2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/arch/arm/boot/dts/imx51-apf51dev.dts
Linus Torvalds f83ccb9358 ARM: SoC: device tree changes
A large part of the arm-soc patches are nowadays DT changes, adding support
 for new SoCs, boards and devices without changing kernel source. The plan
 is still to move the devicetree files out of the kernel tree and reduce
 the amount of churn going on here, but we keep finding reasons to delay
 doing that.
 
 Changes are really all over the place, with little sticking out particularly.
 We have contributions from a total of 116 people in this branch.
 
 Unfortunately, the size of this branch also causes a significant number
 of conflicts at the moment, typically when subsystem maintainers merge
 patches that change the driver at the same time as the dts files. In
 most cases this could be avoided because the dts changes are supposed
 to be compatible in both ways, and we are asking everyone to send ARM
 dts changes through our tree only.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/11WCrR//JCVInAQIIyRAA0DjdNNQ/A4G2i1nZCiTFH6a4oZy4JarN
 ATVPkW/V8avhh+yVNe5FWA44Xe6CDC5TXwMaIsbK+w3Iclj3fplh/MsBkQ9ZT9Sl
 LAjJoOjuYucCeDy0WLVioRKZ4PJEDoCu/oZTauIMnmWCOCRxLYpOM3FkAT9oN/Ti
 lswpTSLiV1/U3ZSI4M3qn+Sx1VJL8c/hAIWbvf5if2diYkWPk3VOSKyxmD9zLWdD
 Iqtb79J+ETVeOIM4sHnx79cG4ZCdpOfRAl7qx6hkJu0YATXESxWhpXVE2McTJuzM
 qHKsRRNSfsfSWPeF4angll9o06X/qgdT6C4P2dfH49lGeG7llOttw3OaCx3hWCTe
 U5bt26qtbwG2ZbzocaqvideP+rbpQrCH2vdO1embPv5Lu6peMoBWjxy6twSVXJBG
 LIymJ0IbiGYxL7BReGqRXt6ehy0BDWBeTSTdsGqgEl2TnxHuS/kgGfJc4D5riiEk
 aRPVq10p/k+yo4BZtq2GqXIOG6cqkIQ5lhl5Tg9+MfUlquAONqJP70FgRJDBIw9L
 9uJp71bgSsA6eYg2tXoqJtpdjKplDWavgtACzIkFg2qFLyYmKvx+F0AXbeTIsrri
 /mIchTyG+dgiIjWvj/Xsf7jhrdzRcl3uKsJwFmk927pIsh24HV8T+LKgHrf+sVcO
 qEsEnKGYA6s=
 =zl/N
 -----END PGP SIGNATURE-----

Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...
2014-04-05 15:29:04 -07:00

212 lines
5.0 KiB
Plaintext

/*
* Copyright 2013 Armadeus Systems - <support@armadeus.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/* APF51Dev is a docking board for the APF51 SOM */
#include "imx51-apf51.dts"
/ {
model = "Armadeus Systems APF51Dev docking/development board";
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
lw700 {
native-mode;
clock-frequency = <33000033>;
hactive = <800>;
vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
vfront-porch = <21>;
hsync-len = <64>;
vsync-len = <4>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
port {
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
user-key {
label = "user";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <256>; /* BTN_0 */
};
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
<&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
bus-width = <4>;
non-removable;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx51-apf51dev {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_EIM_EB2__GPIO2_22 0x0C5
MX51_PAD_EIM_EB3__GPIO2_23 0x0C5
MX51_PAD_EIM_CS4__GPIO2_29 0x100
MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
MX51_PAD_GPIO1_2__GPIO1_2 0x0C5
MX51_PAD_GPIO1_3__GPIO1_3 0x0C5
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
>;
};
pinctrl_esdhc2: esdhc2grp {
fsl,pins = <
MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
>;
};
pinctrl_ipu_disp1: ipudisp1grp {
fsl,pins = <
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
>;
};
};
};
&ipu_di0_disp0 {
remote-endpoint = <&display_in>;
};