mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
a2b58537b4
NPCM7XX_Tx_OPER GENMASK bits are wrong, fix them.
Hopefully the NPCM7XX_REG_TICR0 register reset value of those bits was 0,
so it did not cause an issue.
The function npcm7xx_timer_oneshot() reads the register
NPCM7XX_REG_TCSR0, modifies it and then reads it again overwriting the
previous changes. Remove the extra read which is pointless.
The function npcm7xx_timer_periodic() is correct but the code writes
to the NPCM7XX_REG_TICR0 register while it is dealing with the
NPCM7XX_REG_TCSR0 register, that is confusing. Separate the write to
the registers in the code for the sake of clarity.
Fixes: 1c00289ecd
("clocksource/drivers/npcm: Add NPCM7xx timer driver")
Signed-off-by: Avi Fishman <avifishman70@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
213 lines
5.6 KiB
C
213 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2014-2018 Nuvoton Technologies tomer.maimon@nuvoton.com
|
|
* All rights reserved.
|
|
*
|
|
* Copyright 2017 Google, Inc.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
#include "timer-of.h"
|
|
|
|
/* Timers registers */
|
|
#define NPCM7XX_REG_TCSR0 0x0 /* Timer 0 Control and Status Register */
|
|
#define NPCM7XX_REG_TICR0 0x8 /* Timer 0 Initial Count Register */
|
|
#define NPCM7XX_REG_TCSR1 0x4 /* Timer 1 Control and Status Register */
|
|
#define NPCM7XX_REG_TICR1 0xc /* Timer 1 Initial Count Register */
|
|
#define NPCM7XX_REG_TDR1 0x14 /* Timer 1 Data Register */
|
|
#define NPCM7XX_REG_TISR 0x18 /* Timer Interrupt Status Register */
|
|
|
|
/* Timers control */
|
|
#define NPCM7XX_Tx_RESETINT 0x1f
|
|
#define NPCM7XX_Tx_PERIOD BIT(27)
|
|
#define NPCM7XX_Tx_INTEN BIT(29)
|
|
#define NPCM7XX_Tx_COUNTEN BIT(30)
|
|
#define NPCM7XX_Tx_ONESHOT 0x0
|
|
#define NPCM7XX_Tx_OPER GENMASK(28, 27)
|
|
#define NPCM7XX_Tx_MIN_PRESCALE 0x1
|
|
#define NPCM7XX_Tx_TDR_MASK_BITS 24
|
|
#define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
|
|
#define NPCM7XX_T0_CLR_INT 0x1
|
|
#define NPCM7XX_Tx_CLR_CSR 0x0
|
|
|
|
/* Timers operating mode */
|
|
#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
|
|
NPCM7XX_Tx_INTEN | \
|
|
NPCM7XX_Tx_MIN_PRESCALE)
|
|
|
|
#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
|
|
NPCM7XX_Tx_INTEN | \
|
|
NPCM7XX_Tx_MIN_PRESCALE)
|
|
|
|
#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
|
|
NPCM7XX_Tx_MIN_PRESCALE)
|
|
|
|
#define NPCM7XX_DEFAULT_CSR (NPCM7XX_Tx_CLR_CSR | NPCM7XX_Tx_MIN_PRESCALE)
|
|
|
|
static int npcm7xx_timer_resume(struct clock_event_device *evt)
|
|
{
|
|
struct timer_of *to = to_timer_of(evt);
|
|
u32 val;
|
|
|
|
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
val |= NPCM7XX_Tx_COUNTEN;
|
|
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm7xx_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
struct timer_of *to = to_timer_of(evt);
|
|
u32 val;
|
|
|
|
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
val &= ~NPCM7XX_Tx_COUNTEN;
|
|
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
|
|
{
|
|
struct timer_of *to = to_timer_of(evt);
|
|
u32 val;
|
|
|
|
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
val &= ~NPCM7XX_Tx_OPER;
|
|
val |= NPCM7XX_START_ONESHOT_Tx;
|
|
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm7xx_timer_periodic(struct clock_event_device *evt)
|
|
{
|
|
struct timer_of *to = to_timer_of(evt);
|
|
u32 val;
|
|
|
|
writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
|
|
|
|
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
val &= ~NPCM7XX_Tx_OPER;
|
|
val |= NPCM7XX_START_PERIODIC_Tx;
|
|
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm7xx_clockevent_set_next_event(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
struct timer_of *to = to_timer_of(clk);
|
|
u32 val;
|
|
|
|
writel(evt, timer_of_base(to) + NPCM7XX_REG_TICR0);
|
|
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
val |= NPCM7XX_START_Tx;
|
|
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
|
|
struct timer_of *to = to_timer_of(evt);
|
|
|
|
writel(NPCM7XX_T0_CLR_INT, timer_of_base(to) + NPCM7XX_REG_TISR);
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct timer_of npcm7xx_to = {
|
|
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
|
|
|
|
.clkevt = {
|
|
.name = "npcm7xx-timer0",
|
|
.features = CLOCK_EVT_FEAT_PERIODIC |
|
|
CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_next_event = npcm7xx_clockevent_set_next_event,
|
|
.set_state_shutdown = npcm7xx_timer_shutdown,
|
|
.set_state_periodic = npcm7xx_timer_periodic,
|
|
.set_state_oneshot = npcm7xx_timer_oneshot,
|
|
.tick_resume = npcm7xx_timer_resume,
|
|
.rating = 300,
|
|
},
|
|
|
|
.of_irq = {
|
|
.handler = npcm7xx_timer0_interrupt,
|
|
.flags = IRQF_TIMER | IRQF_IRQPOLL,
|
|
},
|
|
};
|
|
|
|
static void __init npcm7xx_clockevents_init(void)
|
|
{
|
|
writel(NPCM7XX_DEFAULT_CSR,
|
|
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR0);
|
|
|
|
writel(NPCM7XX_Tx_RESETINT,
|
|
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TISR);
|
|
|
|
npcm7xx_to.clkevt.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&npcm7xx_to.clkevt,
|
|
timer_of_rate(&npcm7xx_to),
|
|
0x1, NPCM7XX_Tx_MAX_CNT);
|
|
}
|
|
|
|
static void __init npcm7xx_clocksource_init(void)
|
|
{
|
|
u32 val;
|
|
|
|
writel(NPCM7XX_DEFAULT_CSR,
|
|
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
|
|
writel(NPCM7XX_Tx_MAX_CNT,
|
|
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TICR1);
|
|
|
|
val = readl(timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
|
|
val |= NPCM7XX_START_Tx;
|
|
writel(val, timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
|
|
|
|
clocksource_mmio_init(timer_of_base(&npcm7xx_to) +
|
|
NPCM7XX_REG_TDR1,
|
|
"npcm7xx-timer1", timer_of_rate(&npcm7xx_to),
|
|
200, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
|
|
clocksource_mmio_readl_down);
|
|
}
|
|
|
|
static int __init npcm7xx_timer_init(struct device_node *np)
|
|
{
|
|
int ret;
|
|
|
|
ret = timer_of_init(np, &npcm7xx_to);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clock input is divided by PRESCALE + 1 before it is fed */
|
|
/* to the counter */
|
|
npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
|
|
(NPCM7XX_Tx_MIN_PRESCALE + 1);
|
|
|
|
npcm7xx_clocksource_init();
|
|
npcm7xx_clockevents_init();
|
|
|
|
pr_info("Enabling NPCM7xx clocksource timer base: %px, IRQ: %d ",
|
|
timer_of_base(&npcm7xx_to), timer_of_irq(&npcm7xx_to));
|
|
|
|
return 0;
|
|
}
|
|
|
|
TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm750-timer", npcm7xx_timer_init);
|
|
|