2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/drivers/scsi/isci/port.h
Piotr Sawicki e6ec5afde9 isci: remove port destruct handler
The handler was never used.

Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:49 -07:00

478 lines
14 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ISCI_PORT_H_
#define _ISCI_PORT_H_
#include <scsi/libsas.h>
#include "isci.h"
#include "sas.h"
#include "phy.h"
#define SCIC_SDS_DUMMY_PORT 0xFF
struct isci_phy;
struct isci_host;
enum isci_status {
isci_freed = 0x00,
isci_starting = 0x01,
isci_ready = 0x02,
isci_ready_for_io = 0x03,
isci_stopping = 0x04,
isci_stopped = 0x05,
};
/**
* struct scic_sds_port
*
* The core port object provides the the abstraction for an SCU port.
*/
struct scic_sds_port {
/**
* This field contains the information for the base port state machine.
*/
struct sci_base_state_machine state_machine;
bool ready_exit;
/**
* This field is the port index that is reported to the SCI USER.
* This allows the actual hardware physical port to change without
* the SCI USER getting a different answer for the get port index.
*/
u8 logical_port_index;
/**
* This field is the port index used to program the SCU hardware.
*/
u8 physical_port_index;
/**
* This field contains the active phy mask for the port.
* This mask is used in conjunction with the phy state to determine
* which phy to select for some port operations.
*/
u8 active_phy_mask;
u16 reserved_rni;
u16 reserved_tci;
/**
* This field contains the count of the io requests started on this port
* object. It is used to control controller shutdown.
*/
u32 started_request_count;
/**
* This field contains the number of devices assigned to this port.
* It is used to control port start requests.
*/
u32 assigned_device_count;
/**
* This field contains the reason for the port not going ready. It is
* assigned in the state handlers and used in the state transition.
*/
u32 not_ready_reason;
/**
* This field is the table of phys assigned to the port.
*/
struct scic_sds_phy *phy_table[SCI_MAX_PHYS];
/**
* This field is a pointer back to the controller that owns this
* port object.
*/
struct scic_sds_controller *owning_controller;
/**
* This field contains the port start/stop timer handle.
*/
void *timer_handle;
/**
* This field points to the current set of state handlers for this port
* object. These state handlers are assigned at each enter state of
* the state machine.
*/
struct scic_sds_port_state_handler *state_handlers;
/* / Memory mapped hardware register space */
/**
* This field is the pointer to the port task scheduler registers
* for the SCU hardware.
*/
struct scu_port_task_scheduler_registers __iomem
*port_task_scheduler_registers;
/**
* This field is identical for all port objects and points to the port
* task scheduler group PE configuration registers.
* It is used to assign PEs to a port.
*/
u32 __iomem *port_pe_configuration_register;
/**
* This field is the VIIT register space for ths port object.
*/
struct scu_viit_entry __iomem *viit_registers;
};
/**
* struct isci_port - This class represents the port object used to internally
* represent libsas port objects. It also keeps a list of remote device
* objects.
*
*
*/
struct isci_port {
enum isci_status status;
struct isci_host *isci_host;
struct asd_sas_port sas_port;
struct list_head remote_dev_list;
spinlock_t state_lock;
struct list_head domain_dev_list;
struct completion start_complete;
struct completion hard_reset_complete;
enum sci_status hard_reset_status;
struct scic_sds_port sci;
};
static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port)
{
struct isci_port *iport = container_of(sci_port, typeof(*iport), sci);
return iport;
}
enum scic_port_not_ready_reason_code {
SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
SCIC_PORT_NOT_READY_RECONFIGURING,
SCIC_PORT_NOT_READY_REASON_CODE_MAX
};
struct scic_port_end_point_properties {
struct sci_sas_address sas_address;
struct scic_phy_proto protocols;
};
struct scic_port_properties {
u32 index;
struct scic_port_end_point_properties local;
struct scic_port_end_point_properties remote;
u32 phy_mask;
};
/**
* enum scic_sds_port_states - This enumeration depicts all the states for the
* common port state machine.
*
*
*/
enum scic_sds_port_states {
/**
* This state indicates that the port has successfully been stopped.
* In this state no new IO operations are permitted.
* This state is entered from the STOPPING state.
*/
SCI_BASE_PORT_STATE_STOPPED,
/**
* This state indicates that the port is in the process of stopping.
* In this state no new IO operations are permitted, but existing IO
* operations are allowed to complete.
* This state is entered from the READY state.
*/
SCI_BASE_PORT_STATE_STOPPING,
/**
* This state indicates the port is now ready. Thus, the user is
* able to perform IO operations on this port.
* This state is entered from the STARTING state.
*/
SCI_BASE_PORT_STATE_READY,
/**
* The substate where the port is started and ready but has no
* active phys.
*/
SCIC_SDS_PORT_READY_SUBSTATE_WAITING,
/**
* The substate where the port is started and ready and there is
* at least one phy operational.
*/
SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL,
/**
* The substate where the port is started and there was an
* add/remove phy event. This state is only used in Automatic
* Port Configuration Mode (APC)
*/
SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING,
/**
* This state indicates the port is in the process of performing a hard
* reset. Thus, the user is unable to perform IO operations on this
* port.
* This state is entered from the READY state.
*/
SCI_BASE_PORT_STATE_RESETTING,
/**
* This state indicates the port has failed a reset request. This state
* is entered when a port reset request times out.
* This state is entered from the RESETTING state.
*/
SCI_BASE_PORT_STATE_FAILED,
SCI_BASE_PORT_MAX_STATES
};
struct scic_sds_remote_device;
struct scic_sds_request;
typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *);
typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *,
struct scic_sds_phy *);
typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *,
u32 timeout);
typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32);
typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, u32);
typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *);
typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_port *,
struct scic_sds_remote_device *,
struct scic_sds_request *);
struct scic_sds_port_state_handler {
/**
* The reset_handler specifies the method invoked when a user
* attempts to hard reset a port.
*/
scic_sds_port_reset_handler_t reset_handler;
/**
* The add_phy_handler specifies the method invoked when a user
* attempts to add another phy into the port.
*/
scic_sds_port_phy_handler_t add_phy_handler;
/**
* The remove_phy_handler specifies the method invoked when a user
* attempts to remove a phy from the port.
*/
scic_sds_port_phy_handler_t remove_phy_handler;
scic_sds_port_frame_handler_t frame_handler;
scic_sds_port_event_handler_t event_handler;
scic_sds_port_link_handler_t link_up_handler;
scic_sds_port_link_handler_t link_down_handler;
scic_sds_port_io_request_handler_t start_io_handler;
scic_sds_port_io_request_handler_t complete_io_handler;
};
/**
* scic_sds_port_get_controller() -
*
* Helper macro to get the owning controller of this port
*/
#define scic_sds_port_get_controller(this_port) \
((this_port)->owning_controller)
/**
* scic_sds_port_set_base_state_handlers() -
*
* This macro will change the state handlers to those of the specified state id
*/
#define scic_sds_port_set_base_state_handlers(this_port, state_id) \
scic_sds_port_set_state_handlers(\
(this_port), &scic_sds_port_state_handler_table[(state_id)])
/**
* scic_sds_port_set_state_handlers() -
*
* Helper macro to set the port object state handlers
*/
#define scic_sds_port_set_state_handlers(this_port, handlers) \
((this_port)->state_handlers = (handlers))
/**
* scic_sds_port_get_index() -
*
* This macro returns the physical port index for this port object
*/
#define scic_sds_port_get_index(this_port) \
((this_port)->physical_port_index)
static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port)
{
if (WARN_ONCE(sci_port->started_request_count == 0,
"%s: tried to decrement started_request_count past 0!?",
__func__))
/* pass */;
else
sci_port->started_request_count--;
}
#define scic_sds_port_active_phy(port, phy) \
(((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
void scic_sds_port_construct(
struct scic_sds_port *sci_port,
u8 port_index,
struct scic_sds_controller *scic);
enum sci_status scic_sds_port_initialize(
struct scic_sds_port *sci_port,
void __iomem *port_task_scheduler_registers,
void __iomem *port_configuration_regsiter,
void __iomem *viit_registers);
enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port);
enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port);
enum sci_status scic_sds_port_add_phy(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
enum sci_status scic_sds_port_remove_phy(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
void scic_sds_port_setup_transports(
struct scic_sds_port *sci_port,
u32 device_id);
void scic_sds_port_deactivate_phy(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy,
bool do_notify_user);
bool scic_sds_port_link_detected(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
void scic_sds_port_link_up(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
void scic_sds_port_link_down(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
enum sci_status scic_sds_port_start_io(
struct scic_sds_port *sci_port,
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req);
enum sci_status scic_sds_port_complete_io(
struct scic_sds_port *sci_port,
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req);
enum sas_linkrate scic_sds_port_get_max_allowed_speed(
struct scic_sds_port *sci_port);
void scic_sds_port_broadcast_change_received(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy);
bool scic_sds_port_is_valid_phy_assignment(
struct scic_sds_port *sci_port,
u32 phy_index);
void scic_sds_port_get_sas_address(
struct scic_sds_port *sci_port,
struct sci_sas_address *sas_address);
void scic_sds_port_get_attached_sas_address(
struct scic_sds_port *sci_port,
struct sci_sas_address *sas_address);
enum isci_status isci_port_get_state(
struct isci_port *isci_port);
void isci_port_formed(struct asd_sas_phy *);
void isci_port_deformed(struct asd_sas_phy *);
void isci_port_init(
struct isci_port *port,
struct isci_host *host,
int index);
int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
struct isci_phy *iphy);
#endif /* !defined(_ISCI_PORT_H_) */