2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
linux-next/drivers/pwm/core.c
Linus Torvalds 3eb05225ee pwm: Changes for v3.9-rc1
A new driver has been added to support the PWM mode of the timer counter
 blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing
 the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained
 suspend and resume functionality.
 
 User drivers can now query the core for whether access to a PWM device
 will sleep (if the PWM chip is on a slow bus such as I2C or SPI).
 
 The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state
 in addition to the FB layer's blanking states.
 
 To round things off, a few fixes and cleanups are also included.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKxfbAAoJEN0jrNd/PrOhcwEP/0plVf30QDMhcan1GR3l+jmK
 3Q/cCNIWEZ75mRu+FtVYKUOduxkCOHR6LM4C2ScGnnpsS/X5oitc45FrblIwQaEI
 UeWVxDqI+pEp+rCdYVCND4lih60FJU0Cct0zZL2db4D4idF+8FRChhzwzSXhajnj
 ZZqz782Y2ig3YTLHtVGT1pp61DKxdu1Gz4U+fxo4G1/fnkquCYDzbCQovcmPSnnF
 gYB8hfxgT9JIt2cHrK6eKCHBF/4GToU+x5zDV2Ub15C2K/UQ+qgw82yl8MNd/ZS5
 rFA06iW3icnJRRc8u6hu9WVjNVNTBrUqUlFhctNB01d5jF4R6uR6aEvovT9xe8NW
 Wa5v5WrjnL6SWpZVwb/3kwwJmkeU9zKESQt5KUw3VKnT8yr2BfxcH1gJIiuW6wK7
 uYqknAvt2rwMEGzaKZJmQH682wNMxpJirs8hG9VjJc/v7AOnk6586HbRupAq8wWZ
 qK4n1Fto9RCg+b6e/hDId7+mN1GEcA5B8BOotPQ6ud+cinDZBKSbCSHhQG2LQ++F
 m81BbL82H2R2ICRoYNA74/bKq5OVOFFqHLHg5bUrG7ikdNbYOTK/4dF9qSS7DnT3
 Bi6WnKpOtfpWbHBnDunP2vBFo3f+gXmbLJdgarxk7mneV8wp0GY6TYI1awWn0hI9
 82JP3yiK5kW2JZv92o0H
 =Fcxi
 -----END PGP SIGNATURE-----

Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver
2013-02-26 09:34:29 -08:00

867 lines
19 KiB
C

/*
* Generic pwmlib implementation
*
* Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de>
* Copyright (C) 2011-2012 Avionic Design GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/pwm.h>
#include <linux/radix-tree.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#define MAX_PWMS 1024
/* flags in the third cell of the DT PWM specifier */
#define PWM_SPEC_POLARITY (1 << 0)
static DEFINE_MUTEX(pwm_lookup_lock);
static LIST_HEAD(pwm_lookup_list);
static DEFINE_MUTEX(pwm_lock);
static LIST_HEAD(pwm_chips);
static DECLARE_BITMAP(allocated_pwms, MAX_PWMS);
static RADIX_TREE(pwm_tree, GFP_KERNEL);
static struct pwm_device *pwm_to_device(unsigned int pwm)
{
return radix_tree_lookup(&pwm_tree, pwm);
}
static int alloc_pwms(int pwm, unsigned int count)
{
unsigned int from = 0;
unsigned int start;
if (pwm >= MAX_PWMS)
return -EINVAL;
if (pwm >= 0)
from = pwm;
start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from,
count, 0);
if (pwm >= 0 && start != pwm)
return -EEXIST;
if (start + count > MAX_PWMS)
return -ENOSPC;
return start;
}
static void free_pwms(struct pwm_chip *chip)
{
unsigned int i;
for (i = 0; i < chip->npwm; i++) {
struct pwm_device *pwm = &chip->pwms[i];
radix_tree_delete(&pwm_tree, pwm->pwm);
}
bitmap_clear(allocated_pwms, chip->base, chip->npwm);
kfree(chip->pwms);
chip->pwms = NULL;
}
static struct pwm_chip *pwmchip_find_by_name(const char *name)
{
struct pwm_chip *chip;
if (!name)
return NULL;
mutex_lock(&pwm_lock);
list_for_each_entry(chip, &pwm_chips, list) {
const char *chip_name = dev_name(chip->dev);
if (chip_name && strcmp(chip_name, name) == 0) {
mutex_unlock(&pwm_lock);
return chip;
}
}
mutex_unlock(&pwm_lock);
return NULL;
}
static int pwm_device_request(struct pwm_device *pwm, const char *label)
{
int err;
if (test_bit(PWMF_REQUESTED, &pwm->flags))
return -EBUSY;
if (!try_module_get(pwm->chip->ops->owner))
return -ENODEV;
if (pwm->chip->ops->request) {
err = pwm->chip->ops->request(pwm->chip, pwm);
if (err) {
module_put(pwm->chip->ops->owner);
return err;
}
}
set_bit(PWMF_REQUESTED, &pwm->flags);
pwm->label = label;
return 0;
}
struct pwm_device *
of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
{
struct pwm_device *pwm;
if (pc->of_pwm_n_cells < 3)
return ERR_PTR(-EINVAL);
if (args->args[0] >= pc->npwm)
return ERR_PTR(-EINVAL);
pwm = pwm_request_from_chip(pc, args->args[0], NULL);
if (IS_ERR(pwm))
return pwm;
pwm_set_period(pwm, args->args[1]);
if (args->args[2] & PWM_SPEC_POLARITY)
pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
else
pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
return pwm;
}
EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
static struct pwm_device *
of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
{
struct pwm_device *pwm;
if (pc->of_pwm_n_cells < 2)
return ERR_PTR(-EINVAL);
if (args->args[0] >= pc->npwm)
return ERR_PTR(-EINVAL);
pwm = pwm_request_from_chip(pc, args->args[0], NULL);
if (IS_ERR(pwm))
return pwm;
pwm_set_period(pwm, args->args[1]);
return pwm;
}
static void of_pwmchip_add(struct pwm_chip *chip)
{
if (!chip->dev || !chip->dev->of_node)
return;
if (!chip->of_xlate) {
chip->of_xlate = of_pwm_simple_xlate;
chip->of_pwm_n_cells = 2;
}
of_node_get(chip->dev->of_node);
}
static void of_pwmchip_remove(struct pwm_chip *chip)
{
if (chip->dev && chip->dev->of_node)
of_node_put(chip->dev->of_node);
}
/**
* pwm_set_chip_data() - set private chip data for a PWM
* @pwm: PWM device
* @data: pointer to chip-specific data
*/
int pwm_set_chip_data(struct pwm_device *pwm, void *data)
{
if (!pwm)
return -EINVAL;
pwm->chip_data = data;
return 0;
}
EXPORT_SYMBOL_GPL(pwm_set_chip_data);
/**
* pwm_get_chip_data() - get private chip data for a PWM
* @pwm: PWM device
*/
void *pwm_get_chip_data(struct pwm_device *pwm)
{
return pwm ? pwm->chip_data : NULL;
}
EXPORT_SYMBOL_GPL(pwm_get_chip_data);
/**
* pwmchip_add() - register a new PWM chip
* @chip: the PWM chip to add
*
* Register a new PWM chip. If chip->base < 0 then a dynamically assigned base
* will be used.
*/
int pwmchip_add(struct pwm_chip *chip)
{
struct pwm_device *pwm;
unsigned int i;
int ret;
if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
!chip->ops->enable || !chip->ops->disable)
return -EINVAL;
mutex_lock(&pwm_lock);
ret = alloc_pwms(chip->base, chip->npwm);
if (ret < 0)
goto out;
chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL);
if (!chip->pwms) {
ret = -ENOMEM;
goto out;
}
chip->base = ret;
for (i = 0; i < chip->npwm; i++) {
pwm = &chip->pwms[i];
pwm->chip = chip;
pwm->pwm = chip->base + i;
pwm->hwpwm = i;
radix_tree_insert(&pwm_tree, pwm->pwm, pwm);
}
bitmap_set(allocated_pwms, chip->base, chip->npwm);
INIT_LIST_HEAD(&chip->list);
list_add(&chip->list, &pwm_chips);
ret = 0;
if (IS_ENABLED(CONFIG_OF))
of_pwmchip_add(chip);
out:
mutex_unlock(&pwm_lock);
return ret;
}
EXPORT_SYMBOL_GPL(pwmchip_add);
/**
* pwmchip_remove() - remove a PWM chip
* @chip: the PWM chip to remove
*
* Removes a PWM chip. This function may return busy if the PWM chip provides
* a PWM device that is still requested.
*/
int pwmchip_remove(struct pwm_chip *chip)
{
unsigned int i;
int ret = 0;
mutex_lock(&pwm_lock);
for (i = 0; i < chip->npwm; i++) {
struct pwm_device *pwm = &chip->pwms[i];
if (test_bit(PWMF_REQUESTED, &pwm->flags)) {
ret = -EBUSY;
goto out;
}
}
list_del_init(&chip->list);
if (IS_ENABLED(CONFIG_OF))
of_pwmchip_remove(chip);
free_pwms(chip);
out:
mutex_unlock(&pwm_lock);
return ret;
}
EXPORT_SYMBOL_GPL(pwmchip_remove);
/**
* pwm_request() - request a PWM device
* @pwm_id: global PWM device index
* @label: PWM device label
*
* This function is deprecated, use pwm_get() instead.
*/
struct pwm_device *pwm_request(int pwm, const char *label)
{
struct pwm_device *dev;
int err;
if (pwm < 0 || pwm >= MAX_PWMS)
return ERR_PTR(-EINVAL);
mutex_lock(&pwm_lock);
dev = pwm_to_device(pwm);
if (!dev) {
dev = ERR_PTR(-EPROBE_DEFER);
goto out;
}
err = pwm_device_request(dev, label);
if (err < 0)
dev = ERR_PTR(err);
out:
mutex_unlock(&pwm_lock);
return dev;
}
EXPORT_SYMBOL_GPL(pwm_request);
/**
* pwm_request_from_chip() - request a PWM device relative to a PWM chip
* @chip: PWM chip
* @index: per-chip index of the PWM to request
* @label: a literal description string of this PWM
*
* Returns the PWM at the given index of the given PWM chip. A negative error
* code is returned if the index is not valid for the specified PWM chip or
* if the PWM device cannot be requested.
*/
struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
unsigned int index,
const char *label)
{
struct pwm_device *pwm;
int err;
if (!chip || index >= chip->npwm)
return ERR_PTR(-EINVAL);
mutex_lock(&pwm_lock);
pwm = &chip->pwms[index];
err = pwm_device_request(pwm, label);
if (err < 0)
pwm = ERR_PTR(err);
mutex_unlock(&pwm_lock);
return pwm;
}
EXPORT_SYMBOL_GPL(pwm_request_from_chip);
/**
* pwm_free() - free a PWM device
* @pwm: PWM device
*
* This function is deprecated, use pwm_put() instead.
*/
void pwm_free(struct pwm_device *pwm)
{
pwm_put(pwm);
}
EXPORT_SYMBOL_GPL(pwm_free);
/**
* pwm_config() - change a PWM device configuration
* @pwm: PWM device
* @duty_ns: "on" time (in nanoseconds)
* @period_ns: duration (in nanoseconds) of one cycle
*/
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
{
if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
return -EINVAL;
return pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
}
EXPORT_SYMBOL_GPL(pwm_config);
/**
* pwm_set_polarity() - configure the polarity of a PWM signal
* @pwm: PWM device
* @polarity: new polarity of the PWM signal
*
* Note that the polarity cannot be configured while the PWM device is enabled
*/
int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
{
if (!pwm || !pwm->chip->ops)
return -EINVAL;
if (!pwm->chip->ops->set_polarity)
return -ENOSYS;
if (test_bit(PWMF_ENABLED, &pwm->flags))
return -EBUSY;
return pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
}
EXPORT_SYMBOL_GPL(pwm_set_polarity);
/**
* pwm_enable() - start a PWM output toggling
* @pwm: PWM device
*/
int pwm_enable(struct pwm_device *pwm)
{
if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
return pwm->chip->ops->enable(pwm->chip, pwm);
return pwm ? 0 : -EINVAL;
}
EXPORT_SYMBOL_GPL(pwm_enable);
/**
* pwm_disable() - stop a PWM output toggling
* @pwm: PWM device
*/
void pwm_disable(struct pwm_device *pwm)
{
if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags))
pwm->chip->ops->disable(pwm->chip, pwm);
}
EXPORT_SYMBOL_GPL(pwm_disable);
static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
{
struct pwm_chip *chip;
mutex_lock(&pwm_lock);
list_for_each_entry(chip, &pwm_chips, list)
if (chip->dev && chip->dev->of_node == np) {
mutex_unlock(&pwm_lock);
return chip;
}
mutex_unlock(&pwm_lock);
return ERR_PTR(-EPROBE_DEFER);
}
/**
* of_pwm_get() - request a PWM via the PWM framework
* @np: device node to get the PWM from
* @con_id: consumer name
*
* Returns the PWM device parsed from the phandle and index specified in the
* "pwms" property of a device tree node or a negative error-code on failure.
* Values parsed from the device tree are stored in the returned PWM device
* object.
*
* If con_id is NULL, the first PWM device listed in the "pwms" property will
* be requested. Otherwise the "pwm-names" property is used to do a reverse
* lookup of the PWM index. This also means that the "pwm-names" property
* becomes mandatory for devices that look up the PWM device via the con_id
* parameter.
*/
struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
{
struct pwm_device *pwm = NULL;
struct of_phandle_args args;
struct pwm_chip *pc;
int index = 0;
int err;
if (con_id) {
index = of_property_match_string(np, "pwm-names", con_id);
if (index < 0)
return ERR_PTR(index);
}
err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
&args);
if (err) {
pr_debug("%s(): can't parse \"pwms\" property\n", __func__);
return ERR_PTR(err);
}
pc = of_node_to_pwmchip(args.np);
if (IS_ERR(pc)) {
pr_debug("%s(): PWM chip not found\n", __func__);
pwm = ERR_CAST(pc);
goto put;
}
if (args.args_count != pc->of_pwm_n_cells) {
pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
args.np->full_name);
pwm = ERR_PTR(-EINVAL);
goto put;
}
pwm = pc->of_xlate(pc, &args);
if (IS_ERR(pwm))
goto put;
/*
* If a consumer name was not given, try to look it up from the
* "pwm-names" property if it exists. Otherwise use the name of
* the user device node.
*/
if (!con_id) {
err = of_property_read_string_index(np, "pwm-names", index,
&con_id);
if (err < 0)
con_id = np->name;
}
pwm->label = con_id;
put:
of_node_put(args.np);
return pwm;
}
EXPORT_SYMBOL_GPL(of_pwm_get);
/**
* pwm_add_table() - register PWM device consumers
* @table: array of consumers to register
* @num: number of consumers in table
*/
void __init pwm_add_table(struct pwm_lookup *table, size_t num)
{
mutex_lock(&pwm_lookup_lock);
while (num--) {
list_add_tail(&table->list, &pwm_lookup_list);
table++;
}
mutex_unlock(&pwm_lookup_lock);
}
/**
* pwm_get() - look up and request a PWM device
* @dev: device for PWM consumer
* @con_id: consumer name
*
* Lookup is first attempted using DT. If the device was not instantiated from
* a device tree, a PWM chip and a relative index is looked up via a table
* supplied by board setup code (see pwm_add_table()).
*
* Once a PWM chip has been found the specified PWM device will be requested
* and is ready to be used.
*/
struct pwm_device *pwm_get(struct device *dev, const char *con_id)
{
struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
const char *dev_id = dev ? dev_name(dev) : NULL;
struct pwm_chip *chip = NULL;
unsigned int index = 0;
unsigned int best = 0;
struct pwm_lookup *p;
unsigned int match;
/* look up via DT first */
if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
return of_pwm_get(dev->of_node, con_id);
/*
* We look up the provider in the static table typically provided by
* board setup code. We first try to lookup the consumer device by
* name. If the consumer device was passed in as NULL or if no match
* was found, we try to find the consumer by directly looking it up
* by name.
*
* If a match is found, the provider PWM chip is looked up by name
* and a PWM device is requested using the PWM device per-chip index.
*
* The lookup algorithm was shamelessly taken from the clock
* framework:
*
* We do slightly fuzzy matching here:
* An entry with a NULL ID is assumed to be a wildcard.
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following order
* of precedence: dev+con > dev only > con only.
*/
mutex_lock(&pwm_lookup_lock);
list_for_each_entry(p, &pwm_lookup_list, list) {
match = 0;
if (p->dev_id) {
if (!dev_id || strcmp(p->dev_id, dev_id))
continue;
match += 2;
}
if (p->con_id) {
if (!con_id || strcmp(p->con_id, con_id))
continue;
match += 1;
}
if (match > best) {
chip = pwmchip_find_by_name(p->provider);
index = p->index;
if (match != 3)
best = match;
else
break;
}
}
if (chip)
pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
mutex_unlock(&pwm_lookup_lock);
return pwm;
}
EXPORT_SYMBOL_GPL(pwm_get);
/**
* pwm_put() - release a PWM device
* @pwm: PWM device
*/
void pwm_put(struct pwm_device *pwm)
{
if (!pwm)
return;
mutex_lock(&pwm_lock);
if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) {
pr_warn("PWM device already freed\n");
goto out;
}
if (pwm->chip->ops->free)
pwm->chip->ops->free(pwm->chip, pwm);
pwm->label = NULL;
module_put(pwm->chip->ops->owner);
out:
mutex_unlock(&pwm_lock);
}
EXPORT_SYMBOL_GPL(pwm_put);
static void devm_pwm_release(struct device *dev, void *res)
{
pwm_put(*(struct pwm_device **)res);
}
/**
* devm_pwm_get() - resource managed pwm_get()
* @dev: device for PWM consumer
* @con_id: consumer name
*
* This function performs like pwm_get() but the acquired PWM device will
* automatically be released on driver detach.
*/
struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
{
struct pwm_device **ptr, *pwm;
ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL);
if (!ptr)
return ERR_PTR(-ENOMEM);
pwm = pwm_get(dev, con_id);
if (!IS_ERR(pwm)) {
*ptr = pwm;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
return pwm;
}
EXPORT_SYMBOL_GPL(devm_pwm_get);
/**
* devm_of_pwm_get() - resource managed of_pwm_get()
* @dev: device for PWM consumer
* @np: device node to get the PWM from
* @con_id: consumer name
*
* This function performs like of_pwm_get() but the acquired PWM device will
* automatically be released on driver detach.
*/
struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
const char *con_id)
{
struct pwm_device **ptr, *pwm;
ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL);
if (!ptr)
return ERR_PTR(-ENOMEM);
pwm = of_pwm_get(np, con_id);
if (!IS_ERR(pwm)) {
*ptr = pwm;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
return pwm;
}
EXPORT_SYMBOL_GPL(devm_of_pwm_get);
static int devm_pwm_match(struct device *dev, void *res, void *data)
{
struct pwm_device **p = res;
if (WARN_ON(!p || !*p))
return 0;
return *p == data;
}
/**
* devm_pwm_put() - resource managed pwm_put()
* @dev: device for PWM consumer
* @pwm: PWM device
*
* Release a PWM previously allocated using devm_pwm_get(). Calling this
* function is usually not needed because devm-allocated resources are
* automatically released on driver detach.
*/
void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
{
WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm));
}
EXPORT_SYMBOL_GPL(devm_pwm_put);
/**
* pwm_can_sleep() - report whether PWM access will sleep
* @pwm: PWM device
*
* It returns true if accessing the PWM can sleep, false otherwise.
*/
bool pwm_can_sleep(struct pwm_device *pwm)
{
return pwm->chip->can_sleep;
}
EXPORT_SYMBOL_GPL(pwm_can_sleep);
#ifdef CONFIG_DEBUG_FS
static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
{
unsigned int i;
for (i = 0; i < chip->npwm; i++) {
struct pwm_device *pwm = &chip->pwms[i];
seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
if (test_bit(PWMF_REQUESTED, &pwm->flags))
seq_printf(s, " requested");
if (test_bit(PWMF_ENABLED, &pwm->flags))
seq_printf(s, " enabled");
seq_printf(s, "\n");
}
}
static void *pwm_seq_start(struct seq_file *s, loff_t *pos)
{
mutex_lock(&pwm_lock);
s->private = "";
return seq_list_start(&pwm_chips, *pos);
}
static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
s->private = "\n";
return seq_list_next(v, &pwm_chips, pos);
}
static void pwm_seq_stop(struct seq_file *s, void *v)
{
mutex_unlock(&pwm_lock);
}
static int pwm_seq_show(struct seq_file *s, void *v)
{
struct pwm_chip *chip = list_entry(v, struct pwm_chip, list);
seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private,
chip->dev->bus ? chip->dev->bus->name : "no-bus",
dev_name(chip->dev), chip->npwm,
(chip->npwm != 1) ? "s" : "");
if (chip->ops->dbg_show)
chip->ops->dbg_show(chip, s);
else
pwm_dbg_show(chip, s);
return 0;
}
static const struct seq_operations pwm_seq_ops = {
.start = pwm_seq_start,
.next = pwm_seq_next,
.stop = pwm_seq_stop,
.show = pwm_seq_show,
};
static int pwm_seq_open(struct inode *inode, struct file *file)
{
return seq_open(file, &pwm_seq_ops);
}
static const struct file_operations pwm_debugfs_ops = {
.owner = THIS_MODULE,
.open = pwm_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
static int __init pwm_debugfs_init(void)
{
debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
&pwm_debugfs_ops);
return 0;
}
subsys_initcall(pwm_debugfs_init);
#endif /* CONFIG_DEBUG_FS */