Sebastian Reichel e530cc8408 iio: isl29028: add isl29030 support ... isl29030 is basically the same chip. The only difference is the chip's first pin. For isl29028 its named ADDR0 and can be used to change the chip's i2c address. For isl29030 on the other hand that pin is named Ials and is an analog current output proportional to ALS/IR. This change is irrelevant for the Linux driver. This has been tested on Motorola Droid 4. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-04-30 17:26:04 +01:00
..
accel	iio: st_pressure: st_accel: Initialise sensor platform data properly	2017-04-26 06:37:53 +01:00
adc	iio: adc: rcar-gyroadc: Derive interface clock speed from fck clock	2017-04-27 05:58:03 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value	2017-04-27 07:16:45 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	Fifth set of IIO fixes for the 4.11 cycle.	2017-04-18 19:38:38 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: Remove unnecessary cast on void pointer	2017-04-02 09:50:32 +01:00
imu	iio: imu: st_lsm6dsx: simplify data ready pin parsing	2017-04-14 15:32:43 +01:00
light	iio: isl29028: add isl29030 support	2017-04-30 17:26:04 +01:00
magnetometer	Merge 4.11-rc4 into staging-next	2017-03-27 09:11:25 +02:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: st_pressure: st_accel: Initialise sensor platform data properly	2017-04-26 06:37:53 +01:00
proximity	iio: proximity: as3935: move storm out of range check	2017-04-27 07:22:46 +01:00
temperature	iio: mlx96014: Add OF device ID table	2017-03-19 10:49:24 +00:00
trigger	Fifth set of IIO fixes for the 4.11 cycle.	2017-04-18 19:38:38 +02:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: core: Fix suspicious sizeof usage	2017-04-27 06:30:52 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00