2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/arch/powerpc/platforms/powernv/idle.c
Michael Ellerman 4bece972fc powerpc/powernv: pnv_init_idle_states() should only run on powernv
Although this init call checks for device tree properties before doing
anything, it should still only run on powernv machines.

Reviewed-by: Shreyas B Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-15 16:45:12 +10:00

294 lines
7.6 KiB
C

/*
* PowerNV cpuidle code
*
* Copyright 2015 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/opal.h>
#include <asm/cputhreads.h>
#include <asm/cpuidle.h>
#include <asm/code-patching.h>
#include <asm/smp.h>
#include "powernv.h"
#include "subcore.h"
static u32 supported_cpuidle_states;
int pnv_save_sprs_for_winkle(void)
{
int cpu;
int rc;
/*
* hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
* all cpus at boot. Get these reg values of current cpu and use the
* same accross all cpus.
*/
uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
uint64_t hid0_val = mfspr(SPRN_HID0);
uint64_t hid1_val = mfspr(SPRN_HID1);
uint64_t hid4_val = mfspr(SPRN_HID4);
uint64_t hid5_val = mfspr(SPRN_HID5);
uint64_t hmeer_val = mfspr(SPRN_HMEER);
for_each_possible_cpu(cpu) {
uint64_t pir = get_hard_smp_processor_id(cpu);
uint64_t hsprg0_val = (uint64_t)&paca[cpu];
/*
* HSPRG0 is used to store the cpu's pointer to paca. Hence last
* 3 bits are guaranteed to be 0. Program slw to restore HSPRG0
* with 63rd bit set, so that when a thread wakes up at 0x100 we
* can use this bit to distinguish between fastsleep and
* deep winkle.
*/
hsprg0_val |= 1;
rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
if (rc != 0)
return rc;
/* HIDs are per core registers */
if (cpu_thread_in_core(cpu) == 0) {
rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
if (rc != 0)
return rc;
}
}
return 0;
}
static void pnv_alloc_idle_core_states(void)
{
int i, j;
int nr_cores = cpu_nr_cores();
u32 *core_idle_state;
/*
* core_idle_state - First 8 bits track the idle state of each thread
* of the core. The 8th bit is the lock bit. Initially all thread bits
* are set. They are cleared when the thread enters deep idle state
* like sleep and winkle. Initially the lock bit is cleared.
* The lock bit has 2 purposes
* a. While the first thread is restoring core state, it prevents
* other threads in the core from switching to process context.
* b. While the last thread in the core is saving the core state, it
* prevents a different thread from waking up.
*/
for (i = 0; i < nr_cores; i++) {
int first_cpu = i * threads_per_core;
int node = cpu_to_node(first_cpu);
core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
*core_idle_state = PNV_CORE_IDLE_THREAD_BITS;
for (j = 0; j < threads_per_core; j++) {
int cpu = first_cpu + j;
paca[cpu].core_idle_state_ptr = core_idle_state;
paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
paca[cpu].thread_mask = 1 << j;
}
}
update_subcore_sibling_mask();
if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED)
pnv_save_sprs_for_winkle();
}
u32 pnv_get_supported_cpuidle_states(void)
{
return supported_cpuidle_states;
}
EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
static void pnv_fastsleep_workaround_apply(void *info)
{
int rc;
int *err = info;
rc = opal_config_cpu_idle_state(OPAL_CONFIG_IDLE_FASTSLEEP,
OPAL_CONFIG_IDLE_APPLY);
if (rc)
*err = 1;
}
/*
* Used to store fastsleep workaround state
* 0 - Workaround applied/undone at fastsleep entry/exit path (Default)
* 1 - Workaround applied once, never undone.
*/
static u8 fastsleep_workaround_applyonce;
static ssize_t show_fastsleep_workaround_applyonce(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", fastsleep_workaround_applyonce);
}
static ssize_t store_fastsleep_workaround_applyonce(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
cpumask_t primary_thread_mask;
int err;
u8 val;
if (kstrtou8(buf, 0, &val) || val != 1)
return -EINVAL;
if (fastsleep_workaround_applyonce == 1)
return count;
/*
* fastsleep_workaround_applyonce = 1 implies
* fastsleep workaround needs to be left in 'applied' state on all
* the cores. Do this by-
* 1. Patching out the call to 'undo' workaround in fastsleep exit path
* 2. Sending ipi to all the cores which have atleast one online thread
* 3. Patching out the call to 'apply' workaround in fastsleep entry
* path
* There is no need to send ipi to cores which have all threads
* offlined, as last thread of the core entering fastsleep or deeper
* state would have applied workaround.
*/
err = patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_exit,
PPC_INST_NOP);
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_exit");
goto fail;
}
get_online_cpus();
primary_thread_mask = cpu_online_cores_map();
on_each_cpu_mask(&primary_thread_mask,
pnv_fastsleep_workaround_apply,
&err, 1);
put_online_cpus();
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply");
goto fail;
}
err = patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_entry,
PPC_INST_NOP);
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_entry");
goto fail;
}
fastsleep_workaround_applyonce = 1;
return count;
fail:
return -EIO;
}
static DEVICE_ATTR(fastsleep_workaround_applyonce, 0600,
show_fastsleep_workaround_applyonce,
store_fastsleep_workaround_applyonce);
static int __init pnv_init_idle_states(void)
{
struct device_node *power_mgt;
int dt_idle_states;
u32 *flags;
int i;
supported_cpuidle_states = 0;
if (cpuidle_disable != IDLE_NO_OVERRIDE)
goto out;
if (!firmware_has_feature(FW_FEATURE_OPALv3))
goto out;
power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
if (!power_mgt) {
pr_warn("opal: PowerMgmt Node not found\n");
goto out;
}
dt_idle_states = of_property_count_u32_elems(power_mgt,
"ibm,cpu-idle-state-flags");
if (dt_idle_states < 0) {
pr_warn("cpuidle-powernv: no idle states found in the DT\n");
goto out;
}
flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
if (of_property_read_u32_array(power_mgt,
"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
goto out_free;
}
for (i = 0; i < dt_idle_states; i++)
supported_cpuidle_states |= flags[i];
if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_entry,
PPC_INST_NOP);
patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_exit,
PPC_INST_NOP);
} else {
/*
* OPAL_PM_SLEEP_ENABLED_ER1 is set. It indicates that
* workaround is needed to use fastsleep. Provide sysfs
* control to choose how this workaround has to be applied.
*/
device_create_file(cpu_subsys.dev_root,
&dev_attr_fastsleep_workaround_applyonce);
}
pnv_alloc_idle_core_states();
out_free:
kfree(flags);
out:
return 0;
}
machine_subsys_initcall(powernv, pnv_init_idle_states);