renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 08:44:14 +08:00
Code
eeeb77716f
linux-next/drivers/rtc/rtc-rx6110.c
Rob Herring 48144c2890 rtc: Explicitly include correct DT includes 
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230724205456.767430-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-27 23:31:29 +02:00

514 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for the Epson RTC module RX-6110 SA
*
* Copyright(C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
* Copyright(C) SEIKO EPSON CORPORATION 2013. All rights reserved.
*/
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/of.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
/* RX-6110 Register definitions */
#define RX6110_REG_SEC 0x10
#define RX6110_REG_MIN 0x11
#define RX6110_REG_HOUR 0x12
#define RX6110_REG_WDAY 0x13
#define RX6110_REG_MDAY 0x14
#define RX6110_REG_MONTH 0x15
#define RX6110_REG_YEAR 0x16
#define RX6110_REG_RES1 0x17
#define RX6110_REG_ALMIN 0x18
#define RX6110_REG_ALHOUR 0x19
#define RX6110_REG_ALWDAY 0x1A
#define RX6110_REG_TCOUNT0 0x1B
#define RX6110_REG_TCOUNT1 0x1C
#define RX6110_REG_EXT 0x1D
#define RX6110_REG_FLAG 0x1E
#define RX6110_REG_CTRL 0x1F
#define RX6110_REG_USER0 0x20
#define RX6110_REG_USER1 0x21
#define RX6110_REG_USER2 0x22
#define RX6110_REG_USER3 0x23
#define RX6110_REG_USER4 0x24
#define RX6110_REG_USER5 0x25
#define RX6110_REG_USER6 0x26
#define RX6110_REG_USER7 0x27
#define RX6110_REG_USER8 0x28
#define RX6110_REG_USER9 0x29
#define RX6110_REG_USERA 0x2A
#define RX6110_REG_USERB 0x2B
#define RX6110_REG_USERC 0x2C
#define RX6110_REG_USERD 0x2D
#define RX6110_REG_USERE 0x2E
#define RX6110_REG_USERF 0x2F
#define RX6110_REG_RES2 0x30
#define RX6110_REG_RES3 0x31
#define RX6110_REG_IRQ 0x32
#define RX6110_BIT_ALARM_EN BIT(7)
/* Extension Register (1Dh) bit positions */
#define RX6110_BIT_EXT_TSEL0 BIT(0)
#define RX6110_BIT_EXT_TSEL1 BIT(1)
#define RX6110_BIT_EXT_TSEL2 BIT(2)
#define RX6110_BIT_EXT_WADA BIT(3)
#define RX6110_BIT_EXT_TE BIT(4)
#define RX6110_BIT_EXT_USEL BIT(5)
#define RX6110_BIT_EXT_FSEL0 BIT(6)
#define RX6110_BIT_EXT_FSEL1 BIT(7)
/* Flag Register (1Eh) bit positions */
#define RX6110_BIT_FLAG_VLF BIT(1)
#define RX6110_BIT_FLAG_AF BIT(3)
#define RX6110_BIT_FLAG_TF BIT(4)
#define RX6110_BIT_FLAG_UF BIT(5)
/* Control Register (1Fh) bit positions */
#define RX6110_BIT_CTRL_TBKE BIT(0)
#define RX6110_BIT_CTRL_TBKON BIT(1)
#define RX6110_BIT_CTRL_TSTP BIT(2)
#define RX6110_BIT_CTRL_AIE BIT(3)
#define RX6110_BIT_CTRL_TIE BIT(4)
#define RX6110_BIT_CTRL_UIE BIT(5)
#define RX6110_BIT_CTRL_STOP BIT(6)
#define RX6110_BIT_CTRL_TEST BIT(7)
enum {
RTC_SEC = 0,
RTC_MIN,
RTC_HOUR,
RTC_WDAY,
RTC_MDAY,
RTC_MONTH,
RTC_YEAR,
RTC_NR_TIME
};
#define RX6110_DRIVER_NAME "rx6110"
struct rx6110_data {
struct rtc_device *rtc;
struct regmap *regmap;
};
/**
* rx6110_rtc_tm_to_data - convert rtc_time to native time encoding
*
* @tm: holds date and time
* @data: holds the encoding in rx6110 native form
*/
static int rx6110_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
{
pr_debug("%s: date %ptRr\n", __func__, tm);
/*
* The year in the RTC is a value between 0 and 99.
* Assume that this represents the current century
* and disregard all other values.
*/
if (tm->tm_year < 100 || tm->tm_year >= 200)
return -EINVAL;
data[RTC_SEC] = bin2bcd(tm->tm_sec);
data[RTC_MIN] = bin2bcd(tm->tm_min);
data[RTC_HOUR] = bin2bcd(tm->tm_hour);
data[RTC_WDAY] = BIT(bin2bcd(tm->tm_wday));
data[RTC_MDAY] = bin2bcd(tm->tm_mday);
data[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
data[RTC_YEAR] = bin2bcd(tm->tm_year % 100);
return 0;
}
/**
* rx6110_data_to_rtc_tm - convert native time encoding to rtc_time
*
* @data: holds the encoding in rx6110 native form
* @tm: holds date and time
*/
static int rx6110_data_to_rtc_tm(u8 *data, struct rtc_time *tm)
{
tm->tm_sec = bcd2bin(data[RTC_SEC] & 0x7f);
tm->tm_min = bcd2bin(data[RTC_MIN] & 0x7f);
/* only 24-hour clock */
tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
tm->tm_wday = ffs(data[RTC_WDAY] & 0x7f);
tm->tm_mday = bcd2bin(data[RTC_MDAY] & 0x3f);
tm->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1f) - 1;
tm->tm_year = bcd2bin(data[RTC_YEAR]) + 100;
pr_debug("%s: date %ptRr\n", __func__, tm);
/*
* The year in the RTC is a value between 0 and 99.
* Assume that this represents the current century
* and disregard all other values.
*/
if (tm->tm_year < 100 || tm->tm_year >= 200)
return -EINVAL;
return 0;
}
/**
* rx6110_set_time - set the current time in the rx6110 registers
*
* @dev: the rtc device in use
* @tm: holds date and time
*
* BUG: The HW assumes every year that is a multiple of 4 to be a leap
* year. Next time this is wrong is 2100, which will not be a leap year
*
* Note: If STOP is not set/cleared, the clock will start when the seconds
* register is written
*
*/
static int rx6110_set_time(struct device *dev, struct rtc_time *tm)
{
struct rx6110_data *rx6110 = dev_get_drvdata(dev);
u8 data[RTC_NR_TIME];
int ret;
ret = rx6110_rtc_tm_to_data(tm, data);
if (ret < 0)
return ret;
/* set STOP bit before changing clock/calendar */
ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
RX6110_BIT_CTRL_STOP, RX6110_BIT_CTRL_STOP);
if (ret)
return ret;
ret = regmap_bulk_write(rx6110->regmap, RX6110_REG_SEC, data,
RTC_NR_TIME);
if (ret)
return ret;
/* The time in the RTC is valid. Be sure to have VLF cleared. */
ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
RX6110_BIT_FLAG_VLF, 0);
if (ret)
return ret;
/* clear STOP bit after changing clock/calendar */
ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
RX6110_BIT_CTRL_STOP, 0);
return ret;
}
/**
* rx6110_get_time - get the current time from the rx6110 registers
* @dev: the rtc device in use
* @tm: holds date and time
*/
static int rx6110_get_time(struct device *dev, struct rtc_time *tm)
{
struct rx6110_data *rx6110 = dev_get_drvdata(dev);
u8 data[RTC_NR_TIME];
int flags;
int ret;
ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
if (ret)
return -EINVAL;
/* check for VLF Flag (set at power-on) */
if ((flags & RX6110_BIT_FLAG_VLF)) {
dev_warn(dev, "Voltage low, data is invalid.\n");
return -EINVAL;
}
/* read registers to date */
ret = regmap_bulk_read(rx6110->regmap, RX6110_REG_SEC, data,
RTC_NR_TIME);
if (ret)
return ret;
ret = rx6110_data_to_rtc_tm(data, tm);
if (ret)
return ret;
dev_dbg(dev, "%s: date %ptRr\n", __func__, tm);
return 0;
}
static const struct reg_sequence rx6110_default_regs[] = {
{ RX6110_REG_RES1, 0xB8 },
{ RX6110_REG_RES2, 0x00 },
{ RX6110_REG_RES3, 0x10 },
{ RX6110_REG_IRQ, 0x00 },
{ RX6110_REG_ALMIN, 0x00 },
{ RX6110_REG_ALHOUR, 0x00 },
{ RX6110_REG_ALWDAY, 0x00 },
};
/**
* rx6110_init - initialize the rx6110 registers
*
* @rx6110: pointer to the rx6110 struct in use
*
*/
static int rx6110_init(struct rx6110_data *rx6110)
{
struct rtc_device *rtc = rx6110->rtc;
int flags;
int ret;
ret = regmap_update_bits(rx6110->regmap, RX6110_REG_EXT,
RX6110_BIT_EXT_TE, 0);
if (ret)
return ret;
ret = regmap_register_patch(rx6110->regmap, rx6110_default_regs,
ARRAY_SIZE(rx6110_default_regs));
if (ret)
return ret;
ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
if (ret)
return ret;
/* check for VLF Flag (set at power-on) */
if ((flags & RX6110_BIT_FLAG_VLF))
dev_warn(&rtc->dev, "Voltage low, data loss detected.\n");
/* check for Alarm Flag */
if (flags & RX6110_BIT_FLAG_AF)
dev_warn(&rtc->dev, "An alarm may have been missed.\n");
/* check for Periodic Timer Flag */
if (flags & RX6110_BIT_FLAG_TF)
dev_warn(&rtc->dev, "Periodic timer was detected\n");
/* check for Update Timer Flag */
if (flags & RX6110_BIT_FLAG_UF)
dev_warn(&rtc->dev, "Update timer was detected\n");
/* clear all flags BUT VLF */
ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
RX6110_BIT_FLAG_AF |
RX6110_BIT_FLAG_UF |
RX6110_BIT_FLAG_TF,
0);
return ret;
}
static const struct rtc_class_ops rx6110_rtc_ops = {
.read_time = rx6110_get_time,
.set_time = rx6110_set_time,
};
static int rx6110_probe(struct rx6110_data *rx6110, struct device *dev)
{
int err;
rx6110->rtc = devm_rtc_device_register(dev,
RX6110_DRIVER_NAME,
&rx6110_rtc_ops, THIS_MODULE);
if (IS_ERR(rx6110->rtc))
return PTR_ERR(rx6110->rtc);
err = rx6110_init(rx6110);
if (err)
return err;
rx6110->rtc->max_user_freq = 1;
return 0;
}
#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct regmap_config regmap_spi_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = RX6110_REG_IRQ,
.read_flag_mask = 0x80,
};
/**
* rx6110_spi_probe - initialize rtc driver
* @spi: pointer to spi device
*/
static int rx6110_spi_probe(struct spi_device *spi)
{
struct rx6110_data *rx6110;
if ((spi->bits_per_word && spi->bits_per_word != 8) ||
(spi->max_speed_hz > 2000000) ||
(spi->mode != (SPI_CS_HIGH | SPI_CPOL | SPI_CPHA))) {
dev_warn(&spi->dev, "SPI settings: bits_per_word: %d, max_speed_hz: %d, mode: %xh\n",
spi->bits_per_word, spi->max_speed_hz, spi->mode);
dev_warn(&spi->dev, "driving device in an unsupported mode");
}
rx6110 = devm_kzalloc(&spi->dev, sizeof(*rx6110), GFP_KERNEL);
if (!rx6110)
return -ENOMEM;
rx6110->regmap = devm_regmap_init_spi(spi, &regmap_spi_config);
if (IS_ERR(rx6110->regmap)) {
dev_err(&spi->dev, "regmap init failed for rtc rx6110\n");
return PTR_ERR(rx6110->regmap);
}
spi_set_drvdata(spi, rx6110);
return rx6110_probe(rx6110, &spi->dev);
}
static const struct spi_device_id rx6110_spi_id[] = {
{ "rx6110", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, rx6110_spi_id);
static const __maybe_unused struct of_device_id rx6110_spi_of_match[] = {
{ .compatible = "epson,rx6110" },
{ },
};
MODULE_DEVICE_TABLE(of, rx6110_spi_of_match);
static struct spi_driver rx6110_spi_driver = {
.driver = {
.name = RX6110_DRIVER_NAME,
.of_match_table = of_match_ptr(rx6110_spi_of_match),
},
.probe = rx6110_spi_probe,
.id_table = rx6110_spi_id,
};
static int rx6110_spi_register(void)
{
return spi_register_driver(&rx6110_spi_driver);
}
static void rx6110_spi_unregister(void)
{
spi_unregister_driver(&rx6110_spi_driver);
}
#else
static int rx6110_spi_register(void)
{
return 0;
}
static void rx6110_spi_unregister(void)
{
}
#endif /* CONFIG_SPI_MASTER */
#if IS_ENABLED(CONFIG_I2C)
static struct regmap_config regmap_i2c_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = RX6110_REG_IRQ,
.read_flag_mask = 0x80,
};
static int rx6110_i2c_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
struct rx6110_data *rx6110;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_I2C_BLOCK)) {
dev_err(&adapter->dev,
"doesn't support required functionality\n");
return -EIO;
}
rx6110 = devm_kzalloc(&client->dev, sizeof(*rx6110), GFP_KERNEL);
if (!rx6110)
return -ENOMEM;
rx6110->regmap = devm_regmap_init_i2c(client, &regmap_i2c_config);
if (IS_ERR(rx6110->regmap)) {
dev_err(&client->dev, "regmap init failed for rtc rx6110\n");
return PTR_ERR(rx6110->regmap);
}
i2c_set_clientdata(client, rx6110);
return rx6110_probe(rx6110, &client->dev);
}
static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
{ "SECC6110" },
{ }
};
MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
static const struct i2c_device_id rx6110_i2c_id[] = {
{ "rx6110", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
static struct i2c_driver rx6110_i2c_driver = {
.driver = {
.name = RX6110_DRIVER_NAME,
.acpi_match_table = rx6110_i2c_acpi_match,
},
.probe = rx6110_i2c_probe,
.id_table = rx6110_i2c_id,
};
static int rx6110_i2c_register(void)
{
return i2c_add_driver(&rx6110_i2c_driver);
}
static void rx6110_i2c_unregister(void)
{
i2c_del_driver(&rx6110_i2c_driver);
}
#else
static int rx6110_i2c_register(void)
{
return 0;
}
static void rx6110_i2c_unregister(void)
{
}
#endif /* CONFIG_I2C */
static int __init rx6110_module_init(void)
{
int ret;
ret = rx6110_spi_register();
if (ret)
return ret;
ret = rx6110_i2c_register();
if (ret)
rx6110_spi_unregister();
return ret;
}
module_init(rx6110_module_init);
static void __exit rx6110_module_exit(void)
{
rx6110_spi_unregister();
rx6110_i2c_unregister();
}
module_exit(rx6110_module_exit);
MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>");
MODULE_DESCRIPTION("RX-6110 SA RTC driver");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink