mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
8030e774e2
This struct is lacking documentation. Add it. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
206 lines
7.5 KiB
C
206 lines
7.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* descriptions for simple tuners.
|
|
*/
|
|
|
|
#ifndef __TUNER_TYPES_H__
|
|
#define __TUNER_TYPES_H__
|
|
|
|
/**
|
|
* enum param_type - type of the tuner pameters
|
|
*
|
|
* @TUNER_PARAM_TYPE_RADIO: Tuner params are for FM and/or AM radio
|
|
* @TUNER_PARAM_TYPE_PAL: Tuner params are for PAL color TV standard
|
|
* @TUNER_PARAM_TYPE_SECAM: Tuner params are for SECAM color TV standard
|
|
* @TUNER_PARAM_TYPE_NTSC: Tuner params are for NTSC color TV standard
|
|
* @TUNER_PARAM_TYPE_DIGITAL: Tuner params are for digital TV
|
|
*/
|
|
enum param_type {
|
|
TUNER_PARAM_TYPE_RADIO,
|
|
TUNER_PARAM_TYPE_PAL,
|
|
TUNER_PARAM_TYPE_SECAM,
|
|
TUNER_PARAM_TYPE_NTSC,
|
|
TUNER_PARAM_TYPE_DIGITAL,
|
|
};
|
|
|
|
/**
|
|
* struct tuner_range - define the frequencies supported by the tuner
|
|
*
|
|
* @limit: Max frequency supported by that range, in 62.5 kHz
|
|
* (TV) or 62.5 Hz (Radio), as defined by
|
|
* V4L2_TUNER_CAP_LOW.
|
|
* @config: Value of the band switch byte (BB) to setup this mode.
|
|
* @cb: Value of the CB byte to setup this mode.
|
|
*
|
|
* Please notice that digital tuners like xc3028/xc4000/xc5000 don't use
|
|
* those ranges, as they're defined inside the driver. This is used by
|
|
* analog tuners that are compatible with the "Philips way" to setup the
|
|
* tuners. On those devices, the tuner set is done via 4 bytes:
|
|
*
|
|
* #) divider byte1 (DB1)
|
|
* #) divider byte 2 (DB2)
|
|
* #) Control byte (CB)
|
|
* #) band switch byte (BB)
|
|
*
|
|
* Some tuners also have an additional optional Auxiliary byte (AB).
|
|
*/
|
|
struct tuner_range {
|
|
unsigned short limit;
|
|
unsigned char config;
|
|
unsigned char cb;
|
|
};
|
|
|
|
/**
|
|
* struct tuner_params - Parameters to be used to setup the tuner. Those
|
|
* are used by drivers/media/tuners/tuner-types.c in
|
|
* order to specify the tuner properties. Most of
|
|
* the parameters are for tuners based on tda9887 IF-PLL
|
|
* multi-standard analog TV/Radio demodulator, with is
|
|
* very common on legacy analog tuners.
|
|
*
|
|
* @type: Type of the tuner parameters, as defined at
|
|
* enum param_type. If the tuner supports multiple
|
|
* standards, an array should be used, with one
|
|
* row per different standard.
|
|
* @cb_first_if_lower_freq: Many Philips-based tuners have a comment in
|
|
* their datasheet like
|
|
* "For channel selection involving band
|
|
* switching, and to ensure smooth tuning to the
|
|
* desired channel without causing unnecessary
|
|
* charge pump action, it is recommended to
|
|
* consider the difference between wanted channel
|
|
* frequency and the current channel frequency.
|
|
* Unnecessary charge pump action will result
|
|
* in very low tuning voltage which may drive the
|
|
* oscillator to extreme conditions".
|
|
* Set cb_first_if_lower_freq to 1, if this check
|
|
* is required for this tuner. I tested this for
|
|
* PAL by first setting the TV frequency to
|
|
* 203 MHz and then switching to 96.6 MHz FM
|
|
* radio. The result was static unless the
|
|
* control byte was sent first.
|
|
* @has_tda9887: Set to 1 if this tuner uses a tda9887
|
|
* @port1_fm_high_sensitivity: Many Philips tuners use tda9887 PORT1 to select
|
|
* the FM radio sensitivity. If this setting is 1,
|
|
* then set PORT1 to 1 to get proper FM reception.
|
|
* @port2_fm_high_sensitivity: Some Philips tuners use tda9887 PORT2 to select
|
|
* the FM radio sensitivity. If this setting is 1,
|
|
* then set PORT2 to 1 to get proper FM reception.
|
|
* @fm_gain_normal: Some Philips tuners use tda9887 cGainNormal to
|
|
* select the FM radio sensitivity. If this
|
|
* setting is 1, e register will use cGainNormal
|
|
* instead of cGainLow.
|
|
* @intercarrier_mode: Most tuners with a tda9887 use QSS mode.
|
|
* Some (cheaper) tuners use Intercarrier mode.
|
|
* If this setting is 1, then the tuner needs to
|
|
* be set to intercarrier mode.
|
|
* @port1_active: This setting sets the default value for PORT1.
|
|
* 0 means inactive, 1 means active. Note: the
|
|
* actual bit value written to the tda9887 is
|
|
* inverted. So a 0 here means a 1 in the B6 bit.
|
|
* @port2_active: This setting sets the default value for PORT2.
|
|
* 0 means inactive, 1 means active. Note: the
|
|
* actual bit value written to the tda9887 is
|
|
* inverted. So a 0 here means a 1 in the B7 bit.
|
|
* @port1_invert_for_secam_lc: Sometimes PORT1 is inverted when the SECAM-L'
|
|
* standard is selected. Set this bit to 1 if this
|
|
* is needed.
|
|
* @port2_invert_for_secam_lc: Sometimes PORT2 is inverted when the SECAM-L'
|
|
* standard is selected. Set this bit to 1 if this
|
|
* is needed.
|
|
* @port1_set_for_fm_mono: Some cards require PORT1 to be 1 for mono Radio
|
|
* FM and 0 for stereo.
|
|
* @default_pll_gating_18: Select 18% (or according to datasheet 0%)
|
|
* L standard PLL gating, vs the driver default
|
|
* of 36%.
|
|
* @radio_if: IF to use in radio mode. Tuners with a
|
|
* separate radio IF filter seem to use 10.7,
|
|
* while those without use 33.3 for PAL/SECAM
|
|
* tuners and 41.3 for NTSC tuners.
|
|
* 0 = 10.7, 1 = 33.3, 2 = 41.3
|
|
* @default_top_low: Default tda9887 TOP value in dB for the low
|
|
* band. Default is 0. Range: -16:+15
|
|
* @default_top_mid: Default tda9887 TOP value in dB for the mid
|
|
* band. Default is 0. Range: -16:+15
|
|
* @default_top_high: Default tda9887 TOP value in dB for the high
|
|
* band. Default is 0. Range: -16:+15
|
|
* @default_top_secam_low: Default tda9887 TOP value in dB for SECAM-L/L'
|
|
* for the low band. Default is 0. Several tuners
|
|
* require a different TOP value for the
|
|
* SECAM-L/L' standards. Range: -16:+15
|
|
* @default_top_secam_mid: Default tda9887 TOP value in dB for SECAM-L/L'
|
|
* for the mid band. Default is 0. Several tuners
|
|
* require a different TOP value for the
|
|
* SECAM-L/L' standards. Range: -16:+15
|
|
* @default_top_secam_high: Default tda9887 TOP value in dB for SECAM-L/L'
|
|
* for the high band. Default is 0. Several tuners
|
|
* require a different TOP value for the
|
|
* SECAM-L/L' standards. Range: -16:+15
|
|
* @iffreq: Intermediate frequency (IF) used by the tuner
|
|
* on digital mode.
|
|
* @count: Size of the ranges array.
|
|
* @ranges: Array with the frequency ranges supported by
|
|
* the tuner.
|
|
*/
|
|
struct tuner_params {
|
|
enum param_type type;
|
|
|
|
unsigned int cb_first_if_lower_freq:1;
|
|
unsigned int has_tda9887:1;
|
|
unsigned int port1_fm_high_sensitivity:1;
|
|
unsigned int port2_fm_high_sensitivity:1;
|
|
unsigned int fm_gain_normal:1;
|
|
unsigned int intercarrier_mode:1;
|
|
unsigned int port1_active:1;
|
|
unsigned int port2_active:1;
|
|
unsigned int port1_invert_for_secam_lc:1;
|
|
unsigned int port2_invert_for_secam_lc:1;
|
|
unsigned int port1_set_for_fm_mono:1;
|
|
unsigned int default_pll_gating_18:1;
|
|
unsigned int radio_if:2;
|
|
signed int default_top_low:5;
|
|
signed int default_top_mid:5;
|
|
signed int default_top_high:5;
|
|
signed int default_top_secam_low:5;
|
|
signed int default_top_secam_mid:5;
|
|
signed int default_top_secam_high:5;
|
|
|
|
u16 iffreq;
|
|
|
|
unsigned int count;
|
|
struct tuner_range *ranges;
|
|
};
|
|
|
|
/**
|
|
* struct tunertype - describes the known tuners.
|
|
*
|
|
* @name: string with the tuner's name.
|
|
* @count: size of &struct tuner_params array.
|
|
* @params: pointer to &struct tuner_params array.
|
|
*
|
|
* @min: minimal tuner frequency, in 62.5 kHz step.
|
|
* should be multiplied to 16 to convert to MHz.
|
|
* @max: minimal tuner frequency, in 62.5 kHz step.
|
|
* Should be multiplied to 16 to convert to MHz.
|
|
* @stepsize: frequency step, in Hz.
|
|
* @initdata: optional byte sequence to initialize the tuner.
|
|
* @sleepdata: optional byte sequence to power down the tuner.
|
|
*/
|
|
struct tunertype {
|
|
char *name;
|
|
unsigned int count;
|
|
struct tuner_params *params;
|
|
|
|
u16 min;
|
|
u16 max;
|
|
u32 stepsize;
|
|
|
|
u8 *initdata;
|
|
u8 *sleepdata;
|
|
};
|
|
|
|
extern struct tunertype tuners[];
|
|
extern unsigned const int tuner_count;
|
|
|
|
#endif
|