renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
Code
e1e22df138
linux-next/arch/arm/boot/dts/stih416-pinctrl.dtsi
Lee Jones 77f8d9b7e6 ARM: STi: stih416: Add support for the FSM Serial Flash Controller 
Here we add the necessary device nodes required for successful device
probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2).

Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by Angus Clark <angus.clark@st.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-27 02:01:05 +01:00

549 lines
13 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2013 STMicroelectronics Limited.
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
aliases {
gpio0 = &PIO0;
gpio1 = &PIO1;
gpio2 = &PIO2;
gpio3 = &PIO3;
gpio4 = &PIO4;
gpio5 = &PIO40;
gpio6 = &PIO5;
gpio7 = &PIO6;
gpio8 = &PIO7;
gpio9 = &PIO8;
gpio10 = &PIO9;
gpio11 = &PIO10;
gpio12 = &PIO11;
gpio13 = &PIO12;
gpio14 = &PIO30;
gpio15 = &PIO31;
gpio16 = &PIO13;
gpio17 = &PIO14;
gpio18 = &PIO15;
gpio19 = &PIO16;
gpio20 = &PIO17;
gpio21 = &PIO18;
gpio22 = &PIO100;
gpio23 = &PIO101;
gpio24 = &PIO102;
gpio25 = &PIO103;
gpio26 = &PIO104;
gpio27 = &PIO105;
gpio28 = &PIO106;
gpio29 = &PIO107;
};
soc {
pin-controller-sbc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih416-sbc-pinctrl";
st,syscfg = <&syscfg_sbc>;
reg = <0xfe61f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
interrupts-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
PIO0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
PIO1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
PIO2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
PIO3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
PIO4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
PIO40: gpio@fe615000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO40";
st,retime-pin-mask = <0x7f>;
};
rc{
pinctrl_ir: ir0 {
st,pins {
ir = <&PIO4 0 ALT2 IN>;
};
};
};
sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 {
st,pins {
tx = <&PIO2 6 ALT3 OUT>;
rx = <&PIO2 7 ALT3 IN>;
};
};
};
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
sda = <&PIO4 6 ALT1 BIDIR>;
scl = <&PIO4 5 ALT1 BIDIR>;
};
};
};
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
sda = <&PIO3 2 ALT2 BIDIR>;
scl = <&PIO3 1 ALT2 BIDIR>;
};
};
};
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
col = <&PIO0 7 ALT1 IN BYPASS 1000>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
};
pin-controller-front {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih416-front-pinctrl";
st,syscfg = <&syscfg_front>;
reg = <0xfee0f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
interrupts-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
PIO5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO5";
};
PIO6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
PIO7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
PIO8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
PIO9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
PIO10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
PIO11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
PIO12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
PIO30: gpio@fee08000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x100>;
st,bank-name = "PIO30";
};
PIO31: gpio@fee09000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
sda = <&PIO9 3 ALT1 BIDIR>;
scl = <&PIO9 2 ALT1 BIDIR>;
};
};
};
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
sda = <&PIO12 1 ALT1 BIDIR>;
scl = <&PIO12 0 ALT1 BIDIR>;
};
};
};
fsm {
pinctrl_fsm: fsm {
st,pins {
spi-fsm-clk = <&PIO12 2 ALT1 OUT>;
spi-fsm-cs = <&PIO12 3 ALT1 OUT>;
spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
spi-fsm-miso = <&PIO12 5 ALT1 IN>;
spi-fsm-hol = <&PIO12 6 ALT1 OUT>;
spi-fsm-wp = <&PIO12 7 ALT1 OUT>;
};
};
};
};
pin-controller-rear {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih416-rear-pinctrl";
st,syscfg = <&syscfg_rear>;
reg = <0xfe82f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupts-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
PIO13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO13";
};
PIO14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
PIO15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
PIO16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
PIO17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
PIO18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO18";
st,retime-pin-mask = <0xf>;
};
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
tx = <&PIO17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>;
};
};
};
gmac0 {
pinctrl_mii0: mii0 {
st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>;
mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
};
};
pinctrl_gmii0: gmii0 {
st,pins {
};
};
pinctrl_rgmii0: rgmii0 {
st,pins {
phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>;
rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>;
rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>;
rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
};
};
};
};
pin-controller-fvdp-fe {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih416-fvdp-fe-pinctrl";
st,syscfg = <&syscfg_fvdp_fe>;
reg = <0xfd6bf080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
interrupts-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO100";
};
PIO101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
PIO102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO102";
};
};
pin-controller-fvdp-lite {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih416-fvdp-lite-pinctrl";
st,syscfg = <&syscfg_fvdp_lite>;
reg = <0xfd33f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
interrupts-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO103";
};
PIO104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
PIO105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
PIO106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
PIO107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO107";
st,retime-pin-mask = <0xf>;
};
};
};
};
View Git Blame Copy Permalink