2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
linux-next/drivers/usb/cdns3/cdns3-imx.c
Peter Chen 1e056efab9 usb: cdns3: add NXP imx8qm glue layer
There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns
core is the child for this glue layer device.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15 10:39:22 +01:00

217 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/**
* cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
*
* Copyright (C) 2019 NXP
*/
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/iopoll.h>
#define USB3_CORE_CTRL1 0x00
#define USB3_CORE_CTRL2 0x04
#define USB3_INT_REG 0x08
#define USB3_CORE_STATUS 0x0c
#define XHCI_DEBUG_LINK_ST 0x10
#define XHCI_DEBUG_BUS 0x14
#define USB3_SSPHY_CTRL1 0x40
#define USB3_SSPHY_CTRL2 0x44
#define USB3_SSPHY_STATUS 0x4c
#define USB2_PHY_CTRL1 0x50
#define USB2_PHY_CTRL2 0x54
#define USB2_PHY_STATUS 0x5c
/* Register bits definition */
/* USB3_CORE_CTRL1 */
#define SW_RESET_MASK (0x3f << 26)
#define PWR_SW_RESET BIT(31)
#define APB_SW_RESET BIT(30)
#define AXI_SW_RESET BIT(29)
#define RW_SW_RESET BIT(28)
#define PHY_SW_RESET BIT(27)
#define PHYAHB_SW_RESET BIT(26)
#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
#define OC_DISABLE BIT(9)
#define MDCTRL_CLK_SEL BIT(7)
#define MODE_STRAP_MASK (0x7)
#define DEV_MODE (1 << 2)
#define HOST_MODE (1 << 1)
#define OTG_MODE (1 << 0)
/* USB3_INT_REG */
#define CLK_125_REQ BIT(29)
#define LPM_CLK_REQ BIT(28)
#define DEVU3_WAEKUP_EN BIT(14)
#define OTG_WAKEUP_EN BIT(12)
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
/* USB3_CORE_STATUS */
#define MDCTRL_CLK_STATUS BIT(15)
#define DEV_POWER_ON_READY BIT(13)
#define HOST_POWER_ON_READY BIT(12)
/* USB3_SSPHY_STATUS */
#define CLK_VALID_MASK (0x3f << 26)
#define CLK_VALID_COMPARE_BITS (0xf << 28)
#define PHY_REFCLK_REQ (1 << 0)
struct cdns_imx {
struct device *dev;
void __iomem *noncore;
struct clk_bulk_data *clks;
int num_clks;
};
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
{
return readl(data->noncore + offset);
}
static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
{
writel(value, data->noncore + offset);
}
static const struct clk_bulk_data imx_cdns3_core_clks[] = {
{ .id = "usb3_lpm_clk" },
{ .id = "usb3_bus_clk" },
{ .id = "usb3_aclk" },
{ .id = "usb3_ipg_clk" },
{ .id = "usb3_core_pclk" },
};
static int cdns_imx_noncore_init(struct cdns_imx *data)
{
u32 value;
int ret;
struct device *dev = data->dev;
cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
udelay(1);
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
10, 100000);
if (ret) {
dev_err(dev, "wait clkvld timeout\n");
return ret;
}
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
value |= ALL_SW_RESET;
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
udelay(1);
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
value = cdns_imx_readl(data, USB3_INT_REG);
value |= HOST_INT1_EN | DEV_INT_EN;
cdns_imx_writel(data, USB3_INT_REG, value);
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
value &= ~ALL_SW_RESET;
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
return ret;
}
static int cdns_imx_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct cdns_imx *data;
int ret;
if (!node)
return -ENODEV;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
platform_set_drvdata(pdev, data);
data->dev = dev;
data->noncore = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->noncore)) {
dev_err(dev, "can't map IOMEM resource\n");
return PTR_ERR(data->noncore);
}
data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
if (ret)
return ret;
ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
if (ret)
return ret;
ret = cdns_imx_noncore_init(data);
if (ret)
goto err;
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to create children: %d\n", ret);
goto err;
}
return ret;
err:
clk_bulk_disable_unprepare(data->num_clks, data->clks);
return ret;
}
static int cdns_imx_remove_core(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
platform_device_unregister(pdev);
return 0;
}
static int cdns_imx_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
device_for_each_child(dev, NULL, cdns_imx_remove_core);
platform_set_drvdata(pdev, NULL);
return 0;
}
static const struct of_device_id cdns_imx_of_match[] = {
{ .compatible = "fsl,imx8qm-usb3", },
{},
};
MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
static struct platform_driver cdns_imx_driver = {
.probe = cdns_imx_probe,
.remove = cdns_imx_remove,
.driver = {
.name = "cdns3-imx",
.of_match_table = cdns_imx_of_match,
},
};
module_platform_driver(cdns_imx_driver);
MODULE_ALIAS("platform:cdns3-imx");
MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");