mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
0e777366fb
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
573 lines
16 KiB
C
573 lines
16 KiB
C
/*
|
|
* tps80031.c -- TI TPS80031/TPS80032 mfd core driver.
|
|
*
|
|
* MFD core driver for TI TPS80031/TPS80032 Fully Integrated
|
|
* Power Management with Power Path and Battery Charger
|
|
*
|
|
* Copyright (c) 2012, NVIDIA Corporation.
|
|
*
|
|
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
|
* whether express or implied; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
|
* 02111-1307, USA
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/tps80031.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
static struct resource tps80031_rtc_resources[] = {
|
|
{
|
|
.start = TPS80031_INT_RTC_ALARM,
|
|
.end = TPS80031_INT_RTC_ALARM,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
/* TPS80031 sub mfd devices */
|
|
static const struct mfd_cell tps80031_cell[] = {
|
|
{
|
|
.name = "tps80031-pmic",
|
|
},
|
|
{
|
|
.name = "tps80031-clock",
|
|
},
|
|
{
|
|
.name = "tps80031-rtc",
|
|
.num_resources = ARRAY_SIZE(tps80031_rtc_resources),
|
|
.resources = tps80031_rtc_resources,
|
|
},
|
|
{
|
|
.name = "tps80031-gpadc",
|
|
},
|
|
{
|
|
.name = "tps80031-fuel-gauge",
|
|
},
|
|
{
|
|
.name = "tps80031-charger",
|
|
},
|
|
};
|
|
|
|
static int tps80031_slave_address[TPS80031_NUM_SLAVES] = {
|
|
TPS80031_I2C_ID0_ADDR,
|
|
TPS80031_I2C_ID1_ADDR,
|
|
TPS80031_I2C_ID2_ADDR,
|
|
TPS80031_I2C_ID3_ADDR,
|
|
};
|
|
|
|
struct tps80031_pupd_data {
|
|
u8 reg;
|
|
u8 pullup_bit;
|
|
u8 pulldown_bit;
|
|
};
|
|
|
|
#define TPS80031_IRQ(_reg, _mask) \
|
|
{ \
|
|
.reg_offset = (TPS80031_INT_MSK_LINE_##_reg) - \
|
|
TPS80031_INT_MSK_LINE_A, \
|
|
.mask = BIT(_mask), \
|
|
}
|
|
|
|
static const struct regmap_irq tps80031_main_irqs[] = {
|
|
[TPS80031_INT_PWRON] = TPS80031_IRQ(A, 0),
|
|
[TPS80031_INT_RPWRON] = TPS80031_IRQ(A, 1),
|
|
[TPS80031_INT_SYS_VLOW] = TPS80031_IRQ(A, 2),
|
|
[TPS80031_INT_RTC_ALARM] = TPS80031_IRQ(A, 3),
|
|
[TPS80031_INT_RTC_PERIOD] = TPS80031_IRQ(A, 4),
|
|
[TPS80031_INT_HOT_DIE] = TPS80031_IRQ(A, 5),
|
|
[TPS80031_INT_VXX_SHORT] = TPS80031_IRQ(A, 6),
|
|
[TPS80031_INT_SPDURATION] = TPS80031_IRQ(A, 7),
|
|
[TPS80031_INT_WATCHDOG] = TPS80031_IRQ(B, 0),
|
|
[TPS80031_INT_BAT] = TPS80031_IRQ(B, 1),
|
|
[TPS80031_INT_SIM] = TPS80031_IRQ(B, 2),
|
|
[TPS80031_INT_MMC] = TPS80031_IRQ(B, 3),
|
|
[TPS80031_INT_RES] = TPS80031_IRQ(B, 4),
|
|
[TPS80031_INT_GPADC_RT] = TPS80031_IRQ(B, 5),
|
|
[TPS80031_INT_GPADC_SW2_EOC] = TPS80031_IRQ(B, 6),
|
|
[TPS80031_INT_CC_AUTOCAL] = TPS80031_IRQ(B, 7),
|
|
[TPS80031_INT_ID_WKUP] = TPS80031_IRQ(C, 0),
|
|
[TPS80031_INT_VBUSS_WKUP] = TPS80031_IRQ(C, 1),
|
|
[TPS80031_INT_ID] = TPS80031_IRQ(C, 2),
|
|
[TPS80031_INT_VBUS] = TPS80031_IRQ(C, 3),
|
|
[TPS80031_INT_CHRG_CTRL] = TPS80031_IRQ(C, 4),
|
|
[TPS80031_INT_EXT_CHRG] = TPS80031_IRQ(C, 5),
|
|
[TPS80031_INT_INT_CHRG] = TPS80031_IRQ(C, 6),
|
|
[TPS80031_INT_RES2] = TPS80031_IRQ(C, 7),
|
|
};
|
|
|
|
static struct regmap_irq_chip tps80031_irq_chip = {
|
|
.name = "tps80031",
|
|
.irqs = tps80031_main_irqs,
|
|
.num_irqs = ARRAY_SIZE(tps80031_main_irqs),
|
|
.num_regs = 3,
|
|
.status_base = TPS80031_INT_STS_A,
|
|
.mask_base = TPS80031_INT_MSK_LINE_A,
|
|
};
|
|
|
|
#define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit) \
|
|
{ \
|
|
.reg = TPS80031_CFG_INPUT_PUPD##_reg, \
|
|
.pulldown_bit = _pulldown_bit, \
|
|
.pullup_bit = _pullup_bit, \
|
|
}
|
|
|
|
static const struct tps80031_pupd_data tps80031_pupds[] = {
|
|
[TPS80031_PREQ1] = PUPD_DATA(1, BIT(0), BIT(1)),
|
|
[TPS80031_PREQ2A] = PUPD_DATA(1, BIT(2), BIT(3)),
|
|
[TPS80031_PREQ2B] = PUPD_DATA(1, BIT(4), BIT(5)),
|
|
[TPS80031_PREQ2C] = PUPD_DATA(1, BIT(6), BIT(7)),
|
|
[TPS80031_PREQ3] = PUPD_DATA(2, BIT(0), BIT(1)),
|
|
[TPS80031_NRES_WARM] = PUPD_DATA(2, 0, BIT(2)),
|
|
[TPS80031_PWM_FORCE] = PUPD_DATA(2, BIT(5), 0),
|
|
[TPS80031_CHRG_EXT_CHRG_STATZ] = PUPD_DATA(2, 0, BIT(6)),
|
|
[TPS80031_SIM] = PUPD_DATA(3, BIT(0), BIT(1)),
|
|
[TPS80031_MMC] = PUPD_DATA(3, BIT(2), BIT(3)),
|
|
[TPS80031_GPADC_START] = PUPD_DATA(3, BIT(4), 0),
|
|
[TPS80031_DVSI2C_SCL] = PUPD_DATA(4, 0, BIT(0)),
|
|
[TPS80031_DVSI2C_SDA] = PUPD_DATA(4, 0, BIT(1)),
|
|
[TPS80031_CTLI2C_SCL] = PUPD_DATA(4, 0, BIT(2)),
|
|
[TPS80031_CTLI2C_SDA] = PUPD_DATA(4, 0, BIT(3)),
|
|
};
|
|
static struct tps80031 *tps80031_power_off_dev;
|
|
|
|
int tps80031_ext_power_req_config(struct device *dev,
|
|
unsigned long ext_ctrl_flag, int preq_bit,
|
|
int state_reg_add, int trans_reg_add)
|
|
{
|
|
u8 res_ass_reg = 0;
|
|
int preq_mask_bit = 0;
|
|
int ret;
|
|
|
|
if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ))
|
|
return 0;
|
|
|
|
if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) {
|
|
res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3);
|
|
preq_mask_bit = 5;
|
|
} else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) {
|
|
res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3);
|
|
preq_mask_bit = 6;
|
|
} else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) {
|
|
res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3);
|
|
preq_mask_bit = 7;
|
|
}
|
|
|
|
/* Configure REQ_ASS registers */
|
|
ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg,
|
|
BIT(preq_bit & 0x7));
|
|
if (ret < 0) {
|
|
dev_err(dev, "reg 0x%02x setbit failed, err = %d\n",
|
|
res_ass_reg, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Unmask the PREQ */
|
|
ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1,
|
|
TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit));
|
|
if (ret < 0) {
|
|
dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n",
|
|
TPS80031_PHOENIX_MSK_TRANSITION, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Switch regulator control to resource now */
|
|
if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 |
|
|
TPS80031_PWR_REQ_INPUT_PREQ3)) {
|
|
ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add,
|
|
0x0, TPS80031_STATE_MASK);
|
|
if (ret < 0)
|
|
dev_err(dev, "reg 0x%02x update failed, err = %d\n",
|
|
state_reg_add, ret);
|
|
} else {
|
|
ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add,
|
|
TPS80031_TRANS_SLEEP_OFF,
|
|
TPS80031_TRANS_SLEEP_MASK);
|
|
if (ret < 0)
|
|
dev_err(dev, "reg 0x%02x update failed, err = %d\n",
|
|
trans_reg_add, ret);
|
|
}
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
|
|
|
|
static void tps80031_power_off(void)
|
|
{
|
|
dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
|
|
tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
|
|
TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
|
|
}
|
|
|
|
static void tps80031_pupd_init(struct tps80031 *tps80031,
|
|
struct tps80031_platform_data *pdata)
|
|
{
|
|
struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data;
|
|
int data_size = pdata->pupd_init_data_size;
|
|
int i;
|
|
|
|
for (i = 0; i < data_size; ++i) {
|
|
struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i];
|
|
const struct tps80031_pupd_data *pupd =
|
|
&tps80031_pupds[pupd_init->input_pin];
|
|
u8 update_value = 0;
|
|
u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit;
|
|
|
|
if (pupd_init->setting == TPS80031_PUPD_PULLDOWN)
|
|
update_value = pupd->pulldown_bit;
|
|
else if (pupd_init->setting == TPS80031_PUPD_PULLUP)
|
|
update_value = pupd->pullup_bit;
|
|
|
|
tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg,
|
|
update_value, update_mask);
|
|
}
|
|
}
|
|
|
|
static int tps80031_init_ext_control(struct tps80031 *tps80031,
|
|
struct tps80031_platform_data *pdata)
|
|
{
|
|
struct device *dev = tps80031->dev;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Clear all external control for this rail */
|
|
for (i = 0; i < 9; ++i) {
|
|
ret = tps80031_write(dev, TPS80031_SLAVE_ID1,
|
|
TPS80031_PREQ1_RES_ASS_A + i, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "reg 0x%02x write failed, err = %d\n",
|
|
TPS80031_PREQ1_RES_ASS_A + i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Mask the PREQ */
|
|
ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1,
|
|
TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5);
|
|
if (ret < 0) {
|
|
dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n",
|
|
TPS80031_PHOENIX_MSK_TRANSITION, ret);
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base)
|
|
{
|
|
struct device *dev = tps80031->dev;
|
|
int i, ret;
|
|
|
|
/*
|
|
* The MASK register used for updating status register when
|
|
* interrupt occurs and LINE register used to pass the status
|
|
* to actual interrupt line. As per datasheet:
|
|
* When INT_MSK_LINE [i] is set to 1, the associated interrupt
|
|
* number i is INT line masked, which means that no interrupt is
|
|
* generated on the INT line.
|
|
* When INT_MSK_LINE [i] is set to 0, the associated interrupt
|
|
* number i is line enabled: An interrupt is generated on the
|
|
* INT line.
|
|
* In any case, the INT_STS [i] status bit may or may not be updated,
|
|
* only linked to the INT_MSK_STS [i] configuration register bit.
|
|
*
|
|
* When INT_MSK_STS [i] is set to 1, the associated interrupt number
|
|
* i is status masked, which means that no interrupt is stored in
|
|
* the INT_STS[i] status bit. Note that no interrupt number i is
|
|
* generated on the INT line, even if the INT_MSK_LINE [i] register
|
|
* bit is set to 0.
|
|
* When INT_MSK_STS [i] is set to 0, the associated interrupt number i
|
|
* is status enabled: An interrupt status is updated in the INT_STS [i]
|
|
* register. The interrupt may or may not be generated on the INT line,
|
|
* depending on the INT_MSK_LINE [i] configuration register bit.
|
|
*/
|
|
for (i = 0; i < 3; i++)
|
|
tps80031_write(dev, TPS80031_SLAVE_ID2,
|
|
TPS80031_INT_MSK_STS_A + i, 0x00);
|
|
|
|
ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq,
|
|
IRQF_ONESHOT, irq_base,
|
|
&tps80031_irq_chip, &tps80031->irq_data);
|
|
if (ret < 0) {
|
|
dev_err(dev, "add irq failed, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static bool rd_wr_reg_id0(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rd_wr_reg_id1(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG:
|
|
case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7:
|
|
case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG:
|
|
case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
|
|
case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST:
|
|
case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
|
|
case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
|
|
case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
|
|
case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
|
|
case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
|
|
case TPS80031_BACKUP_REG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool is_volatile_reg_id1(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
|
|
case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
|
|
case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
|
|
case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
|
|
case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
|
|
case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rd_wr_reg_id2(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION:
|
|
case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1:
|
|
case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB:
|
|
case TPS80031_TOGGLE1 ... TPS80031_VIBMODE:
|
|
case TPS80031_PWM1ON ... TPS80031_PWM2OFF:
|
|
case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11:
|
|
case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C:
|
|
case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rd_wr_reg_id3(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config tps80031_regmap_configs[] = {
|
|
{
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = rd_wr_reg_id0,
|
|
.readable_reg = rd_wr_reg_id0,
|
|
.max_register = TPS80031_MAX_REGISTER,
|
|
},
|
|
{
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = rd_wr_reg_id1,
|
|
.readable_reg = rd_wr_reg_id1,
|
|
.volatile_reg = is_volatile_reg_id1,
|
|
.max_register = TPS80031_MAX_REGISTER,
|
|
},
|
|
{
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = rd_wr_reg_id2,
|
|
.readable_reg = rd_wr_reg_id2,
|
|
.max_register = TPS80031_MAX_REGISTER,
|
|
},
|
|
{
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = rd_wr_reg_id3,
|
|
.readable_reg = rd_wr_reg_id3,
|
|
.max_register = TPS80031_MAX_REGISTER,
|
|
},
|
|
};
|
|
|
|
static int tps80031_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct tps80031 *tps80031;
|
|
int ret;
|
|
uint8_t es_version;
|
|
uint8_t ep_ver;
|
|
int i;
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "tps80031 requires platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
|
|
if (!tps80031) {
|
|
dev_err(&client->dev, "Malloc failed for tps80031\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
|
|
if (tps80031_slave_address[i] == client->addr)
|
|
tps80031->clients[i] = client;
|
|
else
|
|
tps80031->clients[i] = i2c_new_dummy(client->adapter,
|
|
tps80031_slave_address[i]);
|
|
if (!tps80031->clients[i]) {
|
|
dev_err(&client->dev, "can't attach client %d\n", i);
|
|
ret = -ENOMEM;
|
|
goto fail_client_reg;
|
|
}
|
|
|
|
i2c_set_clientdata(tps80031->clients[i], tps80031);
|
|
tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
|
|
&tps80031_regmap_configs[i]);
|
|
if (IS_ERR(tps80031->regmap[i])) {
|
|
ret = PTR_ERR(tps80031->regmap[i]);
|
|
dev_err(&client->dev,
|
|
"regmap %d init failed, err %d\n", i, ret);
|
|
goto fail_client_reg;
|
|
}
|
|
}
|
|
|
|
ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
|
|
TPS80031_JTAGVERNUM, &es_version);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Silicon version number read failed: %d\n", ret);
|
|
goto fail_client_reg;
|
|
}
|
|
|
|
ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
|
|
TPS80031_EPROM_REV, &ep_ver);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Silicon eeprom version read failed: %d\n", ret);
|
|
goto fail_client_reg;
|
|
}
|
|
|
|
dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
|
|
es_version, ep_ver);
|
|
tps80031->es_version = es_version;
|
|
tps80031->dev = &client->dev;
|
|
i2c_set_clientdata(client, tps80031);
|
|
tps80031->chip_info = id->driver_data;
|
|
|
|
ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
|
|
if (ret) {
|
|
dev_err(&client->dev, "IRQ init failed: %d\n", ret);
|
|
goto fail_client_reg;
|
|
}
|
|
|
|
tps80031_pupd_init(tps80031, pdata);
|
|
|
|
tps80031_init_ext_control(tps80031, pdata);
|
|
|
|
ret = mfd_add_devices(tps80031->dev, -1,
|
|
tps80031_cell, ARRAY_SIZE(tps80031_cell),
|
|
NULL, 0,
|
|
regmap_irq_get_domain(tps80031->irq_data));
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
|
|
goto fail_mfd_add;
|
|
}
|
|
|
|
if (pdata->use_power_off && !pm_power_off) {
|
|
tps80031_power_off_dev = tps80031;
|
|
pm_power_off = tps80031_power_off;
|
|
}
|
|
return 0;
|
|
|
|
fail_mfd_add:
|
|
regmap_del_irq_chip(client->irq, tps80031->irq_data);
|
|
|
|
fail_client_reg:
|
|
for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
|
|
if (tps80031->clients[i] && (tps80031->clients[i] != client))
|
|
i2c_unregister_device(tps80031->clients[i]);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int tps80031_remove(struct i2c_client *client)
|
|
{
|
|
struct tps80031 *tps80031 = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
if (tps80031_power_off_dev == tps80031) {
|
|
tps80031_power_off_dev = NULL;
|
|
pm_power_off = NULL;
|
|
}
|
|
|
|
mfd_remove_devices(tps80031->dev);
|
|
|
|
regmap_del_irq_chip(client->irq, tps80031->irq_data);
|
|
|
|
for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
|
|
if (tps80031->clients[i] != client)
|
|
i2c_unregister_device(tps80031->clients[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tps80031_id_table[] = {
|
|
{ "tps80031", TPS80031 },
|
|
{ "tps80032", TPS80032 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tps80031_id_table);
|
|
|
|
static struct i2c_driver tps80031_driver = {
|
|
.driver = {
|
|
.name = "tps80031",
|
|
},
|
|
.probe = tps80031_probe,
|
|
.remove = tps80031_remove,
|
|
.id_table = tps80031_id_table,
|
|
};
|
|
|
|
static int __init tps80031_init(void)
|
|
{
|
|
return i2c_add_driver(&tps80031_driver);
|
|
}
|
|
subsys_initcall(tps80031_init);
|
|
|
|
static void __exit tps80031_exit(void)
|
|
{
|
|
i2c_del_driver(&tps80031_driver);
|
|
}
|
|
module_exit(tps80031_exit);
|
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_DESCRIPTION("TPS80031 core driver");
|
|
MODULE_LICENSE("GPL v2");
|