2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/arch/powerpc/platforms/embedded6xx/Kconfig
Stephen Chivers 13ae40370f powerpc/legacy_serial: Support MVME5100 UARTS with shifted registers
This patch adds support to legacy serial for
UARTS with shifted registers.

The MVME5100 Single Board Computer is a PowerPC platform
that has 16550 style UARTS with register addresses that are
16 bytes apart (shifted by 4).

Commit 	309257484c
"powerpc: Cleanup udbg_16550 and add support for LPC PIO-only UARTs"
added support to udbg_16550 for shifted registers by adding a "stride"
parameter to the initialisation operations for Programmed IO and
Memory Mapped IO.

As a consequence it is now possible to use the services of legacy serial
to provide early serial console messages for the MVME5100.

An added benefit of this is that the serial console will always be
"ttyS0" irrespective of whether the computer is fitted with extra
PCI 8250 interface boards or not.

I have tested this patch using the four PowerPC platforms available to me:

	MVME5100 - shifted registers,
	SAM440EP - unshifted registers,
	MPC8349 - unshifted registers,
	MVME4100 - unshifted registers.

Signed-off-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 17:36:25 +10:00

119 lines
2.8 KiB
Plaintext

config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based boards"
depends on 6xx && BROKEN_ON_SMP
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
depends on EMBEDDED6xx
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select DEFAULT_UIMAGE
select MPC10X_BRIDGE
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
KuroboxHG has been tested. In the future classical Kurobox,
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
config STORCENTER
bool "IOMEGA StorCenter"
depends on EMBEDDED6xx
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select MPC10X_BRIDGE
help
Select STORCENTER if configuring for the iomega StorCenter
with an 8241 CPU in it.
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
depends on EMBEDDED6xx
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
config PPC_HOLLY
bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
depends on EMBEDDED6xx
select TSI108_BRIDGE
select PPC_UDBG_16550
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
config PPC_C2K
bool "SBS/GEFanuc C2K board"
depends on EMBEDDED6xx
select MV64X60
select NOT_COHERENT_CACHE
select MTD_CFI_I4
help
This option enables support for the GE Fanuc C2K board (formerly
an SBS board).
config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
select MPIC
select PCI
select PPC_INDIRECT_PCI
select PPC_I8259
select PPC_NATIVE
select PPC_UDBG_16550
help
This option enables support for the Motorola (now Emerson) MVME5100
board.
config TSI108_BRIDGE
bool
select PCI
select MPIC
select MPIC_WEIRD
config MPC10X_BRIDGE
bool
select PPC_INDIRECT_PCI
config MV64X60
bool
select PPC_INDIRECT_PCI
select CHECK_CACHE_COHERENCY
config GAMECUBE_COMMON
bool
config USBGECKO_UDBG
bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
depends on GAMECUBE_COMMON
help
If you say yes to this option, support will be included for the
USB Gecko adapter as an udbg console.
The USB Gecko is a EXI to USB Serial converter that can be plugged
into a memcard slot in the Nintendo GameCube/Wii.
This driver bypasses the EXI layer completely.
If in doubt, say N here.
config GAMECUBE
bool "Nintendo-GameCube"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select GAMECUBE if configuring for the Nintendo GameCube.
More information at: <http://gc-linux.sourceforge.net/>
config WII
bool "Nintendo-Wii"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>