2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
linux-next/drivers/net/wireless/libertas/main.c
Dan Williams 72f7a6671e libertas: add two-stage firmware request helper
SDIO, GSPI, and CS all use 2-stage firmware and the loading
process and logic should be the same.  Allow module parameters
to override the automatic firmware choice, otherwise just walk
the bus driver's firmware table and pick out the first firmware
pair that exists for the given model.

Some special care is taken to allow overriding of just the helper
or the main firmware, but let the other of the pair be chosen
automatically.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16 15:26:43 -04:00

1180 lines
28 KiB
C

/**
* This file contains the major functions in WLAN
* driver. It includes init, exit, open, close and main
* thread etc..
*/
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/kthread.h>
#include <linux/kfifo.h>
#include <linux/slab.h>
#include <net/cfg80211.h>
#include "host.h"
#include "decl.h"
#include "dev.h"
#include "cfg.h"
#include "debugfs.h"
#include "cmd.h"
#define DRIVER_RELEASE_VERSION "323.p0"
const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
#ifdef DEBUG
"-dbg"
#endif
"";
/* Module parameters */
unsigned int lbs_debug;
EXPORT_SYMBOL_GPL(lbs_debug);
module_param_named(libertas_debug, lbs_debug, int, 0644);
/* This global structure is used to send the confirm_sleep command as
* fast as possible down to the firmware. */
struct cmd_confirm_sleep confirm_sleep;
/**
* the table to keep region code
*/
u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
/**
* FW rate table. FW refers to rates by their index in this table, not by the
* rate value itself. Values of 0x00 are
* reserved positions.
*/
static u8 fw_data_rates[MAX_RATES] =
{ 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12,
0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00
};
/**
* @brief use index to get the data rate
*
* @param idx The index of data rate
* @return data rate or 0
*/
u32 lbs_fw_index_to_data_rate(u8 idx)
{
if (idx >= sizeof(fw_data_rates))
idx = 0;
return fw_data_rates[idx];
}
/**
* @brief use rate to get the index
*
* @param rate data rate
* @return index or 0
*/
u8 lbs_data_rate_to_fw_index(u32 rate)
{
u8 i;
if (!rate)
return 0;
for (i = 0; i < sizeof(fw_data_rates); i++) {
if (rate == fw_data_rates[i])
return i;
}
return 0;
}
/**
* @brief This function opens the ethX interface
*
* @param dev A pointer to net_device structure
* @return 0 or -EBUSY if monitor mode active
*/
static int lbs_dev_open(struct net_device *dev)
{
struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
if (priv->connect_status == LBS_CONNECTED)
netif_carrier_on(dev);
else
netif_carrier_off(dev);
if (!priv->tx_pending_len)
netif_wake_queue(dev);
spin_unlock_irq(&priv->driver_lock);
lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
return ret;
}
/**
* @brief This function closes the ethX interface
*
* @param dev A pointer to net_device structure
* @return 0
*/
static int lbs_eth_stop(struct net_device *dev)
{
struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
netif_stop_queue(dev);
spin_unlock_irq(&priv->driver_lock);
schedule_work(&priv->mcast_work);
lbs_deb_leave(LBS_DEB_NET);
return 0;
}
static void lbs_tx_timeout(struct net_device *dev)
{
struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_TX);
lbs_pr_err("tx watch dog timeout\n");
dev->trans_start = jiffies; /* prevent tx timeout */
if (priv->currenttxskb)
lbs_send_tx_feedback(priv, 0);
/* XX: Shouldn't we also call into the hw-specific driver
to kick it somehow? */
lbs_host_to_card_done(priv);
/* FIXME: reset the card */
lbs_deb_leave(LBS_DEB_TX);
}
void lbs_host_to_card_done(struct lbs_private *priv)
{
unsigned long flags;
lbs_deb_enter(LBS_DEB_THREAD);
spin_lock_irqsave(&priv->driver_lock, flags);
priv->dnld_sent = DNLD_RES_RECEIVED;
/* Wake main thread if commands are pending */
if (!priv->cur_cmd || priv->tx_pending_len > 0) {
if (!priv->wakeup_dev_required)
wake_up_interruptible(&priv->waitq);
}
spin_unlock_irqrestore(&priv->driver_lock, flags);
lbs_deb_leave(LBS_DEB_THREAD);
}
EXPORT_SYMBOL_GPL(lbs_host_to_card_done);
int lbs_set_mac_address(struct net_device *dev, void *addr)
{
int ret = 0;
struct lbs_private *priv = dev->ml_priv;
struct sockaddr *phwaddr = addr;
struct cmd_ds_802_11_mac_address cmd;
lbs_deb_enter(LBS_DEB_NET);
/* In case it was called from the mesh device */
dev = priv->dev;
cmd.hdr.size = cpu_to_le16(sizeof(cmd));
cmd.action = cpu_to_le16(CMD_ACT_SET);
memcpy(cmd.macadd, phwaddr->sa_data, ETH_ALEN);
ret = lbs_cmd_with_response(priv, CMD_802_11_MAC_ADDRESS, &cmd);
if (ret) {
lbs_deb_net("set MAC address failed\n");
goto done;
}
memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN);
memcpy(dev->dev_addr, phwaddr->sa_data, ETH_ALEN);
if (priv->mesh_dev)
memcpy(priv->mesh_dev->dev_addr, phwaddr->sa_data, ETH_ALEN);
done:
lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
return ret;
}
static inline int mac_in_list(unsigned char *list, int list_len,
unsigned char *mac)
{
while (list_len) {
if (!memcmp(list, mac, ETH_ALEN))
return 1;
list += ETH_ALEN;
list_len--;
}
return 0;
}
static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd,
struct net_device *dev, int nr_addrs)
{
int i = nr_addrs;
struct netdev_hw_addr *ha;
int cnt;
if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST))
return nr_addrs;
netif_addr_lock_bh(dev);
cnt = netdev_mc_count(dev);
netdev_for_each_mc_addr(ha, dev) {
if (mac_in_list(cmd->maclist, nr_addrs, ha->addr)) {
lbs_deb_net("mcast address %s:%pM skipped\n", dev->name,
ha->addr);
cnt--;
continue;
}
if (i == MRVDRV_MAX_MULTICAST_LIST_SIZE)
break;
memcpy(&cmd->maclist[6*i], ha->addr, ETH_ALEN);
lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name,
ha->addr);
i++;
cnt--;
}
netif_addr_unlock_bh(dev);
if (cnt)
return -EOVERFLOW;
return i;
}
static void lbs_set_mcast_worker(struct work_struct *work)
{
struct lbs_private *priv = container_of(work, struct lbs_private, mcast_work);
struct cmd_ds_mac_multicast_adr mcast_cmd;
int dev_flags;
int nr_addrs;
int old_mac_control = priv->mac_control;
lbs_deb_enter(LBS_DEB_NET);
dev_flags = priv->dev->flags;
if (priv->mesh_dev)
dev_flags |= priv->mesh_dev->flags;
if (dev_flags & IFF_PROMISC) {
priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE;
priv->mac_control &= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE |
CMD_ACT_MAC_MULTICAST_ENABLE);
goto out_set_mac_control;
} else if (dev_flags & IFF_ALLMULTI) {
do_allmulti:
priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE |
CMD_ACT_MAC_MULTICAST_ENABLE);
goto out_set_mac_control;
}
/* Once for priv->dev, again for priv->mesh_dev if it exists */
nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->dev, 0);
if (nr_addrs >= 0 && priv->mesh_dev)
nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->mesh_dev, nr_addrs);
if (nr_addrs < 0)
goto do_allmulti;
if (nr_addrs) {
int size = offsetof(struct cmd_ds_mac_multicast_adr,
maclist[6*nr_addrs]);
mcast_cmd.action = cpu_to_le16(CMD_ACT_SET);
mcast_cmd.hdr.size = cpu_to_le16(size);
mcast_cmd.nr_of_adrs = cpu_to_le16(nr_addrs);
lbs_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &mcast_cmd.hdr, size);
priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE;
} else
priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE;
priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE |
CMD_ACT_MAC_ALL_MULTICAST_ENABLE);
out_set_mac_control:
if (priv->mac_control != old_mac_control)
lbs_set_mac_control(priv);
lbs_deb_leave(LBS_DEB_NET);
}
void lbs_set_multicast_list(struct net_device *dev)
{
struct lbs_private *priv = dev->ml_priv;
schedule_work(&priv->mcast_work);
}
/**
* @brief This function handles the major jobs in the LBS driver.
* It handles all events generated by firmware, RX data received
* from firmware and TX data sent from kernel.
*
* @param data A pointer to lbs_thread structure
* @return 0
*/
static int lbs_thread(void *data)
{
struct net_device *dev = data;
struct lbs_private *priv = dev->ml_priv;
wait_queue_t wait;
lbs_deb_enter(LBS_DEB_THREAD);
init_waitqueue_entry(&wait, current);
for (;;) {
int shouldsleep;
u8 resp_idx;
lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
add_wait_queue(&priv->waitq, &wait);
set_current_state(TASK_INTERRUPTIBLE);
spin_lock_irq(&priv->driver_lock);
if (kthread_should_stop())
shouldsleep = 0; /* Bye */
else if (priv->surpriseremoved)
shouldsleep = 1; /* We need to wait until we're _told_ to die */
else if (priv->psstate == PS_STATE_SLEEP)
shouldsleep = 1; /* Sleep mode. Nothing we can do till it wakes */
else if (priv->cmd_timed_out)
shouldsleep = 0; /* Command timed out. Recover */
else if (!priv->fw_ready)
shouldsleep = 1; /* Firmware not ready. We're waiting for it */
else if (priv->dnld_sent)
shouldsleep = 1; /* Something is en route to the device already */
else if (priv->tx_pending_len > 0)
shouldsleep = 0; /* We've a packet to send */
else if (priv->resp_len[priv->resp_idx])
shouldsleep = 0; /* We have a command response */
else if (priv->cur_cmd)
shouldsleep = 1; /* Can't send a command; one already running */
else if (!list_empty(&priv->cmdpendingq) &&
!(priv->wakeup_dev_required))
shouldsleep = 0; /* We have a command to send */
else if (kfifo_len(&priv->event_fifo))
shouldsleep = 0; /* We have an event to process */
else
shouldsleep = 1; /* No command */
if (shouldsleep) {
lbs_deb_thread("sleeping, connect_status %d, "
"psmode %d, psstate %d\n",
priv->connect_status,
priv->psmode, priv->psstate);
spin_unlock_irq(&priv->driver_lock);
schedule();
} else
spin_unlock_irq(&priv->driver_lock);
lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n",
priv->currenttxskb, priv->dnld_sent);
set_current_state(TASK_RUNNING);
remove_wait_queue(&priv->waitq, &wait);
lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
if (kthread_should_stop()) {
lbs_deb_thread("break from main thread\n");
break;
}
if (priv->surpriseremoved) {
lbs_deb_thread("adapter removed; waiting to die...\n");
continue;
}
lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
/* Process any pending command response */
spin_lock_irq(&priv->driver_lock);
resp_idx = priv->resp_idx;
if (priv->resp_len[resp_idx]) {
spin_unlock_irq(&priv->driver_lock);
lbs_process_command_response(priv,
priv->resp_buf[resp_idx],
priv->resp_len[resp_idx]);
spin_lock_irq(&priv->driver_lock);
priv->resp_len[resp_idx] = 0;
}
spin_unlock_irq(&priv->driver_lock);
/* Process hardware events, e.g. card removed, link lost */
spin_lock_irq(&priv->driver_lock);
while (kfifo_len(&priv->event_fifo)) {
u32 event;
if (kfifo_out(&priv->event_fifo,
(unsigned char *) &event, sizeof(event)) !=
sizeof(event))
break;
spin_unlock_irq(&priv->driver_lock);
lbs_process_event(priv, event);
spin_lock_irq(&priv->driver_lock);
}
spin_unlock_irq(&priv->driver_lock);
if (priv->wakeup_dev_required) {
lbs_deb_thread("Waking up device...\n");
/* Wake up device */
if (priv->exit_deep_sleep(priv))
lbs_deb_thread("Wakeup device failed\n");
continue;
}
/* command timeout stuff */
if (priv->cmd_timed_out && priv->cur_cmd) {
struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
lbs_pr_info("Timeout submitting command 0x%04x\n",
le16_to_cpu(cmdnode->cmdbuf->command));
lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
if (priv->reset_card)
priv->reset_card(priv);
}
priv->cmd_timed_out = 0;
if (!priv->fw_ready)
continue;
/* Check if we need to confirm Sleep Request received previously */
if (priv->psstate == PS_STATE_PRE_SLEEP &&
!priv->dnld_sent && !priv->cur_cmd) {
if (priv->connect_status == LBS_CONNECTED) {
lbs_deb_thread("pre-sleep, currenttxskb %p, "
"dnld_sent %d, cur_cmd %p\n",
priv->currenttxskb, priv->dnld_sent,
priv->cur_cmd);
lbs_ps_confirm_sleep(priv);
} else {
/* workaround for firmware sending
* deauth/linkloss event immediately
* after sleep request; remove this
* after firmware fixes it
*/
priv->psstate = PS_STATE_AWAKE;
lbs_pr_alert("ignore PS_SleepConfirm in "
"non-connected state\n");
}
}
/* The PS state is changed during processing of Sleep Request
* event above
*/
if ((priv->psstate == PS_STATE_SLEEP) ||
(priv->psstate == PS_STATE_PRE_SLEEP))
continue;
if (priv->is_deep_sleep)
continue;
/* Execute the next command */
if (!priv->dnld_sent && !priv->cur_cmd)
lbs_execute_next_command(priv);
spin_lock_irq(&priv->driver_lock);
if (!priv->dnld_sent && priv->tx_pending_len > 0) {
int ret = priv->hw_host_to_card(priv, MVMS_DAT,
priv->tx_pending_buf,
priv->tx_pending_len);
if (ret) {
lbs_deb_tx("host_to_card failed %d\n", ret);
priv->dnld_sent = DNLD_RES_RECEIVED;
}
priv->tx_pending_len = 0;
if (!priv->currenttxskb) {
/* We can wake the queues immediately if we aren't
waiting for TX feedback */
if (priv->connect_status == LBS_CONNECTED)
netif_wake_queue(priv->dev);
if (priv->mesh_dev &&
lbs_mesh_connected(priv))
netif_wake_queue(priv->mesh_dev);
}
}
spin_unlock_irq(&priv->driver_lock);
}
del_timer(&priv->command_timer);
del_timer(&priv->auto_deepsleep_timer);
lbs_deb_leave(LBS_DEB_THREAD);
return 0;
}
int lbs_suspend(struct lbs_private *priv)
{
int ret;
lbs_deb_enter(LBS_DEB_FW);
if (priv->is_deep_sleep) {
ret = lbs_set_deep_sleep(priv, 0);
if (ret) {
lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
return ret;
}
priv->deep_sleep_required = 1;
}
ret = lbs_set_host_sleep(priv, 1);
netif_device_detach(priv->dev);
if (priv->mesh_dev)
netif_device_detach(priv->mesh_dev);
lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
return ret;
}
EXPORT_SYMBOL_GPL(lbs_suspend);
int lbs_resume(struct lbs_private *priv)
{
int ret;
lbs_deb_enter(LBS_DEB_FW);
ret = lbs_set_host_sleep(priv, 0);
netif_device_attach(priv->dev);
if (priv->mesh_dev)
netif_device_attach(priv->mesh_dev);
if (priv->deep_sleep_required) {
priv->deep_sleep_required = 0;
ret = lbs_set_deep_sleep(priv, 1);
if (ret)
lbs_pr_err("deep sleep activation failed: %d\n", ret);
}
lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
return ret;
}
EXPORT_SYMBOL_GPL(lbs_resume);
/**
* @brief This function gets the HW spec from the firmware and sets
* some basic parameters.
*
* @param priv A pointer to struct lbs_private structure
* @return 0 or -1
*/
static int lbs_setup_firmware(struct lbs_private *priv)
{
int ret = -1;
s16 curlevel = 0, minlevel = 0, maxlevel = 0;
lbs_deb_enter(LBS_DEB_FW);
/* Read MAC address from firmware */
memset(priv->current_addr, 0xff, ETH_ALEN);
ret = lbs_update_hw_spec(priv);
if (ret)
goto done;
/* Read power levels if available */
ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel);
if (ret == 0) {
priv->txpower_cur = curlevel;
priv->txpower_min = minlevel;
priv->txpower_max = maxlevel;
}
/* Send cmd to FW to enable 11D function */
ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_11D_ENABLE, 1);
lbs_set_mac_control(priv);
done:
lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
return ret;
}
/**
* This function handles the timeout of command sending.
* It will re-send the same command again.
*/
static void lbs_cmd_timeout_handler(unsigned long data)
{
struct lbs_private *priv = (struct lbs_private *)data;
unsigned long flags;
lbs_deb_enter(LBS_DEB_CMD);
spin_lock_irqsave(&priv->driver_lock, flags);
if (!priv->cur_cmd)
goto out;
lbs_pr_info("command 0x%04x timed out\n",
le16_to_cpu(priv->cur_cmd->cmdbuf->command));
priv->cmd_timed_out = 1;
wake_up_interruptible(&priv->waitq);
out:
spin_unlock_irqrestore(&priv->driver_lock, flags);
lbs_deb_leave(LBS_DEB_CMD);
}
/**
* This function put the device back to deep sleep mode when timer expires
* and no activity (command, event, data etc.) is detected.
*/
static void auto_deepsleep_timer_fn(unsigned long data)
{
struct lbs_private *priv = (struct lbs_private *)data;
lbs_deb_enter(LBS_DEB_CMD);
if (priv->is_activity_detected) {
priv->is_activity_detected = 0;
} else {
if (priv->is_auto_deep_sleep_enabled &&
(!priv->wakeup_dev_required) &&
(priv->connect_status != LBS_CONNECTED)) {
struct cmd_header cmd;
lbs_deb_main("Entering auto deep sleep mode...\n");
memset(&cmd, 0, sizeof(cmd));
cmd.size = cpu_to_le16(sizeof(cmd));
lbs_cmd_async(priv, CMD_802_11_DEEP_SLEEP, &cmd,
sizeof(cmd));
}
}
mod_timer(&priv->auto_deepsleep_timer , jiffies +
(priv->auto_deep_sleep_timeout * HZ)/1000);
lbs_deb_leave(LBS_DEB_CMD);
}
int lbs_enter_auto_deep_sleep(struct lbs_private *priv)
{
lbs_deb_enter(LBS_DEB_SDIO);
priv->is_auto_deep_sleep_enabled = 1;
if (priv->is_deep_sleep)
priv->wakeup_dev_required = 1;
mod_timer(&priv->auto_deepsleep_timer ,
jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000);
lbs_deb_leave(LBS_DEB_SDIO);
return 0;
}
int lbs_exit_auto_deep_sleep(struct lbs_private *priv)
{
lbs_deb_enter(LBS_DEB_SDIO);
priv->is_auto_deep_sleep_enabled = 0;
priv->auto_deep_sleep_timeout = 0;
del_timer(&priv->auto_deepsleep_timer);
lbs_deb_leave(LBS_DEB_SDIO);
return 0;
}
static int lbs_init_adapter(struct lbs_private *priv)
{
int ret;
lbs_deb_enter(LBS_DEB_MAIN);
memset(priv->current_addr, 0xff, ETH_ALEN);
priv->connect_status = LBS_DISCONNECTED;
priv->channel = DEFAULT_AD_HOC_CHANNEL;
priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
priv->radio_on = 1;
priv->psmode = LBS802_11POWERMODECAM;
priv->psstate = PS_STATE_FULL_POWER;
priv->is_deep_sleep = 0;
priv->is_auto_deep_sleep_enabled = 0;
priv->deep_sleep_required = 0;
priv->wakeup_dev_required = 0;
init_waitqueue_head(&priv->ds_awake_q);
init_waitqueue_head(&priv->scan_q);
priv->authtype_auto = 1;
priv->is_host_sleep_configured = 0;
priv->is_host_sleep_activated = 0;
init_waitqueue_head(&priv->host_sleep_q);
mutex_init(&priv->lock);
setup_timer(&priv->command_timer, lbs_cmd_timeout_handler,
(unsigned long)priv);
setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
(unsigned long)priv);
INIT_LIST_HEAD(&priv->cmdfreeq);
INIT_LIST_HEAD(&priv->cmdpendingq);
spin_lock_init(&priv->driver_lock);
/* Allocate the command buffers */
if (lbs_allocate_cmd_buffer(priv)) {
lbs_pr_err("Out of memory allocating command buffers\n");
ret = -ENOMEM;
goto out;
}
priv->resp_idx = 0;
priv->resp_len[0] = priv->resp_len[1] = 0;
/* Create the event FIFO */
ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
if (ret) {
lbs_pr_err("Out of memory allocating event FIFO buffer\n");
goto out;
}
out:
lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
return ret;
}
static void lbs_free_adapter(struct lbs_private *priv)
{
lbs_deb_enter(LBS_DEB_MAIN);
lbs_free_cmd_buffer(priv);
kfifo_free(&priv->event_fifo);
del_timer(&priv->command_timer);
del_timer(&priv->auto_deepsleep_timer);
lbs_deb_leave(LBS_DEB_MAIN);
}
static const struct net_device_ops lbs_netdev_ops = {
.ndo_open = lbs_dev_open,
.ndo_stop = lbs_eth_stop,
.ndo_start_xmit = lbs_hard_start_xmit,
.ndo_set_mac_address = lbs_set_mac_address,
.ndo_tx_timeout = lbs_tx_timeout,
.ndo_set_multicast_list = lbs_set_multicast_list,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
/**
* @brief This function adds the card. it will probe the
* card, allocate the lbs_priv and initialize the device.
*
* @param card A pointer to card
* @return A pointer to struct lbs_private structure
*/
struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
{
struct net_device *dev;
struct wireless_dev *wdev;
struct lbs_private *priv = NULL;
lbs_deb_enter(LBS_DEB_MAIN);
/* Allocate an Ethernet device and register it */
wdev = lbs_cfg_alloc(dmdev);
if (IS_ERR(wdev)) {
lbs_pr_err("cfg80211 init failed\n");
goto done;
}
wdev->iftype = NL80211_IFTYPE_STATION;
priv = wdev_priv(wdev);
priv->wdev = wdev;
if (lbs_init_adapter(priv)) {
lbs_pr_err("failed to initialize adapter structure.\n");
goto err_wdev;
}
dev = alloc_netdev(0, "wlan%d", ether_setup);
if (!dev) {
dev_err(dmdev, "no memory for network device instance\n");
goto err_adapter;
}
dev->ieee80211_ptr = wdev;
dev->ml_priv = priv;
SET_NETDEV_DEV(dev, dmdev);
wdev->netdev = dev;
priv->dev = dev;
dev->netdev_ops = &lbs_netdev_ops;
dev->watchdog_timeo = 5 * HZ;
dev->ethtool_ops = &lbs_ethtool_ops;
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
priv->card = card;
strcpy(dev->name, "wlan%d");
lbs_deb_thread("Starting main thread...\n");
init_waitqueue_head(&priv->waitq);
priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main");
if (IS_ERR(priv->main_thread)) {
lbs_deb_thread("Error creating main thread.\n");
goto err_ndev;
}
priv->work_thread = create_singlethread_workqueue("lbs_worker");
INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
priv->wol_criteria = 0xffffffff;
priv->wol_gpio = 0xff;
priv->wol_gap = 20;
goto done;
err_ndev:
free_netdev(dev);
err_adapter:
lbs_free_adapter(priv);
err_wdev:
lbs_cfg_free(priv);
priv = NULL;
done:
lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv);
return priv;
}
EXPORT_SYMBOL_GPL(lbs_add_card);
void lbs_remove_card(struct lbs_private *priv)
{
struct net_device *dev = priv->dev;
lbs_deb_enter(LBS_DEB_MAIN);
lbs_remove_mesh(priv);
lbs_scan_deinit(priv);
dev = priv->dev;
cancel_work_sync(&priv->mcast_work);
/* worker thread destruction blocks on the in-flight command which
* should have been cleared already in lbs_stop_card().
*/
lbs_deb_main("destroying worker thread\n");
destroy_workqueue(priv->work_thread);
lbs_deb_main("done destroying worker thread\n");
if (priv->psmode == LBS802_11POWERMODEMAX_PSP) {
priv->psmode = LBS802_11POWERMODECAM;
lbs_set_ps_mode(priv, PS_MODE_ACTION_EXIT_PS, true);
}
if (priv->is_deep_sleep) {
priv->is_deep_sleep = 0;
wake_up_interruptible(&priv->ds_awake_q);
}
priv->is_host_sleep_configured = 0;
priv->is_host_sleep_activated = 0;
wake_up_interruptible(&priv->host_sleep_q);
/* Stop the thread servicing the interrupts */
priv->surpriseremoved = 1;
kthread_stop(priv->main_thread);
lbs_free_adapter(priv);
lbs_cfg_free(priv);
priv->dev = NULL;
free_netdev(dev);
lbs_deb_leave(LBS_DEB_MAIN);
}
EXPORT_SYMBOL_GPL(lbs_remove_card);
int lbs_rtap_supported(struct lbs_private *priv)
{
if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
return 1;
/* newer firmware use a capability mask */
return ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK));
}
int lbs_start_card(struct lbs_private *priv)
{
struct net_device *dev = priv->dev;
int ret = -1;
lbs_deb_enter(LBS_DEB_MAIN);
/* poke the firmware */
ret = lbs_setup_firmware(priv);
if (ret)
goto done;
if (lbs_cfg_register(priv)) {
lbs_pr_err("cannot register device\n");
goto done;
}
lbs_update_channel(priv);
lbs_init_mesh(priv);
lbs_debugfs_init_one(priv, dev);
lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
ret = 0;
done:
lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
return ret;
}
EXPORT_SYMBOL_GPL(lbs_start_card);
void lbs_stop_card(struct lbs_private *priv)
{
struct net_device *dev;
struct cmd_ctrl_node *cmdnode;
unsigned long flags;
lbs_deb_enter(LBS_DEB_MAIN);
if (!priv)
goto out;
dev = priv->dev;
netif_stop_queue(dev);
netif_carrier_off(dev);
lbs_debugfs_remove_one(priv);
lbs_deinit_mesh(priv);
/* Delete the timeout of the currently processing command */
del_timer_sync(&priv->command_timer);
del_timer_sync(&priv->auto_deepsleep_timer);
/* Flush pending command nodes */
spin_lock_irqsave(&priv->driver_lock, flags);
lbs_deb_main("clearing pending commands\n");
list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
cmdnode->result = -ENOENT;
cmdnode->cmdwaitqwoken = 1;
wake_up_interruptible(&cmdnode->cmdwait_q);
}
/* Flush the command the card is currently processing */
if (priv->cur_cmd) {
lbs_deb_main("clearing current command\n");
priv->cur_cmd->result = -ENOENT;
priv->cur_cmd->cmdwaitqwoken = 1;
wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
}
lbs_deb_main("done clearing commands\n");
spin_unlock_irqrestore(&priv->driver_lock, flags);
unregister_netdev(dev);
out:
lbs_deb_leave(LBS_DEB_MAIN);
}
EXPORT_SYMBOL_GPL(lbs_stop_card);
void lbs_queue_event(struct lbs_private *priv, u32 event)
{
unsigned long flags;
lbs_deb_enter(LBS_DEB_THREAD);
spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->psstate == PS_STATE_SLEEP)
priv->psstate = PS_STATE_AWAKE;
kfifo_in(&priv->event_fifo, (unsigned char *) &event, sizeof(u32));
wake_up_interruptible(&priv->waitq);
spin_unlock_irqrestore(&priv->driver_lock, flags);
lbs_deb_leave(LBS_DEB_THREAD);
}
EXPORT_SYMBOL_GPL(lbs_queue_event);
void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx)
{
lbs_deb_enter(LBS_DEB_THREAD);
if (priv->psstate == PS_STATE_SLEEP)
priv->psstate = PS_STATE_AWAKE;
/* Swap buffers by flipping the response index */
BUG_ON(resp_idx > 1);
priv->resp_idx = resp_idx;
wake_up_interruptible(&priv->waitq);
lbs_deb_leave(LBS_DEB_THREAD);
}
EXPORT_SYMBOL_GPL(lbs_notify_command_response);
/**
* @brief Retrieves two-stage firmware
*
* @param dev A pointer to device structure
* @param user_helper User-defined helper firmware file
* @param user_mainfw User-defined main firmware file
* @param card_model Bus-specific card model ID used to filter firmware table
* elements
* @param fw_table Table of firmware file names and device model numbers
* terminated by an entry with a NULL helper name
* @param helper On success, the helper firmware; caller must free
* @param mainfw On success, the main firmware; caller must free
*
* @return 0 on success, non-zero on failure
*/
int lbs_get_firmware(struct device *dev, const char *user_helper,
const char *user_mainfw, u32 card_model,
const struct lbs_fw_table *fw_table,
const struct firmware **helper,
const struct firmware **mainfw)
{
const struct lbs_fw_table *iter;
int ret;
BUG_ON(helper == NULL);
BUG_ON(mainfw == NULL);
/* Try user-specified firmware first */
if (user_helper) {
ret = request_firmware(helper, user_helper, dev);
if (ret) {
lbs_pr_err("couldn't find helper firmware %s",
user_helper);
goto fail;
}
}
if (user_mainfw) {
ret = request_firmware(mainfw, user_mainfw, dev);
if (ret) {
lbs_pr_err("couldn't find main firmware %s",
user_mainfw);
goto fail;
}
}
if (*helper && *mainfw)
return 0;
/* Otherwise search for firmware to use. If neither the helper or
* the main firmware were specified by the user, then we need to
* make sure that found helper & main are from the same entry in
* fw_table.
*/
iter = fw_table;
while (iter && iter->helper) {
if (iter->model != card_model)
goto next;
if (*helper == NULL) {
ret = request_firmware(helper, iter->helper, dev);
if (ret)
goto next;
/* If the device has one-stage firmware (ie cf8305) and
* we've got it then we don't need to bother with the
* main firmware.
*/
if (iter->fwname == NULL)
return 0;
}
if (*mainfw == NULL) {
ret = request_firmware(mainfw, iter->fwname, dev);
if (ret && !user_helper) {
/* Clear the helper if it wasn't user-specified
* and the main firmware load failed, to ensure
* we don't have mismatched firmware pairs.
*/
release_firmware(*helper);
*helper = NULL;
}
}
if (*helper && *mainfw)
return 0;
next:
iter++;
}
fail:
/* Failed */
if (*helper) {
release_firmware(*helper);
*helper = NULL;
}
if (*mainfw) {
release_firmware(*mainfw);
*mainfw = NULL;
}
return -ENOENT;
}
EXPORT_SYMBOL_GPL(lbs_get_firmware);
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
memset(&confirm_sleep, 0, sizeof(confirm_sleep));
confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE);
confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep));
confirm_sleep.action = cpu_to_le16(PS_MODE_ACTION_SLEEP_CONFIRMED);
lbs_debugfs_init();
lbs_deb_leave(LBS_DEB_MAIN);
return 0;
}
static void __exit lbs_exit_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
lbs_debugfs_remove();
lbs_deb_leave(LBS_DEB_MAIN);
}
module_init(lbs_init_module);
module_exit(lbs_exit_module);
MODULE_DESCRIPTION("Libertas WLAN Driver Library");
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_LICENSE("GPL");