2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/usb/dwc3/dwc3-exynos.c
Vivek Gautam b0e45ddb96 usb: dwc3: exynos/omap: Change platform device IDs for no_op_xceive to AUTO
Multiple dwc3 probe calls try to allocate no_op_xceive platform
device. Having static IDs for these will throw sysfs error -EEXIST.
Changing these static platform device IDs to AUTO to enable
multiple dwc3 controller support on a SoC.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 13:19:50 +02:00

207 lines
4.5 KiB
C

/**
* dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-exynos.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
#include "core.h"
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
struct platform_device *usb3_phy;
struct device *dev;
struct clk *clk;
};
static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
int ret;
memset(&pdata, 0x00, sizeof(pdata));
pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
if (!pdev)
return -ENOMEM;
exynos->usb2_phy = pdev;
pdata.type = USB_PHY_TYPE_USB2;
ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata));
if (ret)
goto err1;
pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
if (!pdev) {
ret = -ENOMEM;
goto err1;
}
exynos->usb3_phy = pdev;
pdata.type = USB_PHY_TYPE_USB3;
ret = platform_device_add_data(exynos->usb3_phy, &pdata, sizeof(pdata));
if (ret)
goto err2;
ret = platform_device_add(exynos->usb2_phy);
if (ret)
goto err2;
ret = platform_device_add(exynos->usb3_phy);
if (ret)
goto err3;
return 0;
err3:
platform_device_del(exynos->usb2_phy);
err2:
platform_device_put(exynos->usb3_phy);
err1:
platform_device_put(exynos->usb2_phy);
return ret;
}
static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct platform_device *dwc3;
struct dwc3_exynos *exynos;
struct clk *clk;
struct device *dev = &pdev->dev;
int ret = -ENOMEM;
exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL);
if (!exynos) {
dev_err(dev, "not enough memory\n");
return -ENOMEM;
}
/*
* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &dwc3_exynos_dma_mask;
platform_set_drvdata(pdev, exynos);
ret = dwc3_exynos_register_phys(exynos);
if (ret) {
dev_err(dev, "couldn't register PHYs\n");
return ret;
}
dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc3) {
dev_err(dev, "couldn't allocate dwc3 device\n");
return -ENOMEM;
}
clk = devm_clk_get(dev, "usbdrd30");
if (IS_ERR(clk)) {
dev_err(dev, "couldn't get clock\n");
ret = -EINVAL;
goto err1;
}
dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
dwc3->dev.parent = dev;
dwc3->dev.dma_mask = dev->dma_mask;
dwc3->dev.dma_parms = dev->dma_parms;
exynos->dwc3 = dwc3;
exynos->dev = dev;
exynos->clk = clk;
clk_enable(exynos->clk);
ret = platform_device_add_resources(dwc3, pdev->resource,
pdev->num_resources);
if (ret) {
dev_err(dev, "couldn't add resources to dwc3 device\n");
goto err2;
}
ret = platform_device_add(dwc3);
if (ret) {
dev_err(dev, "failed to register dwc3 device\n");
goto err2;
}
return 0;
err2:
clk_disable(clk);
err1:
platform_device_put(dwc3);
return ret;
}
static int dwc3_exynos_remove(struct platform_device *pdev)
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
platform_device_unregister(exynos->dwc3);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
clk_disable(exynos->clk);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id exynos_dwc3_match[] = {
{ .compatible = "samsung,exynos5250-dwusb3" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
#endif
static struct platform_driver dwc3_exynos_driver = {
.probe = dwc3_exynos_probe,
.remove = dwc3_exynos_remove,
.driver = {
.name = "exynos-dwc3",
.of_match_table = of_match_ptr(exynos_dwc3_match),
},
};
module_platform_driver(dwc3_exynos_driver);
MODULE_ALIAS("platform:exynos-dwc3");
MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer");