2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-12 07:14:03 +08:00
linux-next/block/blk-settings.c
Kent Overstreet c78afc6261 bcache/md: Use raid stripe size
Now that we've got code for raid5/6 stripe awareness, bcache just needs
to know about the stripes and when writing partial stripes is expensive
- we probably don't want to enable this optimization for raid1 or 10,
even though they have stripes. So add a flag to queue_limits.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00

843 lines
26 KiB
C

/*
* Functions related to setting various queue properties from drivers
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h> /* for max_pfn/max_low_pfn */
#include <linux/gcd.h>
#include <linux/lcm.h>
#include <linux/jiffies.h>
#include <linux/gfp.h>
#include "blk.h"
unsigned long blk_max_low_pfn;
EXPORT_SYMBOL(blk_max_low_pfn);
unsigned long blk_max_pfn;
/**
* blk_queue_prep_rq - set a prepare_request function for queue
* @q: queue
* @pfn: prepare_request function
*
* It's possible for a queue to register a prepare_request callback which
* is invoked before the request is handed to the request_fn. The goal of
* the function is to prepare a request for I/O, it can be used to build a
* cdb from the request data for instance.
*
*/
void blk_queue_prep_rq(struct request_queue *q, prep_rq_fn *pfn)
{
q->prep_rq_fn = pfn;
}
EXPORT_SYMBOL(blk_queue_prep_rq);
/**
* blk_queue_unprep_rq - set an unprepare_request function for queue
* @q: queue
* @ufn: unprepare_request function
*
* It's possible for a queue to register an unprepare_request callback
* which is invoked before the request is finally completed. The goal
* of the function is to deallocate any data that was allocated in the
* prepare_request callback.
*
*/
void blk_queue_unprep_rq(struct request_queue *q, unprep_rq_fn *ufn)
{
q->unprep_rq_fn = ufn;
}
EXPORT_SYMBOL(blk_queue_unprep_rq);
/**
* blk_queue_merge_bvec - set a merge_bvec function for queue
* @q: queue
* @mbfn: merge_bvec_fn
*
* Usually queues have static limitations on the max sectors or segments that
* we can put in a request. Stacking drivers may have some settings that
* are dynamic, and thus we have to query the queue whether it is ok to
* add a new bio_vec to a bio at a given offset or not. If the block device
* has such limitations, it needs to register a merge_bvec_fn to control
* the size of bio's sent to it. Note that a block device *must* allow a
* single page to be added to an empty bio. The block device driver may want
* to use the bio_split() function to deal with these bio's. By default
* no merge_bvec_fn is defined for a queue, and only the fixed limits are
* honored.
*/
void blk_queue_merge_bvec(struct request_queue *q, merge_bvec_fn *mbfn)
{
q->merge_bvec_fn = mbfn;
}
EXPORT_SYMBOL(blk_queue_merge_bvec);
void blk_queue_softirq_done(struct request_queue *q, softirq_done_fn *fn)
{
q->softirq_done_fn = fn;
}
EXPORT_SYMBOL(blk_queue_softirq_done);
void blk_queue_rq_timeout(struct request_queue *q, unsigned int timeout)
{
q->rq_timeout = timeout;
}
EXPORT_SYMBOL_GPL(blk_queue_rq_timeout);
void blk_queue_rq_timed_out(struct request_queue *q, rq_timed_out_fn *fn)
{
q->rq_timed_out_fn = fn;
}
EXPORT_SYMBOL_GPL(blk_queue_rq_timed_out);
void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn)
{
q->lld_busy_fn = fn;
}
EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
/**
* blk_set_default_limits - reset limits to default values
* @lim: the queue_limits structure to reset
*
* Description:
* Returns a queue_limit struct to its default state.
*/
void blk_set_default_limits(struct queue_limits *lim)
{
lim->max_segments = BLK_MAX_SEGMENTS;
lim->max_integrity_segments = 0;
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
lim->max_write_same_sectors = 0;
lim->max_discard_sectors = 0;
lim->discard_granularity = 0;
lim->discard_alignment = 0;
lim->discard_misaligned = 0;
lim->discard_zeroes_data = 0;
lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
lim->alignment_offset = 0;
lim->io_opt = 0;
lim->misaligned = 0;
lim->cluster = 1;
}
EXPORT_SYMBOL(blk_set_default_limits);
/**
* blk_set_stacking_limits - set default limits for stacking devices
* @lim: the queue_limits structure to reset
*
* Description:
* Returns a queue_limit struct to its default state. Should be used
* by stacking drivers like DM that have no internal limits.
*/
void blk_set_stacking_limits(struct queue_limits *lim)
{
blk_set_default_limits(lim);
/* Inherit limits from component devices */
lim->discard_zeroes_data = 1;
lim->max_segments = USHRT_MAX;
lim->max_hw_sectors = UINT_MAX;
lim->max_segment_size = UINT_MAX;
lim->max_sectors = UINT_MAX;
lim->max_write_same_sectors = UINT_MAX;
}
EXPORT_SYMBOL(blk_set_stacking_limits);
/**
* blk_queue_make_request - define an alternate make_request function for a device
* @q: the request queue for the device to be affected
* @mfn: the alternate make_request function
*
* Description:
* The normal way for &struct bios to be passed to a device
* driver is for them to be collected into requests on a request
* queue, and then to allow the device driver to select requests
* off that queue when it is ready. This works well for many block
* devices. However some block devices (typically virtual devices
* such as md or lvm) do not benefit from the processing on the
* request queue, and are served best by having the requests passed
* directly to them. This can be achieved by providing a function
* to blk_queue_make_request().
*
* Caveat:
* The driver that does this *must* be able to deal appropriately
* with buffers in "highmemory". This can be accomplished by either calling
* __bio_kmap_atomic() to get a temporary kernel mapping, or by calling
* blk_queue_bounce() to create a buffer in normal memory.
**/
void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
{
/*
* set defaults
*/
q->nr_requests = BLKDEV_MAX_RQ;
q->make_request_fn = mfn;
blk_queue_dma_alignment(q, 511);
blk_queue_congestion_threshold(q);
q->nr_batching = BLK_BATCH_REQ;
blk_set_default_limits(&q->limits);
/*
* by default assume old behaviour and bounce for any highmem page
*/
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
}
EXPORT_SYMBOL(blk_queue_make_request);
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
* @q: the request queue for the device
* @max_addr: the maximum address the device can handle
*
* Description:
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
* buffers for doing I/O to pages residing above @max_addr.
**/
void blk_queue_bounce_limit(struct request_queue *q, u64 max_addr)
{
unsigned long b_pfn = max_addr >> PAGE_SHIFT;
int dma = 0;
q->bounce_gfp = GFP_NOIO;
#if BITS_PER_LONG == 64
/*
* Assume anything <= 4GB can be handled by IOMMU. Actually
* some IOMMUs can handle everything, but I don't know of a
* way to test this here.
*/
if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->limits.bounce_pfn = max(max_low_pfn, b_pfn);
#else
if (b_pfn < blk_max_low_pfn)
dma = 1;
q->limits.bounce_pfn = b_pfn;
#endif
if (dma) {
init_emergency_isa_pool();
q->bounce_gfp = GFP_NOIO | GFP_DMA;
q->limits.bounce_pfn = b_pfn;
}
}
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
* blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
* @limits: the queue limits
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
* Enables a low level driver to set a hard upper limit,
* max_hw_sectors, on the size of requests. max_hw_sectors is set by
* the device driver based upon the combined capabilities of I/O
* controller and storage device.
*
* max_sectors is a soft limit imposed by the block layer for
* filesystem type requests. This value can be overridden on a
* per-device basis in /sys/block/<device>/queue/max_sectors_kb.
* The soft limit can not exceed max_hw_sectors.
**/
void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
{
if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
printk(KERN_INFO "%s: set to minimum %d\n",
__func__, max_hw_sectors);
}
limits->max_hw_sectors = max_hw_sectors;
limits->max_sectors = min_t(unsigned int, max_hw_sectors,
BLK_DEF_MAX_SECTORS);
}
EXPORT_SYMBOL(blk_limits_max_hw_sectors);
/**
* blk_queue_max_hw_sectors - set max sectors for a request for this queue
* @q: the request queue for the device
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
* See description for blk_limits_max_hw_sectors().
**/
void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
/**
* blk_queue_max_discard_sectors - set max sectors for a single discard
* @q: the request queue for the device
* @max_discard_sectors: maximum number of sectors to discard
**/
void blk_queue_max_discard_sectors(struct request_queue *q,
unsigned int max_discard_sectors)
{
q->limits.max_discard_sectors = max_discard_sectors;
}
EXPORT_SYMBOL(blk_queue_max_discard_sectors);
/**
* blk_queue_max_write_same_sectors - set max sectors for a single write same
* @q: the request queue for the device
* @max_write_same_sectors: maximum number of sectors to write per command
**/
void blk_queue_max_write_same_sectors(struct request_queue *q,
unsigned int max_write_same_sectors)
{
q->limits.max_write_same_sectors = max_write_same_sectors;
}
EXPORT_SYMBOL(blk_queue_max_write_same_sectors);
/**
* blk_queue_max_segments - set max hw segments for a request for this queue
* @q: the request queue for the device
* @max_segments: max number of segments
*
* Description:
* Enables a low level driver to set an upper limit on the number of
* hw data segments in a request.
**/
void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
{
if (!max_segments) {
max_segments = 1;
printk(KERN_INFO "%s: set to minimum %d\n",
__func__, max_segments);
}
q->limits.max_segments = max_segments;
}
EXPORT_SYMBOL(blk_queue_max_segments);
/**
* blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
* @q: the request queue for the device
* @max_size: max size of segment in bytes
*
* Description:
* Enables a low level driver to set an upper limit on the size of a
* coalesced segment
**/
void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
{
if (max_size < PAGE_CACHE_SIZE) {
max_size = PAGE_CACHE_SIZE;
printk(KERN_INFO "%s: set to minimum %d\n",
__func__, max_size);
}
q->limits.max_segment_size = max_size;
}
EXPORT_SYMBOL(blk_queue_max_segment_size);
/**
* blk_queue_logical_block_size - set logical block size for the queue
* @q: the request queue for the device
* @size: the logical block size, in bytes
*
* Description:
* This should be set to the lowest possible block size that the
* storage device can address. The default of 512 covers most
* hardware.
**/
void blk_queue_logical_block_size(struct request_queue *q, unsigned short size)
{
q->limits.logical_block_size = size;
if (q->limits.physical_block_size < size)
q->limits.physical_block_size = size;
if (q->limits.io_min < q->limits.physical_block_size)
q->limits.io_min = q->limits.physical_block_size;
}
EXPORT_SYMBOL(blk_queue_logical_block_size);
/**
* blk_queue_physical_block_size - set physical block size for the queue
* @q: the request queue for the device
* @size: the physical block size, in bytes
*
* Description:
* This should be set to the lowest possible sector size that the
* hardware can operate on without reverting to read-modify-write
* operations.
*/
void blk_queue_physical_block_size(struct request_queue *q, unsigned int size)
{
q->limits.physical_block_size = size;
if (q->limits.physical_block_size < q->limits.logical_block_size)
q->limits.physical_block_size = q->limits.logical_block_size;
if (q->limits.io_min < q->limits.physical_block_size)
q->limits.io_min = q->limits.physical_block_size;
}
EXPORT_SYMBOL(blk_queue_physical_block_size);
/**
* blk_queue_alignment_offset - set physical block alignment offset
* @q: the request queue for the device
* @offset: alignment offset in bytes
*
* Description:
* Some devices are naturally misaligned to compensate for things like
* the legacy DOS partition table 63-sector offset. Low-level drivers
* should call this function for devices whose first sector is not
* naturally aligned.
*/
void blk_queue_alignment_offset(struct request_queue *q, unsigned int offset)
{
q->limits.alignment_offset =
offset & (q->limits.physical_block_size - 1);
q->limits.misaligned = 0;
}
EXPORT_SYMBOL(blk_queue_alignment_offset);
/**
* blk_limits_io_min - set minimum request size for a device
* @limits: the queue limits
* @min: smallest I/O size in bytes
*
* Description:
* Some devices have an internal block size bigger than the reported
* hardware sector size. This function can be used to signal the
* smallest I/O the device can perform without incurring a performance
* penalty.
*/
void blk_limits_io_min(struct queue_limits *limits, unsigned int min)
{
limits->io_min = min;
if (limits->io_min < limits->logical_block_size)
limits->io_min = limits->logical_block_size;
if (limits->io_min < limits->physical_block_size)
limits->io_min = limits->physical_block_size;
}
EXPORT_SYMBOL(blk_limits_io_min);
/**
* blk_queue_io_min - set minimum request size for the queue
* @q: the request queue for the device
* @min: smallest I/O size in bytes
*
* Description:
* Storage devices may report a granularity or preferred minimum I/O
* size which is the smallest request the device can perform without
* incurring a performance penalty. For disk drives this is often the
* physical block size. For RAID arrays it is often the stripe chunk
* size. A properly aligned multiple of minimum_io_size is the
* preferred request size for workloads where a high number of I/O
* operations is desired.
*/
void blk_queue_io_min(struct request_queue *q, unsigned int min)
{
blk_limits_io_min(&q->limits, min);
}
EXPORT_SYMBOL(blk_queue_io_min);
/**
* blk_limits_io_opt - set optimal request size for a device
* @limits: the queue limits
* @opt: smallest I/O size in bytes
*
* Description:
* Storage devices may report an optimal I/O size, which is the
* device's preferred unit for sustained I/O. This is rarely reported
* for disk drives. For RAID arrays it is usually the stripe width or
* the internal track size. A properly aligned multiple of
* optimal_io_size is the preferred request size for workloads where
* sustained throughput is desired.
*/
void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt)
{
limits->io_opt = opt;
}
EXPORT_SYMBOL(blk_limits_io_opt);
/**
* blk_queue_io_opt - set optimal request size for the queue
* @q: the request queue for the device
* @opt: optimal request size in bytes
*
* Description:
* Storage devices may report an optimal I/O size, which is the
* device's preferred unit for sustained I/O. This is rarely reported
* for disk drives. For RAID arrays it is usually the stripe width or
* the internal track size. A properly aligned multiple of
* optimal_io_size is the preferred request size for workloads where
* sustained throughput is desired.
*/
void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
{
blk_limits_io_opt(&q->limits, opt);
}
EXPORT_SYMBOL(blk_queue_io_opt);
/**
* blk_queue_stack_limits - inherit underlying queue limits for stacked drivers
* @t: the stacking driver (top)
* @b: the underlying device (bottom)
**/
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
blk_stack_limits(&t->limits, &b->limits, 0);
}
EXPORT_SYMBOL(blk_queue_stack_limits);
/**
* blk_stack_limits - adjust queue_limits for stacked devices
* @t: the stacking driver limits (top device)
* @b: the underlying queue limits (bottom, component device)
* @start: first data sector within component device
*
* Description:
* This function is used by stacking drivers like MD and DM to ensure
* that all component devices have compatible block sizes and
* alignments. The stacking driver must provide a queue_limits
* struct (top) and then iteratively call the stacking function for
* all component (bottom) devices. The stacking function will
* attempt to combine the values and ensure proper alignment.
*
* Returns 0 if the top and bottom queue_limits are compatible. The
* top device's block sizes and alignment offsets may be adjusted to
* ensure alignment with the bottom device. If no compatible sizes
* and alignments exist, -1 is returned and the resulting top
* queue_limits will have the misaligned flag set to indicate that
* the alignment_offset is undefined.
*/
int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t start)
{
unsigned int top, bottom, alignment, ret = 0;
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
t->max_write_same_sectors = min(t->max_write_same_sectors,
b->max_write_same_sectors);
t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn);
t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
b->seg_boundary_mask);
t->max_segments = min_not_zero(t->max_segments, b->max_segments);
t->max_integrity_segments = min_not_zero(t->max_integrity_segments,
b->max_integrity_segments);
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
t->misaligned |= b->misaligned;
alignment = queue_limit_alignment_offset(b, start);
/* Bottom device has different alignment. Check that it is
* compatible with the current top alignment.
*/
if (t->alignment_offset != alignment) {
top = max(t->physical_block_size, t->io_min)
+ t->alignment_offset;
bottom = max(b->physical_block_size, b->io_min) + alignment;
/* Verify that top and bottom intervals line up */
if (max(top, bottom) & (min(top, bottom) - 1)) {
t->misaligned = 1;
ret = -1;
}
}
t->logical_block_size = max(t->logical_block_size,
b->logical_block_size);
t->physical_block_size = max(t->physical_block_size,
b->physical_block_size);
t->io_min = max(t->io_min, b->io_min);
t->io_opt = lcm(t->io_opt, b->io_opt);
t->cluster &= b->cluster;
t->discard_zeroes_data &= b->discard_zeroes_data;
/* Physical block size a multiple of the logical block size? */
if (t->physical_block_size & (t->logical_block_size - 1)) {
t->physical_block_size = t->logical_block_size;
t->misaligned = 1;
ret = -1;
}
/* Minimum I/O a multiple of the physical block size? */
if (t->io_min & (t->physical_block_size - 1)) {
t->io_min = t->physical_block_size;
t->misaligned = 1;
ret = -1;
}
/* Optimal I/O a multiple of the physical block size? */
if (t->io_opt & (t->physical_block_size - 1)) {
t->io_opt = 0;
t->misaligned = 1;
ret = -1;
}
t->raid_partial_stripes_expensive =
max(t->raid_partial_stripes_expensive,
b->raid_partial_stripes_expensive);
/* Find lowest common alignment_offset */
t->alignment_offset = lcm(t->alignment_offset, alignment)
& (max(t->physical_block_size, t->io_min) - 1);
/* Verify that new alignment_offset is on a logical block boundary */
if (t->alignment_offset & (t->logical_block_size - 1)) {
t->misaligned = 1;
ret = -1;
}
/* Discard alignment and granularity */
if (b->discard_granularity) {
alignment = queue_limit_discard_alignment(b, start);
if (t->discard_granularity != 0 &&
t->discard_alignment != alignment) {
top = t->discard_granularity + t->discard_alignment;
bottom = b->discard_granularity + alignment;
/* Verify that top and bottom intervals line up */
if ((max(top, bottom) % min(top, bottom)) != 0)
t->discard_misaligned = 1;
}
t->max_discard_sectors = min_not_zero(t->max_discard_sectors,
b->max_discard_sectors);
t->discard_granularity = max(t->discard_granularity,
b->discard_granularity);
t->discard_alignment = lcm(t->discard_alignment, alignment) %
t->discard_granularity;
}
return ret;
}
EXPORT_SYMBOL(blk_stack_limits);
/**
* bdev_stack_limits - adjust queue limits for stacked drivers
* @t: the stacking driver limits (top device)
* @bdev: the component block_device (bottom)
* @start: first data sector within component device
*
* Description:
* Merges queue limits for a top device and a block_device. Returns
* 0 if alignment didn't change. Returns -1 if adding the bottom
* device caused misalignment.
*/
int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
sector_t start)
{
struct request_queue *bq = bdev_get_queue(bdev);
start += get_start_sect(bdev);
return blk_stack_limits(t, &bq->limits, start);
}
EXPORT_SYMBOL(bdev_stack_limits);
/**
* disk_stack_limits - adjust queue limits for stacked drivers
* @disk: MD/DM gendisk (top)
* @bdev: the underlying block device (bottom)
* @offset: offset to beginning of data within component device
*
* Description:
* Merges the limits for a top level gendisk and a bottom level
* block_device.
*/
void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset)
{
struct request_queue *t = disk->queue;
if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
disk_name(disk, 0, top);
bdevname(bdev, bottom);
printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
top, bottom);
}
}
EXPORT_SYMBOL(disk_stack_limits);
/**
* blk_queue_dma_pad - set pad mask
* @q: the request queue for the device
* @mask: pad mask
*
* Set dma pad mask.
*
* Appending pad buffer to a request modifies the last entry of a
* scatter list such that it includes the pad buffer.
**/
void blk_queue_dma_pad(struct request_queue *q, unsigned int mask)
{
q->dma_pad_mask = mask;
}
EXPORT_SYMBOL(blk_queue_dma_pad);
/**
* blk_queue_update_dma_pad - update pad mask
* @q: the request queue for the device
* @mask: pad mask
*
* Update dma pad mask.
*
* Appending pad buffer to a request modifies the last entry of a
* scatter list such that it includes the pad buffer.
**/
void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
{
if (mask > q->dma_pad_mask)
q->dma_pad_mask = mask;
}
EXPORT_SYMBOL(blk_queue_update_dma_pad);
/**
* blk_queue_dma_drain - Set up a drain buffer for excess dma.
* @q: the request queue for the device
* @dma_drain_needed: fn which returns non-zero if drain is necessary
* @buf: physically contiguous buffer
* @size: size of the buffer in bytes
*
* Some devices have excess DMA problems and can't simply discard (or
* zero fill) the unwanted piece of the transfer. They have to have a
* real area of memory to transfer it into. The use case for this is
* ATAPI devices in DMA mode. If the packet command causes a transfer
* bigger than the transfer size some HBAs will lock up if there
* aren't DMA elements to contain the excess transfer. What this API
* does is adjust the queue so that the buf is always appended
* silently to the scatterlist.
*
* Note: This routine adjusts max_hw_segments to make room for appending
* the drain buffer. If you call blk_queue_max_segments() after calling
* this routine, you must set the limit to one fewer than your device
* can support otherwise there won't be room for the drain buffer.
*/
int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size)
{
if (queue_max_segments(q) < 2)
return -EINVAL;
/* make room for appending the drain */
blk_queue_max_segments(q, queue_max_segments(q) - 1);
q->dma_drain_needed = dma_drain_needed;
q->dma_drain_buffer = buf;
q->dma_drain_size = size;
return 0;
}
EXPORT_SYMBOL_GPL(blk_queue_dma_drain);
/**
* blk_queue_segment_boundary - set boundary rules for segment merging
* @q: the request queue for the device
* @mask: the memory boundary mask
**/
void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
{
if (mask < PAGE_CACHE_SIZE - 1) {
mask = PAGE_CACHE_SIZE - 1;
printk(KERN_INFO "%s: set to minimum %lx\n",
__func__, mask);
}
q->limits.seg_boundary_mask = mask;
}
EXPORT_SYMBOL(blk_queue_segment_boundary);
/**
* blk_queue_dma_alignment - set dma length and memory alignment
* @q: the request queue for the device
* @mask: alignment mask
*
* description:
* set required memory and length alignment for direct dma transactions.
* this is used when building direct io requests for the queue.
*
**/
void blk_queue_dma_alignment(struct request_queue *q, int mask)
{
q->dma_alignment = mask;
}
EXPORT_SYMBOL(blk_queue_dma_alignment);
/**
* blk_queue_update_dma_alignment - update dma length and memory alignment
* @q: the request queue for the device
* @mask: alignment mask
*
* description:
* update required memory and length alignment for direct dma transactions.
* If the requested alignment is larger than the current alignment, then
* the current queue alignment is updated to the new value, otherwise it
* is left alone. The design of this is to allow multiple objects
* (driver, device, transport etc) to set their respective
* alignments without having them interfere.
*
**/
void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
{
BUG_ON(mask > PAGE_SIZE);
if (mask > q->dma_alignment)
q->dma_alignment = mask;
}
EXPORT_SYMBOL(blk_queue_update_dma_alignment);
/**
* blk_queue_flush - configure queue's cache flush capability
* @q: the request queue for the device
* @flush: 0, REQ_FLUSH or REQ_FLUSH | REQ_FUA
*
* Tell block layer cache flush capability of @q. If it supports
* flushing, REQ_FLUSH should be set. If it supports bypassing
* write cache for individual writes, REQ_FUA should be set.
*/
void blk_queue_flush(struct request_queue *q, unsigned int flush)
{
WARN_ON_ONCE(flush & ~(REQ_FLUSH | REQ_FUA));
if (WARN_ON_ONCE(!(flush & REQ_FLUSH) && (flush & REQ_FUA)))
flush &= ~REQ_FUA;
q->flush_flags = flush & (REQ_FLUSH | REQ_FUA);
}
EXPORT_SYMBOL_GPL(blk_queue_flush);
void blk_queue_flush_queueable(struct request_queue *q, bool queueable)
{
q->flush_not_queueable = !queueable;
}
EXPORT_SYMBOL_GPL(blk_queue_flush_queueable);
static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
blk_max_pfn = max_pfn - 1;
return 0;
}
subsys_initcall(blk_settings_init);