2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
linux-next/Documentation/devicetree/bindings/phy
Linus Torvalds b240b419db ARM: SoC device tree updates for 4.17
This is the usual set of changes for device trees, with over 700
 non-merged changesets. There is an ongoing set of dtc warning fixes and
 the usual bugfixes, cleanups and added device support.
 
 The most interesting bit as usual is support for new machines listed
 below:
 
 - The Allwinner H6 makes its debut with the Pine-H64 board, and we get
   two new machines based on its older siblings: the H5 based OrangePi
   Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side,
   we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2
   Zero development board (based on H2).
 
 - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
   development board and p2888 CPU module.
 
 - The Nuvoton npcm750 is a BMC that was newly added, for now we only
   support running on the evaluation board.
 
 - STmicroelectronics stm32 gains support for the stm32mp157c and two
   evaluation boards.
 
 - The Toradex Colibri board family grows a few members based on the
   i.MX6ULL variant.
 
 - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6
   family of chips.
 
 - The Phytec phyBOARD Mira is a family of industrial boards based on
   i.MX6. For now, four models get added.
 
 - TI am335x based PDU-001 is an industrial embedded machine used for
   traffic monitoring
 
 - The Aspeed platform now supports running on the BMC on the Qualcomm
   Centriq 2400 server
 
 - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm
   msm8974 based Galaxy S5 is a rather different phone made by the same
   company.
 
 - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
   for the various boards made by Xilinx themselves, as well as the
   Digilent Zybo Z7.
 
 - The ARM Versatile family now supports the "IB2" interface board.
 
 - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
   evaluation boards named after a kind of beer, as most of them are.
   The r8a77980 (V3H) based "Condor" apparently doesn't follow that
   tradition. ;-)
 
 - ROC-RK3328-CC is a simple developement board from the Libre Computer
   Project, based on the Rockchips RK3328 SoC
 
 - Haiku is another development board plus Qseven module based on Rockchips
   RK3368 and made by Theobroma Systems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxjFeAAoJEGCrR//JCVInw2gQALS/sK83IJE0Ngw98Cko8fqn
 NnbaLaZybajRCdZfXFrIgyL1YijsK4eeniA6zXvFixctlx0FcH2Ep1merbFa52Il
 bZKDOeCr6JfSggk2pZvnC7efwAsc5qMmSGU7KgvUV9vgAXTXANdTlVttoBrZldvI
 baR5W34BjcXRvA14FyxUPiQgGiCft3rE2ZJA9CqJQ9W44vxnTpbcYpimwya8LWss
 hhbJ8P73HhVsKlwS4QXajpLJSo52VdhGDZCd/MwH1yWjzgQZ7O2ijSFz3jYmvdZf
 1guE1FhcpHX8/0j1v5OqfEFAjaFUl+Fef11McUlGe4lVM2C47kuNEil//cb4pJ2j
 ipQ0qR26GkoBmoxSlt0cI9yUtSemTWzZZSLeTPNQGytb7hRNdR22xwf2vr9Eh6dB
 PMG2G0VXVp5Xuif+3iDLxFKiPsBsN49RGtqOj6p9eZhbTIRjgQ5671T3Kla0KRLH
 CFlWyYYrRqtUVeM3XSXmNQb9pyuCDqOlLyVngDbCuz4HIly3I2kgSYLTCFZx5FfT
 kkVbNy+cO/TOkX8w1P8XiRDGQ16YHQ5kjvy1mUPiPEnf70L2gD8HXWeVX1J2SXzF
 OoeNJTzON0cpvtUaM/4hsASi5mHz8rv8CTH8HUviRlXvSH/7JqlM2XqhWSVJ+gYZ
 S7/RgDEviOzsHBf/EMUN
 =7rHo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...
2018-04-05 21:18:09 -07:00
..
apm-xgene-phy.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
bcm-ns-usb2-phy.txt phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar 2016-04-30 20:12:28 +05:30
bcm-ns-usb3-phy.txt dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO 2017-06-16 13:22:26 +05:30
berlin-sata-phy.txt phy: berlin-sata: Document BG2 compatible 2014-11-13 11:49:44 +05:30
berlin-usb-phy.txt Documentation: bindings: add doc for the Berlin USB PHY 2014-11-21 19:48:50 +05:30
brcm-sata-phy.txt dt-bindings: phy: Add RX equalizer properties for Broadcom SATA PHY 2017-10-23 11:19:26 +05:30
brcm,brcmstb-usb-phy.txt dt-bindings: Add Broadcom STB USB PHY binding document 2017-10-03 11:54:54 +05:30
brcm,cygnus-pcie-phy.txt dt-bindings: Remove leading zeros from bindings notation 2017-11-09 17:05:05 -06:00
brcm,kona-usb2-phy.txt dt-bindings: brcm: rationalize Broadcom documentation naming 2015-03-26 12:14:11 -05:00
brcm,mdio-mux-bus-pci.txt binding: PHY: Binding doc for NS2 PCIe PHYs. 2016-06-10 23:24:54 -07:00
brcm,ns2-drd-phy.txt dt-bindings: phy: Add DT bindings documentation for NS2 USB DRD PHY 2017-06-09 17:39:39 +05:30
calxeda-combophy.txt dt-bindings: move Calxeda bindings to appropriate subsystems 2015-10-22 09:21:24 -05:00
dm816x-phy.txt phy: Add a driver for dm816x USB PHY 2015-04-03 18:16:19 +05:30
hix5hd2-phy.txt Documentation: Document Hisilicon hix5hd2 sata PHY 2014-07-22 12:46:10 +05:30
keystone-usb-phy.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
meson8b-usb2-phy.txt dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs 2017-06-06 14:50:01 +05:30
meson-gxl-usb2-phy.txt dt-bindings: phy: meson-gxl-usb2-phy: add the reset line and clock 2018-03-08 13:56:25 +05:30
meson-gxl-usb3-phy.txt dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs 2018-03-16 13:40:44 +05:30
mxs-usb-phy.txt dt-bindings: Remove leading zeros from bindings notation 2017-11-09 17:05:05 -06:00
nvidia,tegra20-usb-phy.txt dt-bindings: phy: Clarify ULPI PHY source clock 2018-03-08 15:09:36 +01:00
nvidia,tegra124-xusb-padctl.txt dt-bindings: phy: Fix description of Tegra210 PHY nodes 2016-07-01 14:48:19 +02:00
phy-ath79-usb.txt devicetree: Add bindings for the ATH79 USB phy 2016-01-04 09:42:24 +01:00
phy-bindings.txt dt-binding: phy: don't confuse with Ethernet phy properties 2017-09-06 21:13:54 -07:00
phy-cpcap-usb.txt phy: cpcap-usb: Add CPCAP PMIC USB support 2017-06-06 14:50:21 +05:30
phy-da8xx-usb.txt dt-bindings: Add bindings for phy-da8xx-usb 2016-07-04 18:07:38 +05:30
phy-hi3798cv200-combphy.txt dt-bindings: add bindings doc for hi3798cv200 combphy 2018-02-21 11:54:36 +05:30
phy-hi6220-usb.txt phy: add phy-hi6220-usb 2015-12-20 15:21:38 +05:30
phy-hisi-inno-usb2.txt dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY 2018-03-16 16:55:28 +05:30
phy-lantiq-rcu-usb2.txt phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module 2017-09-04 21:19:02 +02:00
phy-lpc18xx-usb-otg.txt dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding 2016-04-04 16:13:32 +02:00
phy-mapphone-mdm6600.txt phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4 2018-03-16 16:55:30 +05:30
phy-miphy28lp.txt phy: miphy28lp: Pass sysconfig register offsets via syscfg dt property. 2015-01-21 15:23:06 +05:30
phy-miphy365x.txt phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h 2015-04-03 18:16:20 +05:30
phy-mtk-tphy.txt dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate 2018-03-16 13:40:43 +05:30
phy-mvebu-comphy.txt Documentation/bindings: phy: document the Marvell comphy driver 2017-08-30 15:17:45 -07:00
phy-mvebu.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
phy-rockchip-inno-usb2.txt DeviceTree updates for 4.14: 2017-09-07 14:43:33 -07:00
phy-rockchip-typec.txt dt-bindings: phy-rockchip-typec: move extcon property to be optional. 2018-03-16 16:55:36 +05:30
phy-stih41x-usb.txt phy: phy-stih41x-usb: DT spelling s/#phy-cell/#phy-cells/ 2016-04-25 08:38:45 -05:00
phy-stih407-usb.txt phy: phy-stih407-usb: Pass sysconfig register offsets via syscfg property. 2015-01-21 15:23:06 +05:30
phy-stm32-usbphyc.txt dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC) 2018-03-16 13:40:46 +05:30
pistachio-usb-phy.txt phy: Add binding document for Pistachio USB2.0 PHY 2015-06-21 21:53:37 +02:00
pxa1928-usb-phy.txt dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings 2015-06-09 12:20:30 -07:00
qcom-apq8064-sata-phy.txt phy: qcom: Add APQ8064 SATA PHY device tree bindings 2014-07-22 12:46:11 +05:30
qcom-dwc3-usb-phy.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
qcom-ipq806x-sata-phy.txt phy: qcom: Add device tree bindings for IPQ806x SATA PHY 2014-07-22 12:46:12 +05:30
qcom-qmp-phy.txt dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY 2018-03-08 13:56:15 +05:30
qcom-qusb2-phy.txt dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version 2018-03-08 13:56:11 +05:30
qcom,usb-8x16-phy.txt dt-bindings: consolidate USB PHYs in bindings/phy 2015-10-22 09:21:23 -05:00
qcom,usb-hs-phy.txt phy: Add support for Qualcomm's USB HS phy 2017-01-27 13:06:52 +05:30
qcom,usb-hsic-phy.txt phy: Add support for Qualcomm's USB HSIC phy 2017-01-27 13:06:52 +05:30
ralink-usb-phy.txt dt-bindings: phy: Add bindings for ralink-usb PHY 2017-08-20 14:02:22 +05:30
rcar-gen2-phy.txt phy: rcar-gen2: Add r8a7743/5 support 2017-10-23 11:19:26 +05:30
rcar-gen3-phy-usb2.txt dt-bindings: rcar-gen3-phy-usb2: Add bindings for r8a77965 2018-03-16 16:55:25 +05:30
rcar-gen3-phy-usb3.txt dt-bindings: rcar-gen3-phy-usb3: Add bindings for r8a77965 2018-03-16 16:55:27 +05:30
rockchip-dp-phy.txt phy: rockchip-dp: should be a child device of the GRF 2016-04-13 18:33:05 +05:30
rockchip-emmc-phy.txt Documentation: phy: Let the rockchip eMMC PHY get an exported card clock 2016-07-25 10:34:19 +02:00
rockchip-pcie-phy.txt dt-bindings: phy-rockchip-pcie: Convert to per-lane PHY model 2017-08-29 13:18:05 -05:00
rockchip-usb-phy.txt phy: rockchip-usb: Add vbus regulator support. 2017-04-10 16:43:41 +05:30
samsung-phy.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
st-spear-miphy.txt phy: Add drivers for PCIe and SATA phy on SPEAr13xx 2014-07-14 11:04:41 +05:30
sun4i-usb-phy.txt phy: sun4i-usb: add support for R40 USB PHY 2018-02-21 11:54:33 +05:30
sun9i-usb-phy.txt dt-bindings: Remove leading zeros from bindings notation 2017-11-09 17:05:05 -06:00
ti-phy.txt dt-bindings: Use lower case hex in unit-addresses 2017-12-26 10:37:05 -06:00