mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
1484276119
Add the ADSP clock support to the R-Car generation 2 CPG driver. This clock gets derived from PLL1. The layout of the ADSPCKCR register is similar to those of the clocks supported by the 'clk-div6' driver but the divider encoding is non-linear, so can't be supported by that driver... Based on the original patch by Konstantin Kozhevnikov <konstantin.kozhevnikov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
38 lines
1.2 KiB
Plaintext
38 lines
1.2 KiB
Plaintext
* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
|
|
|
|
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
|
|
and several fixed ratio dividers.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must be one of
|
|
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
|
|
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
|
|
- "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
|
|
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
|
|
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
|
|
|
|
- reg: Base address and length of the memory resource used by the CPG
|
|
|
|
- clocks: References to the parent clocks: first to the EXTAL clock, second
|
|
to the USB_EXTAL clock
|
|
- #clock-cells: Must be 1
|
|
- clock-output-names: The names of the clocks. Supported clocks are "main",
|
|
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
|
|
"adsp"
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
cpg_clocks: cpg_clocks@e6150000 {
|
|
compatible = "renesas,r8a7790-cpg-clocks",
|
|
"renesas,rcar-gen2-cpg-clocks";
|
|
reg = <0 0xe6150000 0 0x1000>;
|
|
clocks = <&extal_clk &usb_extal_clk>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "main", "pll0, "pll1", "pll3",
|
|
"lb", "qspi", "sdh", "sd0", "sd1", "z",
|
|
"rcan", "adsp";
|
|
};
|