disabled.
*/
static bool rcu_is_callbacks_kthread(void)
{
return __get_cpu_var(rcu_cpu_kthread_task) == current;
}
#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
/*
* Do priority-boost accounting for the start of a new grace period.
*/
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
}
/*
* Create an RCU-boost kthread for the specified node if one does not
* already exist. We only create this kthread for preemptible RCU.
* Returns zero if all is well, a negated errno otherwise.
*/
static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
struct rcu_node *rnp)
{
int rnp_index = rnp - &rsp->node[0];
unsigned long flags;
struct sched_param sp;
struct task_struct *t;
if (&rcu_preempt_state != rsp)
return 0;
if (!rcu_scheduler_fully_active || rnp->qsmaskinit == 0)
return 0;
rsp->boost = 1;
if (rnp->boost_kthread_task != NULL)
return 0;
t = kthread_create(rcu_boost_kthread, (void *)rnp,
"rcub/%d", rnp_index);
if (IS_ERR(t))
return PTR_ERR(t);
raw_spin_lock_irqsave(&rnp->lock, flags);
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_BOOST_PRIO;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
}
static void rcu_kthread_do_work(void)
{
rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
rcu_preempt_do_callbacks();
}
static void rcu_cpu_kthread_setup(unsigned int cpu)
{
struct sched_param sp;
sp.sched_priority = RCU_KTHREAD_PRIO;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
}
static void rcu_cpu_kthread_park(unsigned int cpu)
{
per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
}
static int rcu_cpu_kthread_should_run(unsigned int cpu)
{
return __get_cpu_var(rcu_cpu_has_work);
}
/*
* Per-CPU kernel thread that invokes RCU callbacks. This replaces the
* RCU softirq used in flavors and configurations of RCU that do not
* support RCU priority boosting.
*/
static void rcu_cpu_kthread(unsigned int cpu)
{
unsigned int *statusp = &__get_cpu_var(rcu_cpu_kthread_status);
char work, *workp = &__get_cpu_var(rcu_cpu_has_work);
int spincnt;
for (spincnt = 0; spincnt < 10; spincnt++) {
trace_rcu_utilization("Start CPU kthread@rcu_wait");
local_bh_disable();
*statusp = RCU_KTHREAD_RUNNING;
this_cpu_inc(rcu_cpu_kthread_loops);
local_irq_disable();
work = *workp;
*workp = 0;
local_irq_enable();
if (work)
rcu_kthread_do_work();
local_bh_enable();
if (*workp == 0) {
trace_rcu_utilization("End CPU kthread@rcu_wait");
*statusp = RCU_KTHREAD_WAITING;
return;
}
}
*statusp = RCU_KTHREAD_YIELDING;
trace_rcu_utilization("Start CPU kthread@rcu_yield");
schedule_timeout_interruptible(2);
trace_rcu_utilization("End CPU kthread@rcu_yield");
*statusp = RCU_KTHREAD_WAITING;
}
/*
* Set the per-rcu_node kthread's affinity to cover all CPUs that are
* served by the rcu_node in question. The CPU hotplug lock is still
* held, so the value of rnp->qsmaskinit will be stable.
*
* We don't include outgoingcpu in the affinity set, use -1 if there is
* no outgoing CPU. If there are no CPUs left in the affinity set,
* this function allows the kthread to execute on any CPU.
*/
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
{
struct task_struct *t = rnp->boost_kthread_task;
unsigned long mask = rnp->qsmaskinit;
cpumask_var_t cm;
int cpu;
if (!t)
return;
if (!zalloc_cpumask_var(&cm, GFP_KERNEL))
return;
for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
if ((mask & 0x1) && cpu != outgoingcpu)
cpumask_set_cpu(cpu, cm);
if (cpumask_weight(cm) == 0) {
cpumask_setall(cm);
for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
cpumask_clear_cpu(cpu, cm);
WARN_ON_ONCE(cpumask_weight(cm) == 0);
}
set_cpus_allowed_ptr(t, cm);
free_cpumask_var(cm);
}
static struct smp_hotplug_thread rcu_cpu_thread_spec = {
.store = &rcu_cpu_kthread_task,
.thread_should_run = rcu_cpu_kthread_should_run,
.thread_fn = rcu_cpu_kthread,
.thread_comm = "rcuc/%u",
.setup = rcu_cpu_kthread_setup,
.park = rcu_cpu_kthread_park,
};
/*
* Spawn all kthreads -- called as soon as the scheduler is running.
*/
static int __init rcu_spawn_kthreads(void)
{
struct rcu_node *rnp;
int cpu;
rcu_scheduler_fully_active = 1;
for_each_possible_cpu(cpu)
per_cpu(rcu_cpu_has_work, cpu) = 0;
BUG_ON(smpboot_register_percpu_thread(&rcu_cpu_thread_spec));
rnp = rcu_get_root(rcu_state);
(void)rcu_spawn_one_boost_kthread(rcu_state, rnp);
if (NUM_RCU_NODES > 1) {
rcu_for_each_leaf_node(rcu_state, rnp)
(void)rcu_spawn_one_boost_kthread(rcu_state, rnp);
}
return 0;
}
early_initcall(rcu_spawn_kthreads);
static void __cpuinit rcu_prepare_kthreads(int cpu)
{
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
struct rcu_node *rnp = rdp->mynode;
/* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
if (rcu_scheduler_fully_active)
(void)rcu_spawn_one_boost_kthread(rcu_state, rnp);
}
#else /* #ifdef CONFIG_RCU_BOOST */
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
{
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
static void invoke_rcu_callbacks_kthread(void)
{
WARN_ON_ONCE(1);
}
static bool rcu_is_callbacks_kthread(void)
{
return false;
}
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
}
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
{
}
static int __init rcu_scheduler_really_started(void)
{
rcu_scheduler_fully_active = 1;
return 0;
}
early_initcall(rcu_scheduler_really_started);
static void __cpuinit rcu_prepare_kthreads(int cpu)
{
}
#endif /* #else #ifdef CONFIG_RCU_BOOST */
#if !defined(CONFIG_RCU_FAST_NO_HZ)
/*
* Check to see if any future RCU-related work will need to be done
* by the current CPU, even if none need be done immediately, returning
* 1 if so. This function is part of the RCU implementation; it is -not-
* an exported member of the RCU API.
*
* Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
* any flavor of RCU.
*/
int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
return rcu_cpu_has_callbacks(cpu, NULL);
}
/*
* Because we do not have RCU_FAST_NO_HZ, don't bother cleaning up
* after it.
*/
static void rcu_cleanup_after_idle(int cpu)
{
}
/*
* Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n,
* is nothing.
*/
static void rcu_prepare_for_idle(int cpu)
{
}
/*
* Don't bother keeping a running count of the number of RCU callbacks
* posted because CONFIG_RCU_FAST_NO_HZ=n.
*/
static void rcu_idle_count_callbacks_posted(void)
{
}
#else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */
/*
* This code is invoked when a CPU goes idle, at which point we want
* to have the CPU do everything required for RCU so that it can enter
* the energy-efficient dyntick-idle mode. This is handled by a
* state machine implemented by rcu_prepare_for_idle() below.
*
* The following three proprocessor symbols control this state machine:
*
* RCU_IDLE_GP_DELAY gives the number of jiffies that a CPU is permitted
* to sleep in dyntick-idle mode with RCU callbacks pending. This
* is sized to be roughly one RCU grace period. Those energy-efficiency
* benchmarkers who might otherwise be tempted to set this to a large
* number, be warned: Setting RCU_IDLE_GP_DELAY too high can hang your
* system. And if you are -that- concerned about energy efficiency,
* just power the system down and be done with it!
* RCU_IDLE_LAZY_GP_DELAY gives the number of jiffies that a CPU is
* permitted to sleep in dyntick-idle mode with only lazy RCU
* callbacks pending. Setting this too high can OOM your system.
*
* The values below work well in practice. If future workloads require
* adjustment, they can be converted into kernel config parameters, though
* making the state machine smarter might be a better option.
*/
#define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */
#define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */
static int rcu_idle_gp_delay = RCU_IDLE_GP_DELAY;
module_param(rcu_idle_gp_delay, int, 0644);
static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY;
module_param(rcu_idle_lazy_gp_delay, int, 0644);
extern int tick_nohz_enabled;
/*
* Try to advance callbacks for all flavors of RCU on the current CPU.
* Afterwards, if there are any callbacks ready for immediate invocation,
* return true.
*/
static bool rcu_try_advance_all_cbs(void)
{
bool cbs_ready = false;
struct rcu_data *rdp;
struct rcu_node *rnp;
struct rcu_state *rsp;
for_each_rcu_flavor(rsp) {
rdp = this_cpu_ptr(rsp->rda);
rnp = rdp->mynode;
/*
* Don't bother checking unless a grace period has
* completed since we last checked and there are
* callbacks not yet ready to invoke.
*/
if (rdp->completed != rnp->completed &&
rdp->nxttail[RCU_DONE_TAIL] != rdp->nxttail[RCU_NEXT_TAIL])
rcu_process_gp_end(rsp, rdp);
if (cpu_has_callbacks_ready_to_invoke(rdp))
cbs_ready = true;
}
return cbs_ready;
}
/*
* Allow the CPU to enter dyntick-idle mode unless it has callbacks ready
* to invoke. If the CPU has callbacks, try to advance them. Tell the
* caller to set the timeout based on whether or not there are non-lazy
* callbacks.
*
* The caller must have disabled interrupts.
*/
int rcu_needs_cpu(int cpu, unsigned long *dj)
{
struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
/* Snapshot to detect later posting of non-lazy callback. */
rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
/* If no callbacks, RCU doesn't need the CPU. */
if (!rcu_cpu_has_callbacks(cpu, &rdtp->all_lazy)) {
*dj = ULONG_MAX;
return 0;
}
/* Attempt to advance callbacks. */
if (rcu_try_advance_all_cbs()) {
/* Some ready to invoke, so initiate later invocation. */
invoke_rcu_core();
return 1;
}
rdtp->last_accelerate = jiffies;
/* Request timer delay depending on laziness, and round. */
if (rdtp->all_lazy) {
*dj = round_up(rcu_idle_gp_delay + jiffies,
rcu_idle_gp_delay) - jiffies;
} else {
*dj = round_jiffies(rcu_idle_lazy_gp_delay + jiffies) - jiffies;
}
return 0;
}
/*
* Prepare a CPU for idle from an RCU perspective. The first major task
* is to sense whether nohz mode has been enabled or disabled via sysfs.
* The second major task is to check to see if a non-lazy callback has
* arrived at a CPU that previously had only lazy callbacks. The third
* major task is to accelerate (that is, assign grace-period numbers to)
* any recently arrived callbacks.
*
* The caller must have disabled interrupts.
*/
static void rcu_prepare_for_idle(int cpu)
{
struct rcu_data *rdp;
struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
struct rcu_node *rnp;
struct rcu_state *rsp;
int tne;
/* Handle nohz enablement switches conservatively. */
tne = ACCESS_ONCE(tick_nohz_enabled);
if (tne != rdtp->tick_nohz_enabled_snap) {
if (rcu_cpu_has_callbacks(cpu, NULL))
invoke_rcu_core(); /* force nohz to see update. */
rdtp->tick_nohz_enabled_snap = tne;
return;
}
if (!tne)
return;
/* If this is a no-CBs CPU, no callbacks, just return. */
if (rcu_is_nocb_cpu(cpu))
return;
/*
* If a non-lazy callback arrived at a CPU having only lazy
* callbacks, invoke RCU core for the side-effect of recalculating
* idle duration on re-entry to idle.
*/
if (rdtp->all_lazy &&
rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) {
invoke_rcu_core();
return;
}
/*
* If we have not yet accelerated this jiffy, accelerate all
* callbacks on this CPU.
*/
if (rdtp->last_accelerate == jiffies)
return;
rdtp->last_accelerate = jiffies;
for_each_rcu_flavor(rsp) {
rdp = per_cpu_ptr(rsp->rda, cpu);
if (!*rdp->nxttail[RCU_DONE_TAIL])
continue;
rnp = rdp->mynode;
raw_spin_lock(&rnp->lock); /* irqs already disabled. */
rcu_accelerate_cbs(rsp, rnp, rdp);
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
}
/*
* Clean up for exit from idle. Attempt to advance callbacks based on
* any grace periods that elapsed while the CPU was idle, and if any
* callbacks are now ready to invoke, initiate invocation.
*/
static void rcu_cleanup_after_idle(int cpu)
{
struct rcu_data *rdp;
struct rcu_state *rsp;
if (rcu_is_nocb_cpu(cpu))
return;
rcu_try_advance_all_cbs();
for_each_rcu_flavor(rsp) {
rdp = per_cpu_ptr(rsp->rda, cpu);
if (cpu_has_callbacks_ready_to_invoke(rdp))
invoke_rcu_core();
}
}
/*
* Keep a running count of the number of non-lazy callbacks posted
* on this CPU. This running counter (which is never decremented) allows
* rcu_prepare_for_idle() to detect when something out of the idle loop
* posts a callback, even if an equal number of callbacks are invoked.
* Of course, callbacks should only be posted from within a trace event
* designed to be called from idle or from within RCU_NONIDLE().
*/
static void rcu_idle_count_callbacks_posted(void)
{
__this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
}
/*
* Data for flushing lazy RCU callbacks at OOM time.
*/
static atomic_t oom_callback_count;
static DECLARE_WAIT_QUEUE_HEAD(oom_callback_wq);
/*
* RCU OOM callback -- decrement the outstanding count and deliver the
* wake-up if we are the last one.
*/
static void rcu_oom_callback(struct rcu_head *rhp)
{
if (atomic_dec_and_test(&oom_callback_count))
wake_up(&oom_callback_wq);
}
/*
* Post an rcu_oom_notify callback on the current CPU if it has at
* least one lazy callback. This will unnecessarily post callbacks
* to CPUs that already have a non-lazy callback at the end of their
* callback list, but this is an infrequent operation, so accept some
* extra overhead to keep things simple.
*/
static void rcu_oom_notify_cpu(void *unused)
{
struct rcu_state *rsp;
struct rcu_data *rdp;
for_each_rcu_flavor(rsp) {
rdp = __this_cpu_ptr(rsp->rda);
if (rdp->qlen_lazy != 0) {
atomic_inc(&oom_callback_count);
rsp->call(&rdp->oom_head, rcu_oom_callback);
}
}
}
/*
* If low on memory, ensure that each CPU has a non-lazy callback.
* This will wake up CPUs that have only lazy callbacks, in turn
* ensuring that they free up the corresponding memory in a timely manner.
* Because an uncertain amount of memory will be freed in some uncertain
* timeframe, we do not claim to have freed anything.
*/
static int rcu_oom_notify(struct notifier_block *self,
unsigned long notused, void *nfreed)
{
int cpu;
/* Wait for callbacks from earlier instance to complete. */
wait_event(oom_callback_wq, atomic_read(&oom_callback_count) == 0);
/*
* Prevent premature wakeup: ensure that all increments happen
* before there is a chance of the counter reaching zero.
*/
atomic_set(&oom_callback_count, 1);
get_online_cpus();
for_each_online_cpu(cpu) {
smp_call_function_single(cpu, rcu_oom_notify_cpu, NULL, 1);
cond_resched();
}
put_online_cpus();
/* Unconditionally decrement: no need to wake ourselves up. */
atomic_dec(&oom_callback_count);
return NOTIFY_OK;
}
static struct notifier_block rcu_oom_nb = {
.notifier_call = rcu_oom_notify
};
static int __init rcu_register_oom_notifier(void)
{
register_oom_notifier(&rcu_oom_nb);
return 0;
}
early_initcall(rcu_register_oom_notifier);
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
#ifdef CONFIG_RCU_CPU_STALL_INFO
#ifdef CONFIG_RCU_FAST_NO_HZ
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
unsigned long nlpd = rdtp->nonlazy_posted - rdtp->nonlazy_posted_snap;
sprintf(cp, "last_accelerate: %04lx/%04lx, nonlazy_posted: %ld, %c%c",
rdtp->last_accelerate & 0xffff, jiffies & 0xffff,
ulong2long(nlpd),
rdtp->all_lazy ? 'L' : '.',
rdtp->tick_nohz_enabled_snap ? '.' : 'D');
}
#else /* #ifdef CONFIG_RCU_FAST_NO_HZ */
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
*cp = '\0';
}
#endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */
/* Initiate the stall-info list. */
static void print_cpu_stall_info_begin(void)
{
printk(KERN_CONT "\n");
}
/*
* Print out diagnostic information for the specified stalled CPU.
*
* If the specified CPU is aware of the current RCU grace period
* (flavor specified by rsp), then print the number of scheduling
* clock interrupts the CPU has taken during the time that it has
* been aware. Otherwise, print the number of RCU grace periods
* that this CPU is ignorant of, for example, "1" if the CPU was
* aware of the previous grace period.
*
* Also print out idle and (if CONFIG_RCU_FAST_NO_HZ) idle-entry info.
*/
static void print_cpu_stall_info(struct rcu_state *rsp, int cpu)
{
char fast_no_hz[72];
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_dynticks *rdtp = rdp->dynticks;
char *ticks_title;
unsigned long ticks_value;
if (rsp->gpnum == rdp->gpnum) {
ticks_title = "ticks this GP";
ticks_value = rdp->ticks_this_gp;
} else {
ticks_title = "GPs behind";
ticks_value = rsp->gpnum - rdp->gpnum;
}
print_cpu_stall_fast_no_hz(fast_no_hz, cpu);
printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d softirq=%u/%u %s\n",
cpu, ticks_value, ticks_title,
atomic_read(&rdtp->dynticks) & 0xfff,
rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting,
rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu),
fast_no_hz);
}
/* Terminate the stall-info list. */
static void print_cpu_stall_info_end(void)
{
printk(KERN_ERR "\t");
}
/* Zero ->ticks_this_gp for all flavors of RCU. */
static void zero_cpu_stall_ticks(struct rcu_data *rdp)
{
rdp->ticks_this_gp = 0;
rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id());
}
/* Increment ->ticks_this_gp for all flavors of RCU. */
static void increment_cpu_stall_ticks(void)
{
struct rcu_state *rsp;
for_each_rcu_flavor(rsp)
__this_cpu_ptr(rsp->rda)->ticks_this_gp++;
}
#else /* #ifdef CONFIG_RCU_CPU_STALL_INFO */
static void print_cpu_stall_info_begin(void)
{
printk(KERN_CONT " {");
}
static void print_cpu_stall_info(struct rcu_state *rsp, int cpu)
{
printk(KERN_CONT " %d", cpu);
}
static void print_cpu_stall_info_end(void)
{
printk(KERN_CONT "} ");
}
static void zero_cpu_stall_ticks(struct rcu_data *rdp)
{
}
static void increment_cpu_stall_ticks(void)
{
}
#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_INFO */
#ifdef CONFIG_RCU_NOCB_CPU
/*
* Offload callback processing from the boot-time-specified set of CPUs
* specified by rcu_nocb_mask. For each CPU in the set, there is a
* kthread created that pulls the callbacks from the corresponding CPU,
* waits for a grace period to elapse, and invokes the callbacks.
* The no-CBs CPUs do a wake_up() on their kthread when they insert
* a callback into any empty list, unless the rcu_nocb_poll boot parameter
* has been specified, in which case each kthread actively polls its
* CPU. (Which isn't so great for energy efficiency, but which does
* reduce RCU's overhead on that CPU.)
*
* This is intended to be used in conjunction with Frederic Weisbecker's
* adaptive-idle work, which would seriously reduce OS jitter on CPUs
* running CPU-bound user-mode computations.
*
* Offloading of callback processing could also in theory be used as
* an energy-efficiency measure because CPUs with no RCU callbacks
* queued are more aggressive about entering dyntick-idle mode.
*/
/* Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters. */
static int __init rcu_nocb_setup(char *str)
{
alloc_bootmem_cpumask_var(&rcu_nocb_mask);
have_rcu_nocb_mask = true;
cpulist_parse(str, rcu_nocb_mask);
return 1;
}
__setup("rcu_nocbs=", rcu_nocb_setup);
static int __init parse_rcu_nocb_poll(char *arg)
{
rcu_nocb_poll = 1;
return 0;
}
early_param("rcu_nocb_poll", parse_rcu_nocb_poll);
/*
* Do any no-CBs CPUs need another grace period?
*
* Interrupts must be disabled. If the caller does not hold the root
* rnp_node structure's ->lock, the results are advisory only.
*/
static int rcu_nocb_needs_gp(struct rcu_state *rsp)
{
struct rcu_node *rnp = rcu_get_root(rsp);
return rnp->need_future_gp[(ACCESS_ONCE(rnp->completed) + 1) & 0x1];
}
/*
* Wake up any no-CBs CPUs' kthreads that were waiting on the just-ended
* grace period.
*/
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp)
{
wake_up_all(&rnp->nocb_gp_wq[rnp->completed & 0x1]);
}
/*
* Set the root rcu_node structure's ->need_future_gp field
* based on the sum of those of all rcu_node structures. This does
* double-count the root rcu_node structure's requests, but this
* is necessary to handle the possibility of a rcu_nocb_kthread()
* having awakened during the time that the rcu_node structures
* were being updated for the end of the previous grace period.
*/
static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq)
{
rnp->need_future_gp[(rnp->completed + 1) & 0x1] += nrq;
}
static void rcu_init_one_nocb(struct rcu_node *rnp)
{
init_waitqueue_head(&rnp->nocb_gp_wq[0]);
init_waitqueue_head(&rnp->nocb_gp_wq[1]);
}
/* Is the specified CPU a no-CPUs CPU? */
bool rcu_is_nocb_cpu(int cpu)
{
if (have_rcu_nocb_mask)
return cpumask_test_cpu(cpu, rcu_nocb_mask);
return false;
}
/*
* Enqueue the specified string of rcu_head structures onto the specified
* CPU's no-CBs lists. The CPU is specified by rdp, the head of the
* string by rhp, and the tail of the string by rhtp. The non-lazy/lazy
* counts are supplied by rhcount and rhcount_lazy.
*
* If warranted, also wake up the kthread servicing this CPUs queues.
*/
static void __call_rcu_nocb_enqueue(struct rcu_data *rdp,
struct rcu_head *rhp,
struct rcu_head **rhtp,
int rhcount, int rhcount_lazy)
{
int len;
struct rcu_head **old_rhpp;
struct task_struct *t;
/* Enqueue the callback on the nocb list and update counts. */
old_rhpp = xchg(&rdp->nocb_tail, rhtp);
ACCESS_ONCE(*old_rhpp) = rhp;
atomic_long_add(rhcount, &rdp->nocb_q_count);
atomic_long_add(rhcount_lazy, &rdp->nocb_q_count_lazy);
/* If we are not being polled and there is a kthread, awaken it ... */
t = ACCESS_ONCE(rdp->nocb_kthread);
if (rcu_nocb_poll | !t)
return;
len = atomic_long_read(&rdp->nocb_q_count);
if (old_rhpp == &rdp->nocb_head) {
wake_up(&rdp->nocb_wq); /* ... only if queue was empty ... */
rdp->qlen_last_fqs_check = 0;
} else if (len > rdp->qlen_last_fqs_check + qhimark) {
wake_up_process(t); /* ... or if many callbacks queued. */
rdp->qlen_last_fqs_check = LONG_MAX / 2;
}
return;
}
/*
* This is a helper for __call_rcu(), which invokes this when the normal
* callback queue is inoperable. If this is not a no-CBs CPU, this
* function returns failure back to __call_rcu(), which can complain
* appropriately.
*
* Otherwise, this function queues the callback where the corresponding
* "rcuo" kthread can find it.
*/
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy)
{
if (!rcu_is_nocb_cpu(rdp->cpu))
return 0;
__call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy);
if (__is_kfree_rcu_offset((unsigned long)rhp->func))
trace_rcu_kfree_callback(rdp->rsp->name, rhp,
(unsigned long)rhp->func,
rdp->qlen_lazy, rdp->qlen);
else
trace_rcu_callback(rdp->rsp->name, rhp,
rdp->qlen_lazy, rdp->qlen);
return 1;
}
/*
* Adopt orphaned callbacks on a no-CBs CPU, or return 0 if this is
* not a no-CBs CPU.
*/
static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp,
struct rcu_data *rdp)
{
long ql = rsp->qlen;
long qll = rsp->qlen_lazy;
/* If this is not a no-CBs CPU, tell the caller to do it the old way. */
if (!rcu_is_nocb_cpu(smp_processor_id()))
return 0;
rsp->qlen = 0;
rsp->qlen_lazy = 0;
/* First, enqueue the donelist, if any. This preserves CB ordering. */
if (rsp->orphan_donelist != NULL) {
__call_rcu_nocb_enqueue(rdp, rsp->orphan_donelist,
rsp->orphan_donetail, ql, qll);
ql = qll = 0;
rsp->orphan_donelist = NULL;
rsp->orphan_donetail = &rsp->orphan_donelist;
}
if (rsp->orphan_nxtlist != NULL) {
__call_rcu_nocb_enqueue(rdp, rsp->orphan_nxtlist,
rsp->orphan_nxttail, ql, qll);
ql = qll = 0;
rsp->orphan_nxtlist = NULL;
rsp->orphan_nxttail = &rsp->orphan_nxtlist;
}
return 1;
}
/*
* If necessary, kick off a new grace period, and either way wait
* for a subsequent grace period to complete.
*/
static void rcu_nocb_wait_gp(struct rcu_data *rdp)
{
unsigned long c;
bool d;
unsigned long flags;
struct rcu_node *rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
c = rcu_start_future_gp(rnp, rdp);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
/*
* Wait for the grace period. Do so interruptibly to avoid messing
* up the load average.
*/
trace_rcu_future_gp(rnp, rdp, c, "StartWait");
for (;;) {
wait_event_interruptible(
rnp->nocb_gp_wq[c & 0x1],
(d = ULONG_CMP_GE(ACCESS_ONCE(rnp->completed), c)));
if (likely(d))
break;
flush_signals(current);
trace_rcu_future_gp(rnp, rdp, c, "ResumeWait");
}
trace_rcu_future_gp(rnp, rdp, c, "EndWait");
smp_mb(); /* Ensure that CB invocation happens after GP end. */
}
/*
* Per-rcu_data kthread, but only for no-CBs CPUs. Each kthread invokes
* callbacks queued by the corresponding no-CBs CPU.
*/
static int rcu_nocb_kthread(void *arg)
{
int c, cl;
struct rcu_head *list;
struct rcu_head *next;
struct rcu_head **tail;
struct rcu_data *rdp = arg;
/* Each pass through this loop invokes one batch of callbacks */
for (;;) {
/* If not polling, wait for next batch of callbacks. */
if (!rcu_nocb_poll)
wait_event_interruptible(rdp->nocb_wq, rdp->nocb_head);
list = ACCESS_ONCE(rdp->nocb_head);
if (!list) {
schedule_timeout_interruptible(1);
flush_signals(current);
continue;
}
/*
* Extract queued callbacks, update counts, and wait
* for a grace period to elapse.
*/
ACCESS_ONCE(rdp->nocb_head) = NULL;
tail = xchg(&rdp->nocb_tail, &rdp->nocb_head);
c = atomic_long_xchg(&rdp->nocb_q_count, 0);
cl = atomic_long_xchg(&rdp->nocb_q_count_lazy, 0);
ACCESS_ONCE(rdp->nocb_p_count) += c;
ACCESS_ONCE(rdp->nocb_p_count_lazy) += cl;
rcu_nocb_wait_gp(rdp);
/* Each pass through the following loop invokes a callback. */
trace_rcu_batch_start(rdp->rsp->name, cl, c, -1);
c = cl = 0;
while (list) {
next = list->next;
/* Wait for enqueuing to complete, if needed. */
while (next == NULL && &list->next != tail) {
schedule_timeout_interruptible(1);
next = list->next;
}
debug_rcu_head_unqueue(list);
local_bh_disable();
if (__rcu_reclaim(rdp->rsp->name, list))
cl++;
c++;
local_bh_enable();
list = next;
}
trace_rcu_batch_end(rdp->rsp->name, c, !!list, 0, 0, 1);
ACCESS_ONCE(rdp->nocb_p_count) -= c;
ACCESS_ONCE(rdp->nocb_p_count_lazy) -= cl;
rdp->n_nocbs_invoked += c;
}
return 0;
}
/* Initialize per-rcu_data variables for no-CBs CPUs. */
static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp)
{
rdp->nocb_tail = &rdp->nocb_head;
init_waitqueue_head(&rdp->nocb_wq);
}
/* Create a kthread for each RCU flavor for each no-CBs CPU. */
static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp)
{
int cpu;
struct rcu_data *rdp;
struct task_struct *t;
if (rcu_nocb_mask == NULL)
return;
for_each_cpu(cpu, rcu_nocb_mask) {
rdp = per_cpu_ptr(rsp->rda, cpu);
t = kthread_run(rcu_nocb_kthread, rdp,
"rcuo%c/%d", rsp->abbr, cpu);
BUG_ON(IS_ERR(t));
ACCESS_ONCE(rdp->nocb_kthread) = t;
}
}
/* Prevent __call_rcu() from enqueuing callbacks on no-CBs CPUs */
static bool init_nocb_callback_list(struct rcu_data *rdp)
{
if (rcu_nocb_mask == NULL ||
!cpumask_test_cpu(rdp->cpu, rcu_nocb_mask))
return false;
rdp->nxttail[RCU_NEXT_TAIL] = NULL;
return true;
}
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
static int rcu_nocb_needs_gp(struct rcu_state *rsp)
{
return 0;
}
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp)
{
}
static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq)
{
}
static void rcu_init_one_nocb(struct rcu_node *rnp)
{
}
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy)
{
return 0;
}
static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp,
struct rcu_data *rdp)
{
return 0;
}
static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp)
{
}
static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp)
{
}
static bool init_nocb_callback_list(struct rcu_data *rdp)
{
return false;
}
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
/*
* An adaptive-ticks CPU can potentially execute in kernel mode for an
* arbitrarily long period of time with the scheduling-clock tick turned
* off. RCU will be paying attention to this CPU because it is in the
* kernel, but the CPU cannot be guaranteed to be executing the RCU state
* machine because the scheduling-clock tick has been disabled. Therefore,
* if an adaptive-ticks CPU is failing to respond to the current grace
* period and has not be idle from an RCU perspective, kick it.
*/
static void rcu_kick_nohz_cpu(int cpu)
{
#ifdef CONFIG_NO_HZ_FULL
if (tick_nohz_full_cpu(cpu))
smp_send_reschedule(cpu);
#endif /* #ifdef CONFIG_NO_HZ_FULL */
}