2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 16:13:54 +08:00
linux-next/include/linux/drbd_limits.h
Philipp Reisner dfa8bedbfe drbd: Implemented the disk-timeout option
When the disk-timeout is active, and it expires for a single request,
we consider the local disk as D_FAILED. Note: With this change,
I made both timeout based state transitions HARD state transitions.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09 15:10:45 +02:00

174 lines
5.1 KiB
C

/*
drbd_limits.h
This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
*/
/*
* Our current limitations.
* Some of them are hard limits,
* some of them are arbitrary range limits, that make it easier to provide
* feedback about nonsense settings for certain configurable values.
*/
#ifndef DRBD_LIMITS_H
#define DRBD_LIMITS_H 1
#define DEBUG_RANGE_CHECK 0
#define DRBD_MINOR_COUNT_MIN 1
#define DRBD_MINOR_COUNT_MAX 256
#define DRBD_MINOR_COUNT_DEF 32
#define DRBD_DIALOG_REFRESH_MIN 0
#define DRBD_DIALOG_REFRESH_MAX 600
/* valid port number */
#define DRBD_PORT_MIN 1
#define DRBD_PORT_MAX 0xffff
/* startup { */
/* if you want more than 3.4 days, disable */
#define DRBD_WFC_TIMEOUT_MIN 0
#define DRBD_WFC_TIMEOUT_MAX 300000
#define DRBD_WFC_TIMEOUT_DEF 0
#define DRBD_DEGR_WFC_TIMEOUT_MIN 0
#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000
#define DRBD_DEGR_WFC_TIMEOUT_DEF 0
#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0
#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000
#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0
/* }*/
/* net { */
/* timeout, unit centi seconds
* more than one minute timeout is not useful */
#define DRBD_TIMEOUT_MIN 1
#define DRBD_TIMEOUT_MAX 600
#define DRBD_TIMEOUT_DEF 60 /* 6 seconds */
/* If backing disk takes longer than disk_timeout, mark the disk as failed */
#define DRBD_DISK_TIMEOUT_MIN 0 /* 0 = disabled */
#define DRBD_DISK_TIMEOUT_MAX 6000 /* 10 Minutes */
#define DRBD_DISK_TIMEOUT_DEF 0 /* disabled */
/* active connection retries when C_WF_CONNECTION */
#define DRBD_CONNECT_INT_MIN 1
#define DRBD_CONNECT_INT_MAX 120
#define DRBD_CONNECT_INT_DEF 10 /* seconds */
/* keep-alive probes when idle */
#define DRBD_PING_INT_MIN 1
#define DRBD_PING_INT_MAX 120
#define DRBD_PING_INT_DEF 10
/* timeout for the ping packets.*/
#define DRBD_PING_TIMEO_MIN 1
#define DRBD_PING_TIMEO_MAX 300
#define DRBD_PING_TIMEO_DEF 5
/* max number of write requests between write barriers */
#define DRBD_MAX_EPOCH_SIZE_MIN 1
#define DRBD_MAX_EPOCH_SIZE_MAX 20000
#define DRBD_MAX_EPOCH_SIZE_DEF 2048
/* I don't think that a tcp send buffer of more than 10M is useful */
#define DRBD_SNDBUF_SIZE_MIN 0
#define DRBD_SNDBUF_SIZE_MAX (10<<20)
#define DRBD_SNDBUF_SIZE_DEF 0
#define DRBD_RCVBUF_SIZE_MIN 0
#define DRBD_RCVBUF_SIZE_MAX (10<<20)
#define DRBD_RCVBUF_SIZE_DEF 0
/* @4k PageSize -> 128kB - 512MB */
#define DRBD_MAX_BUFFERS_MIN 32
#define DRBD_MAX_BUFFERS_MAX 131072
#define DRBD_MAX_BUFFERS_DEF 2048
/* @4k PageSize -> 4kB - 512MB */
#define DRBD_UNPLUG_WATERMARK_MIN 1
#define DRBD_UNPLUG_WATERMARK_MAX 131072
#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16)
/* 0 is disabled.
* 200 should be more than enough even for very short timeouts */
#define DRBD_KO_COUNT_MIN 0
#define DRBD_KO_COUNT_MAX 200
#define DRBD_KO_COUNT_DEF 0
/* } */
/* syncer { */
/* FIXME allow rate to be zero? */
#define DRBD_RATE_MIN 1
/* channel bonding 10 GbE, or other hardware */
#define DRBD_RATE_MAX (4 << 20)
#define DRBD_RATE_DEF 250 /* kb/second */
/* less than 7 would hit performance unnecessarily.
* 3833 is the largest prime that still does fit
* into 64 sectors of activity log */
#define DRBD_AL_EXTENTS_MIN 7
#define DRBD_AL_EXTENTS_MAX 3833
#define DRBD_AL_EXTENTS_DEF 127
#define DRBD_AFTER_MIN -1
#define DRBD_AFTER_MAX 255
#define DRBD_AFTER_DEF -1
/* } */
/* drbdsetup XY resize -d Z
* you are free to reduce the device size to nothing, if you want to.
* the upper limit with 64bit kernel, enough ram and flexible meta data
* is 1 PiB, currently. */
/* DRBD_MAX_SECTORS */
#define DRBD_DISK_SIZE_SECT_MIN 0
#define DRBD_DISK_SIZE_SECT_MAX (1 * (2LLU << 40))
#define DRBD_DISK_SIZE_SECT_DEF 0 /* = disabled = no user size... */
#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON
#define DRBD_FENCING_DEF FP_DONT_CARE
#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT
#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT
#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT
#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT
#define DRBD_ON_NO_DATA_DEF OND_IO_ERROR
#define DRBD_ON_CONGESTION_DEF OC_BLOCK
#define DRBD_MAX_BIO_BVECS_MIN 0
#define DRBD_MAX_BIO_BVECS_MAX 128
#define DRBD_MAX_BIO_BVECS_DEF 0
#define DRBD_C_PLAN_AHEAD_MIN 0
#define DRBD_C_PLAN_AHEAD_MAX 300
#define DRBD_C_PLAN_AHEAD_DEF 0 /* RS rate controller disabled by default */
#define DRBD_C_DELAY_TARGET_MIN 1
#define DRBD_C_DELAY_TARGET_MAX 100
#define DRBD_C_DELAY_TARGET_DEF 10
#define DRBD_C_FILL_TARGET_MIN 0
#define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */
#define DRBD_C_FILL_TARGET_DEF 0 /* By default disabled -> controlled by delay_target */
#define DRBD_C_MAX_RATE_MIN 250 /* kByte/sec */
#define DRBD_C_MAX_RATE_MAX (4 << 20)
#define DRBD_C_MAX_RATE_DEF 102400
#define DRBD_C_MIN_RATE_MIN 0 /* kByte/sec */
#define DRBD_C_MIN_RATE_MAX (4 << 20)
#define DRBD_C_MIN_RATE_DEF 4096
#define DRBD_CONG_FILL_MIN 0
#define DRBD_CONG_FILL_MAX (10<<21) /* 10GByte in sectors */
#define DRBD_CONG_FILL_DEF 0
#define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN
#define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX
#define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF
#undef RANGE
#endif