2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 10:13:57 +08:00
linux-next/drivers/clocksource/timer-zevio.c
afzal mohammed cc2550b421 clocksource: Replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

A build error that was reported by kbuild test robot <lkp@intel.com>
in the previous version of the patch also has been fixed.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2020-02-27 12:15:24 +01:00

214 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/clocksource/zevio-timer.c
*
* Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#define IO_CURRENT_VAL 0x00
#define IO_DIVIDER 0x04
#define IO_CONTROL 0x08
#define IO_TIMER1 0x00
#define IO_TIMER2 0x0C
#define IO_MATCH_BEGIN 0x18
#define IO_MATCH(x) (IO_MATCH_BEGIN + ((x) << 2))
#define IO_INTR_STS 0x00
#define IO_INTR_ACK 0x00
#define IO_INTR_MSK 0x04
#define CNTL_STOP_TIMER (1 << 4)
#define CNTL_RUN_TIMER (0 << 4)
#define CNTL_INC (1 << 3)
#define CNTL_DEC (0 << 3)
#define CNTL_TOZERO 0
#define CNTL_MATCH(x) ((x) + 1)
#define CNTL_FOREVER 7
/* There are 6 match registers but we only use one. */
#define TIMER_MATCH 0
#define TIMER_INTR_MSK (1 << (TIMER_MATCH))
#define TIMER_INTR_ALL 0x3F
struct zevio_timer {
void __iomem *base;
void __iomem *timer1, *timer2;
void __iomem *interrupt_regs;
struct clk *clk;
struct clock_event_device clkevt;
char clocksource_name[64];
char clockevent_name[64];
};
static int zevio_timer_set_event(unsigned long delta,
struct clock_event_device *dev)
{
struct zevio_timer *timer = container_of(dev, struct zevio_timer,
clkevt);
writel(delta, timer->timer1 + IO_CURRENT_VAL);
writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
timer->timer1 + IO_CONTROL);
return 0;
}
static int zevio_timer_shutdown(struct clock_event_device *dev)
{
struct zevio_timer *timer = container_of(dev, struct zevio_timer,
clkevt);
/* Disable timer interrupts */
writel(0, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
/* Stop timer */
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
return 0;
}
static int zevio_timer_set_oneshot(struct clock_event_device *dev)
{
struct zevio_timer *timer = container_of(dev, struct zevio_timer,
clkevt);
/* Enable timer interrupts */
writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
return 0;
}
static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
{
struct zevio_timer *timer = dev_id;
u32 intr;
intr = readl(timer->interrupt_regs + IO_INTR_ACK);
if (!(intr & TIMER_INTR_MSK))
return IRQ_NONE;
writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
if (timer->clkevt.event_handler)
timer->clkevt.event_handler(&timer->clkevt);
return IRQ_HANDLED;
}
static int __init zevio_timer_add(struct device_node *node)
{
struct zevio_timer *timer;
struct resource res;
int irqnr, ret;
timer = kzalloc(sizeof(*timer), GFP_KERNEL);
if (!timer)
return -ENOMEM;
timer->base = of_iomap(node, 0);
if (!timer->base) {
ret = -EINVAL;
goto error_free;
}
timer->timer1 = timer->base + IO_TIMER1;
timer->timer2 = timer->base + IO_TIMER2;
timer->clk = of_clk_get(node, 0);
if (IS_ERR(timer->clk)) {
ret = PTR_ERR(timer->clk);
pr_err("Timer clock not found! (error %d)\n", ret);
goto error_unmap;
}
timer->interrupt_regs = of_iomap(node, 1);
irqnr = irq_of_parse_and_map(node, 0);
of_address_to_resource(node, 0, &res);
scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
"%llx.%pOFn_clocksource",
(unsigned long long)res.start, node);
scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
"%llx.%pOFn_clockevent",
(unsigned long long)res.start, node);
if (timer->interrupt_regs && irqnr) {
timer->clkevt.name = timer->clockevent_name;
timer->clkevt.set_next_event = zevio_timer_set_event;
timer->clkevt.set_state_shutdown = zevio_timer_shutdown;
timer->clkevt.set_state_oneshot = zevio_timer_set_oneshot;
timer->clkevt.tick_resume = zevio_timer_set_oneshot;
timer->clkevt.rating = 200;
timer->clkevt.cpumask = cpu_possible_mask;
timer->clkevt.features = CLOCK_EVT_FEAT_ONESHOT;
timer->clkevt.irq = irqnr;
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
writel(0, timer->timer1 + IO_DIVIDER);
/* Start with timer interrupts disabled */
writel(0, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
/* Interrupt to occur when timer value matches 0 */
writel(0, timer->base + IO_MATCH(TIMER_MATCH));
if (request_irq(irqnr, zevio_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL,
timer->clockevent_name, timer)) {
pr_err("%s: request_irq() failed\n",
timer->clockevent_name);
}
clockevents_config_and_register(&timer->clkevt,
clk_get_rate(timer->clk), 0x0001, 0xffff);
pr_info("Added %s as clockevent\n", timer->clockevent_name);
}
writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
writel(0, timer->timer2 + IO_CURRENT_VAL);
writel(0, timer->timer2 + IO_DIVIDER);
writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
timer->timer2 + IO_CONTROL);
clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
timer->clocksource_name,
clk_get_rate(timer->clk),
200, 16,
clocksource_mmio_readw_up);
pr_info("Added %s as clocksource\n", timer->clocksource_name);
return 0;
error_unmap:
iounmap(timer->base);
error_free:
kfree(timer);
return ret;
}
static int __init zevio_timer_init(struct device_node *node)
{
return zevio_timer_add(node);
}
TIMER_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init);