mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 05:04:00 +08:00
f027e0b3a7
The adis_probe_trigger() creates a new IIO trigger and requests an
interrupt associated with the trigger. The interrupt uses the generic
iio_trigger_generic_data_rdy_poll() function as its interrupt handler.
Currently the driver initializes some fields of the trigger structure after
the interrupt has been requested. But an interrupt can fire as soon as it
has been requested. This opens up a race condition.
iio_trigger_generic_data_rdy_poll() will access the trigger data structure
and dereference the ops field. If the ops field is not yet initialized this
will result in a NULL pointer deref.
It is not expected that the device generates an interrupt at this point, so
typically this issue did not surface unless e.g. due to a hardware
misconfiguration (wrong interrupt number, wrong polarity, etc.).
But some newer devices from the ADIS family start to generate periodic
interrupts in their power-on reset configuration and unfortunately the
interrupt can not be masked in the device. This makes the race condition
much more visible and the following crash has been observed occasionally
when booting a system using the ADIS16460.
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257
Hardware name: Xilinx Zynq Platform
task: ef04f640 task.stack: ef050000
PC is at iio_trigger_notify_done+0x30/0x68
LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20
pc : [<c042d868>] lr : [<c042d924>] psr: 60000193
sp : ef051bb8 ip : 00000000 fp : ef106400
r10: c081d80a r9 : ef3bfa00 r8 : 00000087
r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
Control: 18c5387d Table: 0000404a DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xef050210)
[<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118)
[<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58)
[<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c)
[<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130)
[<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c)
[<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4)
[<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c)
[<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8)
To fix this make sure that the trigger is fully initialized before
requesting the interrupt.
Fixes: ccd2b52f4a ("staging:iio: Add common ADIS library")
Reported-by: Robin Getz <Robin.Getz@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
90 lines
2.0 KiB
C
90 lines
2.0 KiB
C
/*
|
|
* Common library for ADIS16XXX devices
|
|
*
|
|
* Copyright 2012 Analog Devices Inc.
|
|
* Author: Lars-Peter Clausen <lars@metafoo.de>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/export.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/imu/adis.h>
|
|
|
|
static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct adis *adis = iio_trigger_get_drvdata(trig);
|
|
|
|
return adis_enable_irq(adis, state);
|
|
}
|
|
|
|
static const struct iio_trigger_ops adis_trigger_ops = {
|
|
.set_trigger_state = &adis_data_rdy_trigger_set_state,
|
|
};
|
|
|
|
/**
|
|
* adis_probe_trigger() - Sets up trigger for a adis device
|
|
* @adis: The adis device
|
|
* @indio_dev: The IIO device
|
|
*
|
|
* Returns 0 on success or a negative error code
|
|
*
|
|
* adis_remove_trigger() should be used to free the trigger.
|
|
*/
|
|
int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
|
|
{
|
|
int ret;
|
|
|
|
adis->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
|
|
indio_dev->id);
|
|
if (adis->trig == NULL)
|
|
return -ENOMEM;
|
|
|
|
adis->trig->dev.parent = &adis->spi->dev;
|
|
adis->trig->ops = &adis_trigger_ops;
|
|
iio_trigger_set_drvdata(adis->trig, adis);
|
|
|
|
ret = request_irq(adis->spi->irq,
|
|
&iio_trigger_generic_data_rdy_poll,
|
|
IRQF_TRIGGER_RISING,
|
|
indio_dev->name,
|
|
adis->trig);
|
|
if (ret)
|
|
goto error_free_trig;
|
|
|
|
ret = iio_trigger_register(adis->trig);
|
|
|
|
indio_dev->trig = iio_trigger_get(adis->trig);
|
|
if (ret)
|
|
goto error_free_irq;
|
|
|
|
return 0;
|
|
|
|
error_free_irq:
|
|
free_irq(adis->spi->irq, adis->trig);
|
|
error_free_trig:
|
|
iio_trigger_free(adis->trig);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(adis_probe_trigger);
|
|
|
|
/**
|
|
* adis_remove_trigger() - Remove trigger for a adis devices
|
|
* @adis: The adis device
|
|
*
|
|
* Removes the trigger previously registered with adis_probe_trigger().
|
|
*/
|
|
void adis_remove_trigger(struct adis *adis)
|
|
{
|
|
iio_trigger_unregister(adis->trig);
|
|
free_irq(adis->spi->irq, adis->trig);
|
|
iio_trigger_free(adis->trig);
|
|
}
|
|
EXPORT_SYMBOL_GPL(adis_remove_trigger);
|