mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
446e9c6316
This patch adds the device tree to support Toradex Colibri T30, a computer on module which can be used on different carrier boards. The module consists of a Tegra 30 SoC, two PMIC, DDR3L RAM, eMMC, a LM95245 temperature sensor and an AX88772B USB Ethernet Controller. Furthermore, there is a STMPE811 and SGTL5000 audio codec which are not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the modules device tree and enables the supported pheripherials of the carrier board (the Evaluation Board supports almost all of them). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
206 lines
3.8 KiB
Plaintext
206 lines
3.8 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "tegra30-colibri.dtsi"
|
|
|
|
/ {
|
|
model = "Toradex Colibri T30 on Colibri Evaluation Board";
|
|
compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
|
|
|
|
aliases {
|
|
rtc0 = "/i2c@7000c000/rtc@68";
|
|
rtc1 = "/i2c@7000d000/tps65911@2d";
|
|
rtc2 = "/rtc@7000e000";
|
|
};
|
|
|
|
host1x@50000000 {
|
|
dc@54200000 {
|
|
rgb {
|
|
status = "okay";
|
|
nvidia,panel = <&panel>;
|
|
};
|
|
};
|
|
hdmi@54280000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
serial@70006000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@70006040 {
|
|
compatible = "nvidia,tegra30-hsuart";
|
|
status = "okay";
|
|
};
|
|
|
|
serial@70006300 {
|
|
compatible = "nvidia,tegra30-hsuart";
|
|
status = "okay";
|
|
};
|
|
|
|
pwm@7000a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
|
|
* board)
|
|
*/
|
|
i2c@7000c000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
/* M41T0M6 real time clock on carrier board */
|
|
rtc@68 {
|
|
compatible = "stm,m41t00";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
|
|
hdmiddc: i2c@7000c700 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* SPI1: Colibri SSP */
|
|
spi@7000d400 {
|
|
status = "okay";
|
|
spi-max-frequency = <25000000>;
|
|
can0: can@0 {
|
|
compatible = "microchip,mcp2515";
|
|
reg = <0>;
|
|
clocks = <&clk16m>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
|
|
spi-max-frequency = <10000000>;
|
|
};
|
|
spidev0: spi@1 {
|
|
compatible = "spidev";
|
|
reg = <1>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
sdhci@78000200 {
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
};
|
|
|
|
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
|
|
usb@7d000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@7d000000 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
vbus-supply = <&usbc_vbus_reg>;
|
|
};
|
|
|
|
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
|
|
usb@7d008000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@7d008000 {
|
|
status = "okay";
|
|
vbus-supply = <&usbh_vbus_reg>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
|
|
/* PWM<A> */
|
|
pwms = <&pwm 0 5000000>;
|
|
brightness-levels = <255 128 64 32 16 8 4 0>;
|
|
default-brightness-level = <6>;
|
|
/* BL_ON */
|
|
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
clocks {
|
|
clk16m: clk@1 {
|
|
compatible = "fixed-clock";
|
|
reg=<1>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <16000000>;
|
|
clock-output-names = "clk16m";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_POWER>;
|
|
debounce-interval = <10>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
panel: panel {
|
|
/*
|
|
* edt,et057090dhu: EDT 5.7" LCD TFT
|
|
* edt,et070080dh6: EDT 7.0" LCD TFT
|
|
*/
|
|
compatible = "edt,et057090dhu", "simple-panel";
|
|
|
|
backlight = <&backlight>;
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
pwmb {
|
|
label = "PWM<B>";
|
|
pwms = <&pwm 1 19600>;
|
|
max-brightness = <255>;
|
|
};
|
|
pwmc {
|
|
label = "PWM<C>";
|
|
pwms = <&pwm 2 19600>;
|
|
max-brightness = <255>;
|
|
};
|
|
pwmd {
|
|
label = "PWM<D>";
|
|
pwms = <&pwm 3 19600>;
|
|
max-brightness = <255>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
sys_5v0_reg: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
usbc_vbus_reg: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "usbc_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&sys_5v0_reg>;
|
|
};
|
|
|
|
/* USBH_PEN */
|
|
usbh_vbus_reg: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
regulator-name = "usbh_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
|
|
vin-supply = <&sys_5v0_reg>;
|
|
};
|
|
};
|
|
};
|