renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
Code
e6f4794371
linux-next/drivers/iio/accel/st_accel_core.c
Greg Kroah-Hartman 5e47adb906 Second set of IIO new device support, features and cleanup for the 4.14 cycle. 
New device support:
 * ak8974
   - support the AMI306.
 * st_magnetometer
   - add support for the LIS2MDL with bindings.
 * rockchip-saradc
   - add binding for rv1108 SoC (no driver change).
 * srf08
   - add srf02 (i2c only) and srf10 support.
 * stm32-timer
   - support for the STM32H7 to existing driver.
 
 Features:
 * tools
   - move over to the tools buildsystem rather than hand rolling.
   - add an install section to the build.
 * ak8974
   - use serial number to add device randomness.
   - add AMI306 calibration data output.
 * ccs811
   - triggered buffer support.
 * srf08
   - add a device tree table as the old style i2c probing is going away,
   - add triggered buffer support
 * st32-adc
   - add optional st,min-sample-time-nsecs binding to allow control of
     sampling against analog circuitry.
 * stm32-timer
   - add output compare triggers.
 * ti-ads1015
   - add threshold event support.
 * ti-ads7950
   - Allow use on ACPI platforms including providing a default reference
     voltage as there is no way to obtain this on ACPI currently.
 
 Cleanup and fixes:
 * ad7606
   - fix an error return code in probe.
 * ads1015
   - fix incorrect data rate setting update when capture in progress,
   - fix wrong scale information for the ADS1115,
   - make conversions work when CONFIG_PM is not set,
   - make sure we don't get a stale result after a runtime resume by
     ensuring we wait long enough,
   - avoid returning a false error form the buffer setup callbacks,
   - add enough wait time to get the correct conversion,
   - remove an unnecessary config register update,
   - add a helper to set conversion mode reducing repeated boilerplate,
   - use devm_iio_triggered_buffer_setup to simplify error and remove
     paths,
   - use iio_device_claim_direct_mode instead of opencoding the same.
 * ak8974
   - mark the INT_CLEAR register as precious to prevent debugfs access.
 * apds9300
   - constify the i2c_device_id.
 * at91-sama5 adc
   - add missing Kconfig dependency.
 * bma180 accel
   - constify the i2c_device_id.
 * rockchip_saradc
   - explicitly request exclusive reset control as part of the reset rework
     on going throughout the kernel.
 * st_accel
   - fix drdy configuration for a load of accelerometers that only have
     the int1 line.  Fix is unimportant as presumably no deviec tree actually
     used the non existent hardware line.
 * st_pressure
   - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
     as they don't have this. Fix is unimportant as presumably no device tree
     actually used the non existent hardware line.
 * stm32-dac
   - explicitly request exclusive reset control (part of reset being reworked).
 * tsl2583
   - constify the i2c_device_id.
 * xadc
   - coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlmZpCcRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohlmQ/6A9FAI0wPGeEQCXDiLtIAWI1/DByYsHDk
 P3U6sFS17y56KAQcLS34HVR5lLreHya3hsUmPl4gCsjXZsGWAinyXy74BNtBbPmx
 LtzVsyLdjBP3Nxl/OGgNWG+kiq7Op+uw0/OZohtEqzurG0142S6CVvxteFlmhQNH
 pLlmPGnwk6Z4GsasHma/f2FkDD8oRVgvQSP7dJ9HIwq49qQ76cT/+20X1xODHLGw
 qpXfQiLUFW8E1JBTDDcXZD3M23TWG4DZcVlNnWf8fja/bk4WaLBKqVrI9gGZpZsQ
 xXfrSDRwc216w6tzVWjsNV/M0ZuSdm/VCBeyQa17XQVNelkO4dVrCqFMLCh5i/t5
 p4qhhV9mrbweIgDj++6c+4qMzWSAznWybAKMMlcucmwxHKefcrlgUniE03OzyPpG
 gpMS94enlVW8WpE/iYkxb/d6EqTM9CH2CJH6W4Ve/Xr4aQHkF5/P23k+nsW113of
 T1q1SCKegV9p7hIzqDqDmOQC7iNTcBcu+/7RYtkDn9jmmhiQAxwoPJZunkR1cxD8
 hA04x5W9HuPFdbNRlH1MozClbyRUtk0L/XLTKwA9T0VyRUKV1P6Szcp9wYRw+6G8
 QiA5NNrNPf17L6slLZ06N1auu6vO7BhTmYNKnd6VBO+vi7kF/FM2UdZGHof4WT/4
 zPE/BO8IwTk=
 =b6g8
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for the 4.14 cycle.

New device support:
* ak8974
  - support the AMI306.
* st_magnetometer
  - add support for the LIS2MDL with bindings.
* rockchip-saradc
  - add binding for rv1108 SoC (no driver change).
* srf08
  - add srf02 (i2c only) and srf10 support.
* stm32-timer
  - support for the STM32H7 to existing driver.

Features:
* tools
  - move over to the tools buildsystem rather than hand rolling.
  - add an install section to the build.
* ak8974
  - use serial number to add device randomness.
  - add AMI306 calibration data output.
* ccs811
  - triggered buffer support.
* srf08
  - add a device tree table as the old style i2c probing is going away,
  - add triggered buffer support
* st32-adc
  - add optional st,min-sample-time-nsecs binding to allow control of
    sampling against analog circuitry.
* stm32-timer
  - add output compare triggers.
* ti-ads1015
  - add threshold event support.
* ti-ads7950
  - Allow use on ACPI platforms including providing a default reference
    voltage as there is no way to obtain this on ACPI currently.

Cleanup and fixes:
* ad7606
  - fix an error return code in probe.
* ads1015
  - fix incorrect data rate setting update when capture in progress,
  - fix wrong scale information for the ADS1115,
  - make conversions work when CONFIG_PM is not set,
  - make sure we don't get a stale result after a runtime resume by
    ensuring we wait long enough,
  - avoid returning a false error form the buffer setup callbacks,
  - add enough wait time to get the correct conversion,
  - remove an unnecessary config register update,
  - add a helper to set conversion mode reducing repeated boilerplate,
  - use devm_iio_triggered_buffer_setup to simplify error and remove
    paths,
  - use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
  - mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
  - constify the i2c_device_id.
* at91-sama5 adc
  - add missing Kconfig dependency.
* bma180 accel
  - constify the i2c_device_id.
* rockchip_saradc
  - explicitly request exclusive reset control as part of the reset rework
    on going throughout the kernel.
* st_accel
  - fix drdy configuration for a load of accelerometers that only have
    the int1 line.  Fix is unimportant as presumably no deviec tree actually
    used the non existent hardware line.
* st_pressure
  - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
    as they don't have this. Fix is unimportant as presumably no device tree
    actually used the non existent hardware line.
* stm32-dac
  - explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
  - constify the i2c_device_id.
* xadc
  - coding style fixes.
2017-08-20 10:42:42 -07:00

829 lines
19 KiB
C
Raw Blame History

/*
* STMicroelectronics accelerometers driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/st_sensors.h>
#include "st_accel.h"
#define ST_ACCEL_NUMBER_DATA_CHANNELS 3
/* DEFAULT VALUE FOR SENSORS */
#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
/* FULLSCALE */
#define ST_ACCEL_FS_AVL_2G 2
#define ST_ACCEL_FS_AVL_4G 4
#define ST_ACCEL_FS_AVL_6G 6
#define ST_ACCEL_FS_AVL_8G 8
#define ST_ACCEL_FS_AVL_16G 16
#define ST_ACCEL_FS_AVL_100G 100
#define ST_ACCEL_FS_AVL_200G 200
#define ST_ACCEL_FS_AVL_400G 400
static const struct iio_chan_spec st_accel_8bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8,
ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8,
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8,
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_accel_12bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_accel_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct st_sensor_settings st_accel_sensors_settings[] = {
{
.wai = 0x33,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3DH_ACCEL_DEV_NAME,
[1] = LSM303DLHC_ACCEL_DEV_NAME,
[2] = LSM330D_ACCEL_DEV_NAME,
[3] = LSM330DL_ACCEL_DEV_NAME,
[4] = LSM330DLC_ACCEL_DEV_NAME,
[5] = LSM303AGR_ACCEL_DEV_NAME,
[6] = LIS2DH12_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
.addr = 0x20,
.mask = 0xf0,
.odr_avl = {
{ .hz = 1, .value = 0x01, },
{ .hz = 10, .value = 0x02, },
{ .hz = 25, .value = 0x03, },
{ .hz = 50, .value = 0x04, },
{ .hz = 100, .value = 0x05, },
{ .hz = 200, .value = 0x06, },
{ .hz = 400, .value = 0x07, },
{ .hz = 1600, .value = 0x08, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xf0,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(1000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_4G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(2000),
},
[2] = {
.num = ST_ACCEL_FS_AVL_8G,
.value = 0x02,
.gain = IIO_G_TO_M_S_2(4000),
},
[3] = {
.num = ST_ACCEL_FS_AVL_16G,
.value = 0x03,
.gain = IIO_G_TO_M_S_2(12000),
},
},
},
.bdu = {
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x10,
.mask_int2 = 0x00,
.addr_ihl = 0x25,
.mask_ihl = 0x02,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x23,
.value = BIT(0),
},
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = 0x32,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS331DLH_ACCEL_DEV_NAME,
[1] = LSM303DL_ACCEL_DEV_NAME,
[2] = LSM303DLH_ACCEL_DEV_NAME,
[3] = LSM303DLM_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x18,
.odr_avl = {
{ .hz = 50, .value = 0x00, },
{ .hz = 100, .value = 0x01, },
{ .hz = 400, .value = 0x02, },
{ .hz = 1000, .value = 0x03, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xe0,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(1000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_4G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(2000),
},
[2] = {
.num = ST_ACCEL_FS_AVL_8G,
.value = 0x03,
.gain = IIO_G_TO_M_S_2(3900),
},
},
},
.bdu = {
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x02,
.mask_int2 = 0x10,
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x23,
.value = BIT(0),
},
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = 0x40,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM330_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
.odr = {
.addr = 0x20,
.mask = 0xf0,
.odr_avl = {
{ .hz = 3, .value = 0x01, },
{ .hz = 6, .value = 0x02, },
{ .hz = 12, .value = 0x03, },
{ .hz = 25, .value = 0x04, },
{ .hz = 50, .value = 0x05, },
{ .hz = 100, .value = 0x06, },
{ .hz = 200, .value = 0x07, },
{ .hz = 400, .value = 0x08, },
{ .hz = 800, .value = 0x09, },
{ .hz = 1600, .value = 0x0a, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xf0,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x24,
.mask = 0x38,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(61),
},
[1] = {
.num = ST_ACCEL_FS_AVL_4G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(122),
},
[2] = {
.num = ST_ACCEL_FS_AVL_6G,
.value = 0x02,
.gain = IIO_G_TO_M_S_2(183),
},
[3] = {
.num = ST_ACCEL_FS_AVL_8G,
.value = 0x03,
.gain = IIO_G_TO_M_S_2(244),
},
[4] = {
.num = ST_ACCEL_FS_AVL_16G,
.value = 0x04,
.gain = IIO_G_TO_M_S_2(732),
},
},
},
.bdu = {
.addr = 0x20,
.mask = 0x08,
},
.drdy_irq = {
.addr = 0x23,
.mask_int1 = 0x80,
.mask_int2 = 0x00,
.addr_ihl = 0x23,
.mask_ihl = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
.ig1 = {
.en_addr = 0x23,
.en_mask = 0x08,
},
},
.sim = {
.addr = 0x24,
.value = BIT(0),
},
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = 0x3a,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3LV02DL_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x30, /* DF1 and DF0 */
.odr_avl = {
{ .hz = 40, .value = 0x00, },
{ .hz = 160, .value = 0x01, },
{ .hz = 640, .value = 0x02, },
{ .hz = 2560, .value = 0x03, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xc0,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x21,
.mask = 0x80,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(1000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_6G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(3000),
},
},
},
.bdu = {
.addr = 0x21,
.mask = 0x40,
},
/*
* Data Alignment Setting - needs to be set to get
* left-justified data like all other sensors.
*/
.das = {
.addr = 0x21,
.mask = 0x01,
},
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x21,
.value = BIT(1),
},
.multi_read_bit = true,
.bootime = 2, /* guess */
},
{
.wai = 0x3b,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS331DL_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x80,
.odr_avl = {
{ .hz = 100, .value = 0x00, },
{ .hz = 400, .value = 0x01, },
},
},
.pw = {
.addr = 0x20,
.mask = 0x40,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x20,
.mask = 0x20,
/*
* TODO: check these resulting gain settings, these are
* not in the datsheet
*/
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(18000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_8G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(72000),
},
},
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x04,
.mask_int2 = 0x20,
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x21,
.value = BIT(7),
},
.multi_read_bit = false,
.bootime = 2, /* guess */
},
{
.wai = 0x32,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = H3LIS331DL_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x18,
.odr_avl = {
{ .hz = 50, .value = 0x00, },
{ .hz = 100, .value = 0x01, },
{ .hz = 400, .value = 0x02, },
{ .hz = 1000, .value = 0x03, },
},
},
.pw = {
.addr = 0x20,
.mask = 0x20,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_100G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(49000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_200G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(98000),
},
[2] = {
.num = ST_ACCEL_FS_AVL_400G,
.value = 0x03,
.gain = IIO_G_TO_M_S_2(195000),
},
},
},
.bdu = {
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x02,
.mask_int2 = 0x10,
.addr_ihl = 0x22,
.mask_ihl = 0x80,
},
.sim = {
.addr = 0x23,
.value = BIT(0),
},
.multi_read_bit = true,
.bootime = 2,
},
{
/* No WAI register present */
.sensors_supported = {
[0] = LIS3L02DQ_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x30,
.odr_avl = {
{ .hz = 280, .value = 0x00, },
{ .hz = 560, .value = 0x01, },
{ .hz = 1120, .value = 0x02, },
{ .hz = 4480, .value = 0x03, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xc0,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.gain = IIO_G_TO_M_S_2(488),
},
},
},
/*
* The part has a BDU bit but if set the data is never
* updated so don't set it.
*/
.bdu = {
},
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x21,
.value = BIT(1),
},
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = 0x33,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LNG2DM_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
.odr = {
.addr = 0x20,
.mask = 0xf0,
.odr_avl = {
{ .hz = 1, .value = 0x01, },
{ .hz = 10, .value = 0x02, },
{ .hz = 25, .value = 0x03, },
{ .hz = 50, .value = 0x04, },
{ .hz = 100, .value = 0x05, },
{ .hz = 200, .value = 0x06, },
{ .hz = 400, .value = 0x07, },
{ .hz = 1600, .value = 0x08, },
},
},
.pw = {
.addr = 0x20,
.mask = 0xf0,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
.gain = IIO_G_TO_M_S_2(15600),
},
[1] = {
.num = ST_ACCEL_FS_AVL_4G,
.value = 0x01,
.gain = IIO_G_TO_M_S_2(31200),
},
[2] = {
.num = ST_ACCEL_FS_AVL_8G,
.value = 0x02,
.gain = IIO_G_TO_M_S_2(62500),
},
[3] = {
.num = ST_ACCEL_FS_AVL_16G,
.value = 0x03,
.gain = IIO_G_TO_M_S_2(187500),
},
},
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x10,
.mask_int2 = 0x00,
.addr_ihl = 0x25,
.mask_ihl = 0x02,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.sim = {
.addr = 0x23,
.value = BIT(0),
},
.multi_read_bit = true,
.bootime = 2,
},
};
static int st_accel_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val,
int *val2, long mask)
{
int err;
struct st_sensor_data *adata = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
err = st_sensors_read_info_raw(indio_dev, ch, val);
if (err < 0)
goto read_error;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = adata->current_fullscale->gain / 1000000;
*val2 = adata->current_fullscale->gain % 1000000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = adata->odr;
return IIO_VAL_INT;
default:
return -EINVAL;
}
read_error:
return err;
}
static int st_accel_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int err;
switch (mask) {
case IIO_CHAN_INFO_SCALE: {
int gain;
gain = val * 1000000 + val2;
err = st_sensors_set_fullscale_by_gain(indio_dev, gain);
break;
}
case IIO_CHAN_INFO_SAMP_FREQ:
if (val2)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
err = st_sensors_set_odr(indio_dev, val);
mutex_unlock(&indio_dev->mlock);
return err;
default:
return -EINVAL;
}
return err;
}
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
static struct attribute *st_accel_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group st_accel_attribute_group = {
.attrs = st_accel_attributes,
};
static const struct iio_info accel_info = {
.driver_module = THIS_MODULE,
.attrs = &st_accel_attribute_group,
.read_raw = &st_accel_read_raw,
.write_raw = &st_accel_write_raw,
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
};
#ifdef CONFIG_IIO_TRIGGER
static const struct iio_trigger_ops st_accel_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
.validate_device = st_sensors_validate_device,
};
#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
#else
#define ST_ACCEL_TRIGGER_OPS NULL
#endif
int st_accel_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
struct st_sensors_platform_data *pdata =
(struct st_sensors_platform_data *)adata->dev->platform_data;
int irq = adata->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &accel_info;
mutex_init(&adata->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
return err;
err = st_sensors_check_device_support(indio_dev,
ARRAY_SIZE(st_accel_sensors_settings),
st_accel_sensors_settings);
if (err < 0)
goto st_accel_power_off;
adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
adata->multiread_bit = adata->sensor_settings->multi_read_bit;
indio_dev->channels = adata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
adata->current_fullscale = (struct st_sensor_fullscale_avl *)
&adata->sensor_settings->fs.fs_avl[0];
adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
if (!pdata)
pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
if (err < 0)
goto st_accel_power_off;
err = st_accel_allocate_ring(indio_dev);
if (err < 0)
goto st_accel_power_off;
if (irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
ST_ACCEL_TRIGGER_OPS);
if (err < 0)
goto st_accel_probe_trigger_error;
}
err = iio_device_register(indio_dev);
if (err)
goto st_accel_device_register_error;
dev_info(&indio_dev->dev, "registered accelerometer %s\n",
indio_dev->name);
return 0;
st_accel_device_register_error:
if (irq > 0)
st_sensors_deallocate_trigger(indio_dev);
st_accel_probe_trigger_error:
st_accel_deallocate_ring(indio_dev);
st_accel_power_off:
st_sensors_power_disable(indio_dev);
return err;
}
EXPORT_SYMBOL(st_accel_common_probe);
void st_accel_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
if (adata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_accel_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_accel_common_remove);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
MODULE_LICENSE("GPL v2");
View Git Blame Copy Permalink