| .. |
|
acard-ahci.c
|
libata: convert core and drivers to ->hw_tag usage
|
2018-05-11 13:10:43 -07:00 |
|
ahci_brcm.c
|
ata: ahci_brcm: Recover from failures to identify devices
|
2018-01-17 07:52:29 -08:00 |
|
ahci_ceva.c
|
ata: ceva: Add SMMU support for SATA IP
|
2017-10-23 07:09:27 -07:00 |
|
ahci_da850.c
|
sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
|
2017-08-16 07:38:27 -07:00 |
|
ahci_dm816.c
|
ata: ahci: add support for DaVinci DM816 SATA controller
|
2017-03-24 11:40:03 -04:00 |
|
ahci_imx.c
|
ahci: imx: add the imx8qm ahci sata support
|
2018-03-29 06:43:55 -07:00 |
|
ahci_mtk.c
|
ahci: mtk: Change driver name to ahci-mtk
|
2017-12-04 12:35:29 -08:00 |
|
ahci_mvebu.c
|
ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
|
2018-04-26 11:25:15 -07:00 |
|
ahci_octeon.c
|
Delete redundant return value check of platform_get_resource()
|
2017-03-06 15:40:59 -05:00 |
|
ahci_platform.c
|
Revert "ata: ahci_platform: allow disabling of hotplug to save power"
|
2018-08-06 10:22:35 -07:00 |
|
ahci_qoriq.c
|
libahci: Allow drivers to override stop_engine
|
2018-04-26 11:25:04 -07:00 |
|
ahci_seattle.c
|
ata: fix return value check in ahci_seattle_get_port_info()
|
2016-06-15 14:26:41 -04:00 |
|
ahci_st.c
|
ahci: st: Add ports-implemented property in support
|
2016-08-10 12:16:49 -04:00 |
|
ahci_sunxi.c
|
ata: ahci_platform: fix owner module reference mismatch for scsi host
|
2015-01-28 18:45:23 -05:00 |
|
ahci_tegra.c
|
ata: ahci_tegra: Add AHCI support for Tegra210
|
2018-03-14 08:24:21 -07:00 |
|
ahci_xgene.c
|
libahci: Allow drivers to override stop_engine
|
2018-04-26 11:25:04 -07:00 |
|
ahci.c
|
ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
|
2018-07-30 07:09:28 -07:00 |
|
ahci.h
|
Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
|
2018-06-05 17:01:41 -07:00 |
|
ata_generic.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
ata_piix.c
|
ata_piix: constify pci_bits
|
2018-01-08 06:15:41 -08:00 |
|
Kconfig
|
Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
|
2018-04-03 17:42:25 -07:00 |
|
libahci_platform.c
|
Revert "ata: ahci_platform: allow disabling of hotplug to save power"
|
2018-08-06 10:22:35 -07:00 |
|
libahci.c
|
ata: libahci: Allow reconfigure of DEVSLP register
|
2018-07-30 10:33:18 -07:00 |
|
libata-acpi.c
|
ACPI and power management updates for 3.15-rc1
|
2014-04-01 12:48:54 -07:00 |
|
libata-core.c
|
ata: ahci: Support state with min power but Partial low power state
|
2018-07-30 07:09:10 -07:00 |
|
libata-eh.c
|
Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
|
2018-06-05 17:01:41 -07:00 |
|
libata-pmp.c
|
treewide: kzalloc() -> kcalloc()
|
2018-06-12 16:19:22 -07:00 |
|
libata-scsi.c
|
ata: ahci: Support state with min power but Partial low power state
|
2018-07-30 07:09:10 -07:00 |
|
libata-sff.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
libata-trace.c
|
libata: NCQ encapsulation for ZAC MANAGEMENT OUT
|
2016-05-09 12:36:46 -04:00 |
|
libata-transport.c
|
libata: add refcounting to ata_host
|
2018-03-13 13:29:10 -07:00 |
|
libata-transport.h
|
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
2017-11-02 11:10:55 +01:00 |
|
libata-zpodd.c
|
libata: zpodd: small read overflow in eject_tray()
|
2018-05-29 06:48:54 -07:00 |
|
libata.h
|
libata: add refcounting to ata_host
|
2018-03-13 13:29:10 -07:00 |
|
Makefile
|
Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
|
2018-04-03 17:42:25 -07:00 |
|
pata_acpi.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_ali.c
|
ata: Deprecate pci_get_bus_and_slot()
|
2018-01-11 17:23:23 -06:00 |
|
pata_amd.c
|
cs5536: add support for IDE controller variant
|
2017-08-11 10:35:07 -07:00 |
|
pata_arasan_cf.c
|
pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()
|
2018-02-18 05:16:35 -08:00 |
|
pata_artop.c
|
ata: pata_artop: remove redundant initialization of pio
|
2017-09-18 20:24:21 -07:00 |
|
pata_atiixp.c
|
libata:pata_atiixp: Don't use unconnected secondary port on SB600
|
2018-01-08 04:02:02 -08:00 |
|
pata_atp867x.c
|
ata: mark expected switch fall-throughs
|
2017-10-23 07:06:09 -07:00 |
|
pata_bk3710.c
|
pata_bk3710: clarify license version and use SPDX header
|
2018-03-01 13:59:03 -08:00 |
|
pata_cmd64x.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_cmd640.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_cs5520.c
|
ata: remove deprecated use of pci api
|
2015-04-08 10:55:05 -04:00 |
|
pata_cs5530.c
|
ata: Delete unnecessary checks before the function call "pci_dev_put"
|
2015-02-03 07:04:44 -05:00 |
|
pata_cs5535.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_cs5536.c
|
cs5536: add support for IDE controller variant
|
2017-08-11 10:35:07 -07:00 |
|
pata_cypress.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_efar.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_ep93xx.c
|
ata: ep93xx: cut drvdata assignment
|
2017-05-30 11:54:36 -04:00 |
|
pata_falcon.c
|
pata_falcon: clarify license version and use SPDX header
|
2018-03-01 13:58:17 -08:00 |
|
pata_ftide010.c
|
ata: ftide010: fix resource printing
|
2017-06-21 18:06:18 -04:00 |
|
pata_gayle.c
|
ata: add Amiga Gayle PATA controller driver
|
2018-03-19 07:41:36 -07:00 |
|
pata_hpt3x2n.c
|
ata: delete non-required instances of include <linux/init.h>
|
2014-02-13 16:40:56 -05:00 |
|
pata_hpt3x3.c
|
ata: remove deprecated use of pci api
|
2015-04-08 10:55:05 -04:00 |
|
pata_hpt37x.c
|
ata: hpt37x: Convert to use match_string() helper
|
2018-05-07 08:50:30 -07:00 |
|
pata_hpt366.c
|
ata: hpt366: fix incorrect mask when checking at cmd_high_time
|
2016-07-12 11:02:05 -04:00 |
|
pata_icside.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_imx.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_isapnp.c
|
PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
|
2015-03-18 22:39:17 +01:00 |
|
pata_it821x.c
|
pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
|
2018-02-18 05:26:07 -08:00 |
|
pata_it8213.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_ixp4xx_cf.c
|
ata: pass queued command to ->sff_data_xfer method
|
2017-01-10 11:11:17 -05:00 |
|
pata_jmicron.c
|
PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
|
2015-08-24 15:27:11 -05:00 |
|
pata_legacy.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_macio.c
|
pata_macio: Delete an error message for a failed memory allocation in two functions
|
2018-02-18 05:24:16 -08:00 |
|
pata_marvell.c
|
ata: Use IS_ENABLED() instead of checking for built-in or module
|
2016-05-27 11:27:23 -04:00 |
|
pata_mpc52xx.c
|
pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
|
2018-02-18 05:23:25 -08:00 |
|
pata_mpiix.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_netcell.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_ninja32.c
|
pata_ninja32: Avoid corrupting status flags
|
2016-08-30 11:59:47 -04:00 |
|
pata_ns87410.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_ns87415.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_octeon_cf.c
|
pata_octeon_cf: use of_property_read_{bool|u32}()
|
2017-08-28 10:44:24 -07:00 |
|
pata_of_platform.c
|
ata: constify of_device_id structures
|
2017-03-06 15:18:01 -05:00 |
|
pata_oldpiix.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_opti.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_optidma.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_palmld.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_pcmcia.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_pdc202xx_old.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_pdc2027x.c
|
ata: pata_pdc2027x: Replace mdelay with msleep
|
2018-01-25 07:28:31 -08:00 |
|
pata_piccolo.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_platform.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pata_pxa.c
|
ata: pata_pxa: dmaengine conversion
|
2015-09-10 17:02:04 -04:00 |
|
pata_radisys.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_rb532_cf.c
|
ata: rb532_cf: cut drvdata assignment
|
2017-05-30 11:54:37 -04:00 |
|
pata_rdc.c
|
ata: declare ata_port_info structures as const
|
2017-06-12 14:06:34 -04:00 |
|
pata_rz1000.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_samsung_cf.c
|
pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()
|
2018-02-18 05:20:38 -08:00 |
|
pata_sc1200.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_sch.c
|
ata: declare ata_port_info structures as const
|
2017-06-12 14:06:34 -04:00 |
|
pata_serverworks.c
|
pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
|
2014-10-07 17:10:14 -04:00 |
|
pata_sil680.c
|
ata: remove deprecated use of pci api
|
2015-04-08 10:55:05 -04:00 |
|
pata_sis.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_sl82c105.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_triflex.c
|
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
|
2014-05-09 22:37:49 -04:00 |
|
pata_via.c
|
libata: remove ata_sff_data_xfer_noirq()
|
2018-07-11 10:45:28 -07:00 |
|
pdc_adma.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_dwc_460ex.c
|
libata: convert core and drivers to ->hw_tag usage
|
2018-05-11 13:10:43 -07:00 |
|
sata_fsl.c
|
sata_fsl: use the right type for tag bitshift
|
2018-05-14 08:14:21 -07:00 |
|
sata_gemini.c
|
ata: sata_gemini: Introduce explicit IDE pin control
|
2017-08-11 10:32:09 -07:00 |
|
sata_gemini.h
|
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
2017-11-02 11:10:55 +01:00 |
|
sata_highbank.c
|
libahci: Allow drivers to override stop_engine
|
2018-04-26 11:25:04 -07:00 |
|
sata_inic162x.c
|
ata: declare ata_port_info structures as const
|
2017-06-12 14:06:34 -04:00 |
|
sata_mv.c
|
treewide: devm_kzalloc() -> devm_kcalloc()
|
2018-06-12 16:19:22 -07:00 |
|
sata_nv.c
|
sata_nv: set host can_queue count appropriately
|
2018-05-11 13:10:43 -07:00 |
|
sata_promise.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_promise.h
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_qstor.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_rcar.c
|
ata: sata_rcar: Add rudimentary Runtime PM support
|
2018-07-23 08:18:43 -07:00 |
|
sata_sil24.c
|
Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
|
2018-06-05 17:01:41 -07:00 |
|
sata_sil.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_sis.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_svw.c
|
ata: Convert to using %pOF instead of full_name
|
2017-07-18 18:02:36 -04:00 |
|
sata_sx4.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_uli.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sata_via.c
|
sata_via: Enable optional hotplug on VT6420
|
2017-06-26 16:54:53 -04:00 |
|
sata_vsc.c
|
ata: update references for libata documentation
|
2017-05-16 11:25:59 -04:00 |
|
sis.h
|
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
2017-11-02 11:10:55 +01:00 |
eac7e072d7