Al Cooper 0aa0c12262 phy: phy-brcm-usb-init: DRD mode can cause crash on startup ... This is caused by a bug in the BDC core. When the BDC core comes out of reset and it's not selected, it gets a backup clock. When the BDC core is selected, it get's the main clock. If HOST mode is then selected the BDC core has the main clock shut off but the backup clock is not restored. The failure scenario and cause are as follows: - DRD mode is active - Device mode is selected first in bootloader - When host mode is now selected, the clock to the BDC is cut off. - BDC registers are inaccessible and therefore the BDC driver crashes upon Linux boot. The fix is to have the phy driver always force a BDC reset on startup. Fixes: 49859e55e3 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver") Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2017-12-29 13:00:35 +05:30
..
Kconfig	phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver	2017-10-03 11:54:54 +05:30
Makefile	USB/PHY patches for 4.15-rc1	2017-11-13 21:14:07 -08:00
phy-bcm-cygnus-pcie.c
phy-bcm-kona-usb2.c
phy-bcm-ns2-pcie.c
phy-bcm-ns2-usbdrd.c	extcon: Split out extcon header file for consumer and provider device	2017-10-23 14:07:58 +09:00
phy-bcm-ns-usb2.c
phy-bcm-ns-usb3.c	phy: bcm-ns-usb3: add MDIO driver using proper bus layer	2017-06-16 13:22:26 +05:30
phy-brcm-sata.c	phy: brcm-sata: Allow RX equalizer tuning	2017-10-23 11:19:26 +05:30
phy-brcm-usb-init.c	phy: phy-brcm-usb-init: DRD mode can cause crash on startup	2017-12-29 13:00:35 +05:30
phy-brcm-usb-init.h	phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver	2017-10-03 11:54:54 +05:30
phy-brcm-usb.c	phy: phy-brcm-usb: Fix two DT properties to match bindings doc	2017-12-29 13:00:35 +05:30