2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/usb/host/ehci-grlib.c
Jan Andersson 9be0392989 USB: EHCI: Add bus glue for GRLIB GRUSBHC controller
This patch adds support for the GRLIB GRUSBHC EHCI controller from
Aeroflex Gaisler. The controller is typically found on LEON/GRLIB
SoCs.

Tested on GR-LEON4-ITX with with little endian interface and on
LEON3 system on GR-PCI-XC5V development board for big endian
controller.

Signed-off-by: Jan Andersson <jan@gaisler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:43:48 -07:00

243 lines
5.5 KiB
C

/*
* Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller
*
* GRUSBHC is typically found on LEON/GRLIB SoCs
*
* (c) Jan Andersson <jan@gaisler.com>
*
* Based on ehci-ppc-of.c which is:
* (c) Valentine Barshak <vbarshak@ru.mvista.com>
* and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
* and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/signal.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */
/* called during probe() after chip reset completes */
static int ehci_grlib_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
retval = ehci_halt(ehci);
if (retval)
return retval;
retval = ehci_init(hcd);
if (retval)
return retval;
ehci->sbrn = 0x20;
ehci_port_power(ehci, 1);
return ehci_reset(ehci);
}
static const struct hc_driver ehci_grlib_hc_driver = {
.description = hcd_name,
.product_desc = "GRLIB GRUSBHC EHCI",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
*/
.reset = ehci_grlib_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ehci_hcd_grlib_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci = NULL;
struct resource res;
u32 hc_capbase;
int irq;
int rv;
if (usb_disabled())
return -ENODEV;
dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n");
rv = of_address_to_resource(dn, 0, &res);
if (rv)
return rv;
/* usb_create_hcd requires dma_mask != NULL */
op->dev.dma_mask = &op->dev.coherent_dma_mask;
hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev,
"GRUSBHC EHCI USB");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = res.start;
hcd->rsrc_len = res.end - res.start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
rv = -EBUSY;
goto err_rmr;
}
irq = irq_of_parse_and_map(dn, 0);
if (irq == NO_IRQ) {
printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
rv = -EBUSY;
goto err_irq;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
rv = -ENOMEM;
goto err_ioremap;
}
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
/* determine endianness of this implementation */
hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase);
if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) {
ehci->big_endian_mmio = 1;
ehci->big_endian_desc = 1;
ehci->big_endian_capbase = 1;
}
ehci->regs = hcd->regs +
HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
rv = usb_add_hcd(hcd, irq, 0);
if (rv)
goto err_ehci;
return 0;
err_ehci:
iounmap(hcd->regs);
err_ioremap:
irq_dispose_mapping(irq);
err_irq:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_rmr:
usb_put_hcd(hcd);
return rv;
}
static int ehci_hcd_grlib_remove(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n");
usb_remove_hcd(hcd);
iounmap(hcd->regs);
irq_dispose_mapping(hcd->irq);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
return 0;
}
static void ehci_hcd_grlib_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
static const struct of_device_id ehci_hcd_grlib_of_match[] = {
{
.name = "GAISLER_EHCI",
},
{
.name = "01_026",
},
{},
};
MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match);
static struct platform_driver ehci_grlib_driver = {
.probe = ehci_hcd_grlib_probe,
.remove = ehci_hcd_grlib_remove,
.shutdown = ehci_hcd_grlib_shutdown,
.driver = {
.name = "grlib-ehci",
.owner = THIS_MODULE,
.of_match_table = ehci_hcd_grlib_of_match,
},
};